Hohenstein Releases 2024 Sustainability Report

BOENNIGHEIM, Germany — March 27, 2025 — Responsible action is a defining value for Hohenstein, a global testing and research provider. Its 2024 Sustainability Report provides transparency through documented progress and detailed insights into how sustainability is embedded. It covers both the existing sustainability measures at the Germany headquarters and the company’s goals for 2025 and beyond. The direct and indirect greenhouse gas emissions (Scope 1, 2 and 3) of its worldwide locations were recorded for the first time.

Hohenstein sees ecological, social and economic sustainability as success factors for the future and has taken important action over the past year:

  • Environmental: In addition to a new combined heat and power plant, a photovoltaic system was installed at the headquarters. An environmental team and the newly appointed environmental officer are supporting the environmental management system in accordance with EMAS (Eco-Management and Audit Scheme). Future reduction targets and measures will be comprehensively developed based on the initial greenhouse gas emissions.
  • Social: Through support, training and transparent exchange, Hohenstein is working to implement respectful cooperation with all its global employees. The work-life balance also remains a focus. An internal satisfaction survey shows that 85 percent of employees are satisfied or very satisfied with Hohenstein as an employer. Most of the improvements that employees suggested in the survey have been implemented.
  • Corporate Governance: Hohenstein management creates a motivating work environment by promoting autonomy, meaning and expertise. Regular colloquia and HR consultations were expanded to include additional formats for communicating with management and increasing exchange. The Sustainable Development team was expanded.

Hohenstein has been implementing various measures to protect the environment and conserve resources for decades. This was confirmed by external KEFF+Check in 2024. Next year, the goal will be further optimized as part of the EMAS introduction. “Sustainability and the responsible use of our planet’s resources are a matter of course for us,” explains CEO Dr. Stefan Droste. “The increasing number of extreme weather events around the world clearly shows that every individual is called upon to contribute to safeguarding our common future. For this reason, environmental and climate protection is a top priority at Hohenstein.”

The family-owned company wants to take responsibility, not only in its own sustainable actions, but also as a reliable partner for its customers: “2024 was characterized by new regulations. In the EU alone, numerous directives were adopted, but in some cases their introduction was postponed while their content is being finalized,” explained Katja Hetzer, Sustainability Development manager at Hohenstein. “We support our clients in developing a solid strategic direction and selecting suitable measures. Thanks to our expertise in various specialties, we cover many aspects, not only for the fulfilment of corporate due diligence obligations, but also for sustainable product development.”

Posted: March 27, 2025

Source: Hohenstein Institute America, Inc.

Bipartisan WIPPES Act Reintroduced In Congress To Provide National Standards On Do Not Flush Labeling For Non-Flushable Wet Wipes

CARY, N.C. — March 27, 2025 — INDA, the Association of the Nonwoven Fabrics Industry is thrilled to announce the reintroduction of the Wastewater Infrastructure Pollution Prevention and Environmental Safety (WIPPES) Act, sponsored by U.S. Senators Jeff Merkley (D-OR) and Susan Collins (R-ME), U.S. Representatives Lisa McClain (R-MI) and Kevin Mullin (D-CA).

INDA and its members have supported this bipartisan legislation since it was first introduced in the 117th Congress. Developed through years of collaboration between the nonwovens industry and wastewater stakeholders, this federal solution reflects the successes of similar “Do Not Flush” labeling requirements for non-flushable wipes already enacted in seven states. The WIPPES Act will establish a uniform national standard, ensuring that non-flushable wipes feature clear and prominent “Do Not Flush” labeling on their packaging.

“The reintroduction of the WIPPES Act represents years of bipartisan support in Congress and collaboration between our industry and wastewater agencies. This legislation, along with its companion bill, is poised to establish a single federal standard for ‘Do Not Flush’ labeling for wipes manufacturers which will ensure consumers in every market are informed on the proper disposal methods of the products they have purchased,” said Wes Fisher, INDA director of Government Affairs. “INDA appreciates the continued leadership of Senators Merkley and Collins, as well as Representative McClain, in advancing this important legislation. We are also pleased to welcome Representative Mullin as a sponsor and look forward to working together to drive meaningful progress on this issue.”

“INDA is proud to continue its support for the WIPPES Act, which was passed by the U.S. House of Representatives by an overwhelming bipartisan margin in 2024. The industry is committed to responsibly managing wipe products that are not designed to be flushable, protecting public infrastructure and the environment,” said INDA President Tony Fragnito. “The passage of this important legislation will have positive impacts on the environment, wastewater agencies, consumers, and manufacturers by mandating uniform ‘Do Not Flush’ labeling for covered products. This clear visual symbol, coupled with robust consumer education programs, are raising awareness about the proper disposal of these products. INDA applauds the sponsor’s vision to address this issue in a comprehensive and meaningful way. We look forward to our continued collaboration with the wastewater sector and other stakeholders to support this bill’s swift passage in Congress.”

The WIPPES Act (H.R. 2964) received strong bipartisan support during the 118th Congress. Last year, the bill was reported out of the House Committee on Energy and Commerce before it passed on the House floor by a vote of 351-56. This decisive, bipartisan vote reflects a shared commitment from both political parties to promoting clearer consumer guidance through standardized labeling requirements at the federal level, helping to protect wastewater infrastructure and ensure more responsible disposal practices. The legislation was not scheduled for a committee hearing in the Senate before the end of the 118th Congress.

INDA and our partners will continue to advocate for standardized labeling laws, both at the state and federal levels. Over the years, INDA has worked with lawmakers in seven states and counting to draft and pass “Do Not Flush” labeling requirements while promoting consumer education, notably in the projects carried out by the Responsible Flushing Alliance. These state-level laws have collectively contributed to improved “Do Not Flush” labeling on non-flushable wipes, serving as a foundation for the federal standards proposed in the reintroduced version of the WIPPES Act.

The latest text of the WIPPES Act (H.R. 2269 / S. 1092) can be accessed here.
The press release from Congressional sponsors can be found here.

For questions, contact Wes Fisher, Director of Government Affairs, wfisher@inda.org

Posted: March 27, 2025

Source: INDA, the Association of the Nonwoven Fabrics Industry

NRI Industrial Sales Inc. Expands Leadership In Circular Economy With European Market Growth

MISSISSAUGA, Ontario/WARSAW, Poland— March 27, 2025 — NRI Industrial Sales Inc. is redefining how businesses recover value from surplus industrial assets while minimizing environmental impact. As a specialist in industrial asset recovery and sustainable surplus management, the company has helped manufacturers and distributors across North America optimize their supply chains, reduce waste, and increase operational efficiency. Now, with its expansion into Europe, NRI Industrial is bringing its proven circular economy model to an even broader global audience.

Over the years, NRI Industrial has developed a strong reputation for its ability to recover, redistribute, and repurpose surplus assets. The company processes millions of pounds of industrial equipment and components annually, ensuring that valuable resources remain in circulation rather than becoming obsolete. Through advanced technology and an extensive global distribution network, NRI has successfully connected businesses with surplus solutions that reduce storage costs, streamline asset liquidation, and support environmental sustainability. By leveraging data-driven asset tracking and AI-powered inventory management, NRI continues to refine its approach to surplus recovery, ensuring maximum value and tax efficiency for its clients.

This expansion into Europe reflects NRI’s commitment to helping manufacturers and industrial partners improve their surplus asset management strategies. By working with European manufacturers, distributors, and system integrators, NRI is providing solutions that align with sustainability goals and evolving regulatory requirements. With the industrial sector placing greater emphasis on circular supply chains, this expansion positions NRI as a key player in the global movement toward waste reduction and responsible asset recovery. Companies across Europe will now have access to NRI’s expertise, ensuring they can seamlessly integrate surplus management into their operations while maintaining compliance with their regional sustainability policies.

To further highlight its impact and industry expertise, NRI Industrial will be exhibiting at ANEXPO 2025 from June 16-18 in Warsaw, a premier event dedicated to automation and industrial solutions. This opportunity allows NRI to connect with manufacturers and distributors seeking to improve their surplus management strategies. Attendees can gain insights into how NRI Industrial’s services can help transform their surplus assets into revenue and tax streams while reducing their environmental output, and learn how NRI Industrial can become a trusted partner in sustainable surplus logistics and management. As part of NRI Industrial’s presence at ANEXPO 2025, join us as we present the Revolutionizing the Circular Economy: NRI Industrial’s Role in Sustainable Asset Recovery topic with a focus on the sustainable asset recovery and the circular economy, and its impact on North America.

Companies are looking for innovative ways to optimize all their resources while meeting their environmental responsibilities. With a growing international footprint and a stronger European presence, NRI Industrial can help companies and industries deliver smart, sustainable solutions for surplus recovery.

NRI Industrial is offering one-on-one meetings at ANEXPO 2025 to help manufacturers and distributors explore tailored strategy solutions for surplus recovery. These individual discussions can provide a valuable opportunity for companies to learn how NRI Industrial can partner with them to strengthen their asset management strategies while reducing environmental impact. Companies can learn more about NRI Industrial’s services by visiting nrisolutions.com.

Posted: March 27, 2025

Source: NRI Industrial Sales Inc.

BASF Starts Up Its First Plant For Recycled Polyamide 6 — loopamid Now Commercially Available

LUDWIGSHAFEN, Germany/SHANGHAI, China — March 27, 2025 — BASF announced the start-up of the its commercial loopamid® plant. The production facility at the Caojing site in Shanghai, China, has an annual capacity of 500 metric tons and marks an important step in the supply of sustainable products for the textile industry. “The startup of this plant once again demonstrates BASF’s innovative strength,” said Stephan Kothrade, member of the Board of Executive Directors and chief technology officer of BASF SE. “As an integral part of our Winning Ways strategy, we utilize our chemistry to develop solutions for the biggest challenges of our time. loopamid transforms textile waste into a valuable resource, helps save raw materials and closes the textile loop.”

loopamid is a recycled polyamide 6 that is entirely based on textile waste. The new production facility supports the growing demand for sustainable polyamide 6 fibers in the textile industry. “I am proud of our team, which has worked with great passion and dedication to achieve the commercialization of loopamid,” said Ramkumar Dhruva, president of BASF’s Monomers division. “The technology behind loopamid allows textile-to-textile recycling for polyamide 6 in a wide variety of fabric blends, including those with elastane. I am convinced that loopamid not only makes a significant contribution to the textile circular economy, but also helps our customers achieve their sustainability goals.”

GRS certification for plant and loopamid products

The plant as well as the quantities of loopamid produced are certified according to the Global Recycled Standard (GRS). This certification guarantees to consumers and textile manufacturers that loopamid is made from recycled materials and that the production processes comply with specific environmental and social criteria. In addition, first yarn manufacturers are successfully using loopamid.

Post-industrial and post-consumer textile waste as basis for loopamid

To produce loopamid in its new plant, BASF currently utilizes industrial textile waste from textile manufacturing and will gradually increase the share of post-consumer waste. This feedstock includes cutting scraps, defective cuts, offcuts and other production textile waste from the textile industry. These materials are collected and provided to BASF by customers and partners. End-of-life garments made from polyamide 6 and other textile products can also be utilized for the production of loopamid. All these waste materials are challenging to recycle because they typically consist of a mixture of different fibers and materials as well as dyes and additives. Additionally, for post-consumer waste recycling, buttons, zippers and accessories must be removed in advance. BASF works closely with partners and customers to accelerate the development of collection and sorting systems.

loopamid®

With loopamid, BASF has developed an innovative solution to improve circularity in the fashion industry and recycle polyamide 6 textile waste. Due to its capability to tolerate all fabric mixtures like PA6 and elastane, the technology behind loopamid allows textile-to-textile recycling of post-industrial and post-consumer textile waste. The fibers and materials can be recycled over multiple cycles. At the same time, the material characteristics are identical to those of conventional virgin polyamide.

Posted: March 27, 2025

Source: BASF

ITMA ASIA + CITME, Singapore 2025 Launches Online Visitor Registration

SINGAPORE — March 27, 2025 — Online visitor registration for ITMA ASIA + CITME, Singapore 2025 which will be held October 28-31, 2025, is now open with early registrants enjoying a 50-percent discount from the onsite rates.

Visitors who purchase their badge online will enjoy early bird rates of S$50 for a four-day badge and S$25 for a one-day badge. These attractive rates are available until 28 September at www.itmaasiasingapore.com.

After the early bird phase, visitors can register with standard online rates at S$60 for a four-day badge and S$30 for a one-day badge. Onsite rates during the exhibition are S$100 and S$50 for a four-day and one-day badge respectively. All rates include the Goods and Services Tax (GST).

Billed as The Leading Textile Technology Exhibition Driving Regional Growth, ITMA ASIA + CITME, Singapore 2025 is expected to attract visitors from the surrounding textile and garment production hubs.

Alex Zucchi, president of CEMATEX, said: “Textile manufacturers from South Asia, Southeast Asia and the Middle East are anticipating the exhibition as a strategic platform to source advanced machinery solutions to help them optimise production efficiency, increase output volumes, and enhance product quality to meet growing market demands.”

Gu Ping, president of the China Textile Machinery Association (CTMA), elaborated, “As a premier trade exhibition, ITMA ASIA + CITME, Singapore 2025 highlights cutting-edge textile production solutions by leading technology owners. By facilitating targeted business discussions, it enables textile machinery manufacturers and industry professionals to forge regional collaboration opportunities, working together to shape a smarter future for the textile industry.”

The chairman of the Indonesian Textile Association (API) Jemmy Kartiwa Sastraatmadja who also serves as chairman of the ASEAN Textile Industry Federation (AFTEX), agreed: “The joint exhibition in Singapore is a useful platform for the textile industry in ASEAN. The modern technology on display will help contribute to the competitiveness of the textile and garment industry.”

Sastraatmadja added: “It is important for exhibitions such as this to be held regularly. Updating technology and global trends must be a consideration for the sustainable future of the textile and garment industry. In line with the global textile industry that increasingly prioritises environmentally friendly production methods, there must also be a focus on how to overcome production waste and garment waste.”

Exhibitor stand allocation

According to the show owners, CEMATEX (the European Committee of Textile Machinery Manufacturers), China Textile Machinery Association (CTMA) and the Sub-Council of Textile Industry, CCPIT (CCPIT TEX), over 770 exhibitors from 33 countries and regions have been allotted stand space at the Singapore Expo.

The exhibitor list will be available on the website and mobile app in June. For the latest updates, visit www.itmaasiasingapore.com.

Posted: March 27, 2025

Source: CEMATEX, CTMA & CCPIT TEX

Oerlikon Barmag WINGS FDY FLEX — One Year Later, It Is Time For A Summary

REMSCHEID, Germany— March 27, 2025 — At last year’s ITMA Asia, Barmag, a subsidiary of the Swiss Oerlikon Group with its product brands Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven, presented WINGS FDY FLEX, the latest member of the WINGS family. One year later, it is time for a summary.

Oerlikon Barmag WINGS FDY FLEX

More flexibility for a demanding yarn market: WINGS FDY FLEX opens up a wide range of products for quality-oriented yarn manufacturers.

The company set out with the aim of offering a WINGS for the entire range of polyester FDY yarns. Fast-moving trends, the demand for a wide variety of special yarn types — the textile market is currently confronting yarn manufacturers with constantly changing requirements. To meet these demands, extreme flexibility on the part of producers is essential.

Successful under production conditions

The all-rounder WINGS FDY FLEX has already impressed two Asian yarn manufacturers over the past twelve months. With Bico yarns, rPET, Full Dull and Semi Dull, Cationic Dyable and dope dyed, as well as other specialty products, the range of WINGS FDY FLEX is unique in the WINGS family. Especially in the low denier range, the new addition beats the competition by far. Hence, WINGS FDY FLEX manages the balancing act between class and mass with ease.

The special configuration of the stretching area allows the processing of a wide range of specialty products with a WINGS concept.

Another plus point: compared to the competition, WINGS FDY FLEX produces at higher speeds with the exceptionally high full winding rates that WINGS is known for. Hence, the system concept is unbeaten in terms of economic efficiency. In addition, there are the familiar features of the WINGS concept: significantly faster feeding and exceptional user-friendliness – the core competence of all WINGS family members – make production more efficient, cause less waste and increase the safety of the operating personnel. The new, patented tangling technology tailored to the flexible processes also ensures the excellent yarn processability typical of WINGS.

Part of a strong family

The WINGS FDY portfolio is complemented by the PLUS and PLUS ECO variants. Their strengths lie primarily in the economical production of first-class semi-dull and trilobal bright yarns. The WINGS concept has also been tried and tested in the PA6 process. Since its market launch in 2020, WINGS has been the first choice for polyamide 6 producers all over the world. 

Posted: March 27, 2025

Source: Barmag, a subsidiary of the Swiss Oerlikon Group

Industry Heavyweights Join Samsara Eco To Accelerate Its Enzymatic Recycling Technology

CANBERRA, Australia — March 25, 2025 — Australian biotech company Samsara Eco has expanded its global leadership team with the appointment of material science and engineering veterans, Brock Thomas as chief innovation officer and Isaac Iverson as executive product director. Thomas and Iverson bring decades of experience working within the polymer space in the United States and will lead the scaling of the company’s enzymatic recycling technology and first-of-a-kind facilities.

Thomas joins from global specialty materials company, Eastman, where he spent almost 15 years. During his time at Eastman, he worked with tire additives, specialty copolyesters, and led the Polyester Renewal Technology platform. He was most recently the director of Plastics and Circular Development where he provided technology support to build the company’s polyester depolymerization facility and led cross-functional teams to improve and scale production across the copolyester stream.

Iverson joins with an extensive background in nylon. He spent 15 years at INVISTA in a number of research and development and commercial roles, building out the company’s nylon product offering across various industries.

On the appointments, Paul Riley, CEO and founder of Samsara Eco, said: “We’re at a pivot point in our scale-up journey. We need the best minds with both deep technical knowledge and commercial acumen to lead us forward. Thomas’ proven track record in scaling lab operations, building and starting up pilot facilities, and providing technology support to commercial depolymerization plants will be vital as we continue to refine our technology processes, build new facilities and scale operations in the coming years.”

“Likewise, Iverson’s unique blend of technical and commercial expertise and extensive global network will be invaluable as we continue to build out our offerings and work with customers and partners to meet their circularity goals.”

The company’s new plant in Jerrabomberra, New South Wales, is set to open mid-year and will become the home base for Samsara Eco as it scales up production and furthers develops its suite of AI-crafted enzymes. Its first-of-a-kind nylon 6,6 enzymatic recycling plant is also planned to be operational by 2027. Thomas and Iverson will play an important role in both developments. More broadly, they will focus on accelerating innovation, enhancing Samsara’s enzymatic recycling process and supporting commercial growth.

On joining Samsara Eco, Thomas, said: “Enzymatic recycling has the potential to redefine circularity. Recycling is no longer limited by material composition but opens a range of possibilities to keep more plastics in circulation, without emitting additional carbon in the process. The science, technical and operations teams at Samsara Eco are second to none, and I look forward to working closely with them as we scale operations and push the boundaries of innovation to help transform the future of sustainable materials.”

Iverson also commented: “I’m proud to join Samsara Eco and help achieve its ambitions to make plastics truly circular. The company has already made great strides in four short years, working with brands to bring enzymatically recycled materials to market. I’m looking forward to further opening new pathways to market and unlocking the potential of enzymes to infinitely recycle plastics.”

Since launching in 2021, Samsara Eco has led world-first discoveries in enzymatic recycling, pioneering the ability to recycle mixed plastics and fibres including nylon 6,6, nylon 6 and polyester to keep plastics and textiles in circulation and out of landfill. In 2024, it created the world’s first enzymatically recycled nylon 6,6 garment with lululemon, the Swiftly top, and also launched a jacket range made from its enzymatically recycled polyester.

Thomas and Iverson will divide their time between Australia and the United States.

Posted: March 27, 2025

Source: Samsara Eco

FastSewn Launches Fully Automated Seg Sewing Machine Technology With Laser Cutting

AARHUS, Denmark — March 25, 2025 — FastSewn, a provider of sewing machine automation, is thrilled to announce that we will be at the Henderson Sewing Machine Company Booth 2531 at TexProcess in Atlanta from May 6-8, 2025  We will be demonstrating our Patent Pending Moving Conveyor Technology (MCT) as well as presenting videos of this groundbreaking technology showing feeding directly from rolls of textile, full CNC patterned sewing, followed by cutting to shape along with samples will be available. The new FastSewn sewing & laser cutting solution promises to revolutionize the way sewing enthusiasts and professionals approach their craft, with a host of innovative features designed to enhance precision, speed, and ease of use. Please stop by to see how FASTSEWN can meet your production needs.

The FastSewn Automated CNC Flatbed Sewing & Laser Cutting Solution

The FastSewn solution is the result of years of research and development, aimed at addressing the needs and challenges faced in the manufacture of technical textiles and printed textile graphics through their needs for sewing.

In every other step in the process, from design, to print, to cutting to shape, automation is available. But with sewing, especially in the west, it is hard to find, train, motivate and keep sewers that are good at their jobs. FastSewn solves that dilemma with a system that is as easy to use as the flatbed cutters you are already using.

Key Features and Benefits

  • Accurate Stitching Technology: The FastSewn solution sews with the same accuracy and versatility you have in the other process for textile manufacture. Limited training is required, and the system can be run by the same person who runs your grand format printers. In an interesting new addition to the system, the 2nd layer can be the dispensing and sewing of SEG keder onto printed signage.
  • High-Speed Performance: With a maximum sewing speed of 3,000 stitches per minute, the FastSewn machine allows users to complete their projects faster without compromising on quality.
  • Enhanced Precision: The machine is equipped with a computerized system that ensures consistent stitch quality and precision, making it easier for users to achieve professional results.
  • Automatic feeding, sewing and cutting of SEG keder is now available eliminating the need for manual sewers.
  • User-Friendly Interface: The intuitive touch screen interface simplifies the sewing process, allowing users to easily select and customize their preferred stitch patterns and settings.
  • Durability and Reliability: Built with high-quality materials, the FastSewn machine is designed to withstand rigorous use and provide long-lasting performance.
  • Quiet Operation: The machine operates with minimal noise, ensuring a comfortable and pleasant sewing and cutting experience.

Foundation Customer Commitment

Early users of the FastSewn sewing & cutting solution will play a major part in its early first years of operation. FastSewn has taken orders for the delivery of Beta Systems in Q4 2025. Once they provide stable performance, deliveries to an additional 15-25 Foundation Customers will begin. The members of this Foundation Group will make a purchase commitment to FastSewn, and in return will have the first right to access the technology during continued development and have the first opportunities to become early adopters while helping to accelerate the delivery of a useful solution to the marketplace. FastSewn is currently looking for additional group members to work with us to finalize the system’s development to meet industry needs. Sales Director, Jim Manelski, will be at the VTX Tools booth to meet those who are interested.

Solutions from FastSewn

Systems are available in four with and lengths, with manual roll feeders. Motorized feeders are an option, as well as knife cutting tools.  Available in 1.2M, 1.8M, 2.2M and 3.3M sizes, with both manual and motorized roll-off units

Posted: March 27, 2025

Source: FastSewn – Mikkelsen Innovation ApS

Trützschler Spinning: Next-Generation Carding Machine TC 30i — Outstanding Results In Cotton And Man-Made Fiber Applications

MÖNCHENGLADBACH, Germany — March 26, 2025 — Yarn manufacturers across markets worldwide are experiencing the positive impact of Trützschler’s next- generation carding machine, the TC 30i. Since it was launched in January 2024, this machine has proven top quality and higher productivity for both man-made fiber and cotton applications.

The TC 30i is designed to maximize process efficiency and product quality for spinning. Due to its intelligent, self-optimizing functions it achieves consistent results from any raw material while reducing or eliminating the demand for operator intervention. The machine has already proven up to 40-percent higher productivity in man-made fiber applications. In recent trials with cotton applications, customers in Indonesia and Türkiye have achieved outstanding results, too.

Big benefits for Budi Texindo Prakarsa

From left to right: Rajesh Pandiyan (Adviser Budi Texindo Prakarsa), Giyanto Miskun (Mill Manager Budi Texindo Prakarsa) and Hans Rütten (Area Manager Indonesia at Trützschler).

Budi Texindo Prakarsa is a spinning mill based in Indonesia, specialized in the production of premium cotton yarn with an annual capacity of 80,000 spindles. In recent trials with the TC 30i, they produced 100-percent cotton yarn (Ne 20 to Ne 30) via ring-combed processes. Compared to the previous benchmark, productivity increased by up to 30 percent with the same IPI quality level. At the same time, energy and air consumption per kilogram have been reduced.

Measurable advantages for Mem Tekstil

In Türkiye, Mem Tekstil is one of the largest integrated manufactures in the textile sector. Their products range from knitting, dyeing, rotation and digital printing to ring spinning, open-end spinning and vortex spinning. With Trützschler’s TC 30i they produced a yarn (Ne 20) made from 100 % cotton soft waste via open-end (OE) spinning. Its engineers tested the TC 30i because they are considering upgrading older card models from a Swiss competitor. Our machine has increased productivity from 70 kilograms per hour to 160 kilograms per hour with the same or better quality. This shows once again that modernization can be worthwhile.

Super results for SAFTEKS

From left to right: Ahmet Öztürkmen (Trützschler Türkiye Sales Engineer), Ali Saglam (Trützschler Türkiye Area Manager), Kazim Vurur (Mill Manager of SAFTEKS), Mehmet Dogan (Trützschler Technologist), Birger Gluth (Trützschler Service Technician).

SAFTEKS is another Trützschler customer located in Türkiye. The company produces cotton yarns with a monthly production capacity of 2,100 tons. It uses OE spinning to manufacture 100-percent cotton yarn (Ne 20) from 40-percent virgin cotton and 60-percent cotton soft waste. Swapping its cards for the TC 30i made it possible for SAFTEKS to increase its output capacity from 70 tons per day to 85 tons per day. That is a productivity boost of more than 20 percent, with the same level of quality.

Promising results for PT Dhanar Mas Concern in man-made fiber applications

From left to right: Kevin A. Sastraatmadja (Director Danar Mas), Hans Rütten (Area Manager Indonesia at Trützschler) and Lukàs Koubek (Deputy Regional Inspector at Trützschler).

PT Dhanar Mas Concern (Danar Mas) is an Indonesian company dedicated to the production of high-quality textile products. The company specializes in spinning yarns and manufacturing greige fabrics. They use the TC 30Si card, which is specially customized for man-made fibers. In recent trials with the TC 30Si, Danar Mas produced a ring carded polyester yarn (Ne 20 to Ne 30) and a viscose yarn (Ne 30 to Ne 40) via vortex spinning. In both applications, the next-generation card produced 125 kg/h of material at the same IPI quality level, up to 40 percent more than the company produces with its current benchmark.

Making a positive impact on cotton yarn production

How did these Trützschler customers achieve such remarkable success for carding cotton with the TC 30i? First, because the T-GO automated gap optimizer improves quality by enabling the smallest and most precise carding gaps – far beyond anything possible with manual settings. Second, the TC 30i maximizes quality and productivity by increasing the number of active flats without sacrificing flexibility in the pre- and post-carding areas due to the larger cylinder diameter. And third, the TC 30i minimizes cotton waste because it features a new and highly precise mote knife at the first licker-in. Customers can automatically optimize and adjust the mote knife settings to meet their specific needs. Combined with the impact of our WASTECONTROL feature, this significantly reduces material waste.

Proven positive impact

The next-generation card TC 30i has earned popularity in main textile markets by achieving proven results in real-world operating conditions — for cotton yarn and for man-made fibers. It is suitable for a uniquely broad range of applications, including fine count (with the TC 30Fi model) and recycling (with the TC 30Ri model). All orders from the last few months are now being installed, so that the TC 30i can demonstrate its positive impact on productivity and quality at many more mills worldwide.

Posted: March 27, 2025

Source: Trützschler Spinning  / The Trützschler Group SE

Andrew Bernard Promoted To Vice President/General Manager Of Shade & Marine Business Unit At Glen Raven

BURLINGTON, N.C. — March 25, 2025 — Glen Raven is pleased to announce the promotion of Andrew Bernard to vice president/general manager of the Shade & Marine Business Unit. In this role, Bernard will lead the business unit in delivering short-term results while shaping a strategic roadmap for long-term growth.

Andrew Bernard

Bernard brings 17 years of experience at Glen Raven, holding positions of increasing responsibility across technical and commercial functions. Most recently, he served as senior director of Planning & Supply Chain, where he played a key role in optimizing operations and improving customer lead times. His tenure at Glen Raven has included roles in quality engineering, research and development, manufacturing management, business development, and commercial operations.

Bernard holds a Master of Science in Textile Engineering & Statistics from NC State University. His leadership experience spans multiple functional areas, including supply chain, customer service, and corporate planning, with a track record of driving operational efficiency and business growth.

In his new role, Bernard will oversee the Shade & Marine Business Unit, with Charlie Withers, director of Sales, and Elizabeth Gulley, senior product manager, reporting to him. He will report to Joesph Davis, president, Glen Raven Material Solutions Group.

“Andrew’s promotion is a testament to his strong leadership, deep industry knowledge and commitment to Glen Raven. Over the past 17 years, he has demonstrated an exceptional ability to connect strategy with execution across a wide range of roles,” said Joesph Davis, president of Glen Raven Material Solutions Group. “I’m confident that under Andrew’s leadership, the Shade & Marine Business Unit will continue to thrive and grow. I look forward to continuing to work with him in this next chapter.”

Outside of work, Bernard enjoys playing sports, spending time at the beach, and coaching youth athletics.

Posted: March 27, 2025

Source: Glen Raven / Sunbrella

1...767778...2,562Page 77 of 2,562

Sponsors

Breaking News

Load more

Digital Issue

2025 Quarterly Issue Number III

View Latest Digital Issue

FEATURED ARTICLES

© Copyright 2017 Textile Industries Media Group, LLC.