Cognex Presents Sensor Software Frame Grabber

Cognex Corp., Natick, Mass., has developed its In-Sight® Explorer software for use with its line of
In-Sight vision sensors. The software simplifies vision application development and configuration;
offers secure, password-protected operation; and enables efficient management of vision sensor
networks.

Cognex also has introduced its cost-effective MVS-8501 frame grabber for use with high-speed
analog cameras that use the newest progressive scan CCD sensor technology. Its single-channel
architecture supports up to four multiplexed cameras, and it also is compatible with standard speed
analog interlaced and progressive scan cameras.

February 2004

Xetma Installs Finishing Systems In Brazil, Germany

The Xetma Group, with locations in Germany and Switzerland, has supplied an Optima XPPS
double-polishing and shearing unit to Dohler S.A., Brazil.

Xetma’s Multisystem XREB raising, emerizing and brush-sueding system has been installed at
Lauffenmuhle GmbH and Kufner Textilwerke GmbH, both based in Germany.

February 2004

Cooley Engineers PVC-Free Medical Membrane Compound

Cooley Specialty Products, Pawtucket, R.I., has introduced Cooley MedGuard, a polyolefin-based
polymer membrane for medical end-uses.

According to the company, a division of the Cooley Group, Cooley MedGuard is polyvinyl
chloride (PVC)-free, incinerable and weldable. “Cooley is able to produce a quality membrane which
not only performs as well as PVC-based products, but also supports advanced waste management
systems,” said Al Behbehani, business manager.

February 2004

Quality Fabric Of The Month: Fooling The Experts

The HammockSource®, Greenville, N.C., has introduced DuraCord® weather-resistant, solution-dyed rope hammocks, offered through The Original Pawleys Island Rope Hammock® and Hatteras Hammocks® lines. Touted as a durable, colorfast, affordably priced alternative to cotton or polyester hammocks, DuraCord also offers the softness and comfort associated with those fibers. It is available in five colorways and is cleaned easily using soap and water and/or bleach.

The yarn used in DuraCord was developed for the company by Chapel Hill, N.C.-based American Fibers and Yarns Co.’s (AF&Y’s) Technology Center in Bainbridge, Ga. It is one of a series of value-added products in which all performance properties are incorporated directly into the
filament. Inherent properties include approximately 0.05-percent moisture regain; moisture transfer; colorfastness; light weight; and stain, abrasion, chemical and bacteria resistance. AF&Y has applied its Marquésa® technology to modify a basic man-made industrial yarn and
improve the aesthetics and hand, adding ultraviolet inhibitors and further antimicrobial enhancements to prevent degradation from outdoor exposure.

hammock
DuraCord® hammocks dry quickly and withstand the degrading effects of sun and
rain.

“AF&Y has capitalized on the technology used in industrial yarns, changed the properties and brought it into new markets,” said Jim Morelli, executive vice president, AF&Y. “Through a series of modifications, we have developed a product that has the look and feel of a cotton product.” AF&Y also has created yarns that mimic the aesthetics and hand of acrylic, rayon and polyester. The products offer environmentally friendly alternatives to those fibers because they require less energy and water to manufacture.

Jay Branch, president, The HammockSource, explained that customers expect cotton-like softness in a hammock, but cotton is not especially durable when left outdoors for long periods. Man-made fibers such as polyester and acrylic may be soft and offer certain durability advantages, but they also are lacking in others.

Branch said The HammockSource worked with several companies to find a yarn that would deliver cotton-like softness in a durable, colorfast material. “We finally went with AF&Y because it was the most responsive and had the best product,” he said. “In fact, DuraCord is so similar to cotton in feel that even a veteran cotton salesman was fooled when shown a selection of cords that included a cotton sample among all the DuraCord samples.

“The first DuraCord hammocks were introduced to dealers last summer, and they’re going like gangbusters,” Branch said. Their success has prompted the company to introduce hammocks made with DuraWeb® webbing, and it is developing designs for a quilted hammock made with DuraWeave® fabrics. The company’s DuraWeb hammock recently won a Design Excellence award from the International Casual Furniture and Accessories Market in Chicago.


For more information about DuraCord®, contact Jay Branch (800) 334-1078.

For more information about American Fibers and Yarns Co., contact Nikki Rainey (864)
235-5651.

January 2004

Avondale Mills Uses American Software ERP Solution

Atlanta-based American Software Inc.
has licensed components of its e-Intelliprise™ suite of enterprise resource planning (ERP) software
and e-Forms to Avondale Mills Inc., Monroe, Ga. The suite is a total ERP/supply chain management
solution, and the e-Forms enable conversion of paper-based documents to electronic formats.


January 2004

SDL Atlas Named SDC Enterprises Master Distributor

England-based SDC Enterprises, the
commercial arm of the Society of Dyers and Colourists, has named SDL Atlas Ltd., also based in
England, as a master distributor of its complete range of quality control products.

SDC Enterprises chose SDL Atlas because of its extensive global network and expert technical
support. “The combination of the highest quality test materials with SDL Atlas service and support
will offer customers a complete added value testing solution,” said Mark Yare, commercial director,
SDC Enterprises.

SDL Atlas agents, distributors and service centers are located in more than 80
countries.


January 2004

XeBusiness Supplies Xe-RTS Technology To FOTL, Burberry

XeBusiness Ltd., England, is
supplying its Real Time Manufacturing Control System (Xe-RTS) to Fruit of the Loom (FOTL)
International, Ireland, and Burberry, England. Xe-RTS is a manufacturing control, time and
attendance, and work-in-progress management system.

FOTL is installing Xe-RTS at a major manufacturing facility in Morocco. Burberry is using
the system at its Castleford plant in West Yorkshire.


January 2004



SSM Stähle-Eltex Moves To New Home

Germany-based SSM Stähle-Eltex GmbH
has moved into a new production facility in order to respond to increased demand for its
air-texturing machinery and allow future expansion. The new plant is located at Storlachstrasse 4,
D-72760 Reutlingen, Germany.

The company’s SSM DP2-T series air-texturing machines are used to manufacture yarns up to
900 decitex (dtex), and the high-performance RM3-T series for yarns up to 3,200 dtex. At ITMA 2003,
it introduced the RM3-S, which is used to draw and heat-set filament sewing threads and twisted
technical filament yarns; and the DS3-U Uniplex, which processes Uniplex™ spun yarn using the
stretch-break principle. The Uniplex process was developed in collaboration with DuPont,
Wilmington, Del.

SSM Stähle-Eltex is represented in the United States by Symtech Inc., Spartanburg.


January 2004

Lectra Celebrates 30 Years


Paris-based Lectra recently
celebrated its 30th anniversary. The company was established in 1973 as Lectra Systèmes in
Bordeaux, France, by Jean and Bernard Etcheparre, developers of the LECteur-TRAceur 200 system for
automatic calculation and tracing of all sizes for an apparel style.

Lectra began expanding in 1976, when investment banker André Harari, current chairman,
assisted the company in forming a business plan and securing financing for future growth. André and
Daniel Harari, current CEO, took control of the company in 1991 following a financial setback, and
merged their investment firm with Lectra in 1998.

hararis

Daniel Harari, CEO (left); and André Harari, chairman, Lectra



During the 1990s, the company debuted
the Vector computer-aided cutting system, which it now offers for specific market sectors. It also
expanded into aerospace, automotive, footwear, and furniture and furnishings markets, as well as
internationally.

The company shortened its name to Lectra in 2001. It has continued to grow, and today claims
the number-one position globally for CAD/CAM software and equipment for textile and composite
end-users.




January 2004



Nano-Tex Wins Best Of Small Tech Award

Greensboro, N.C.-based Nano-Tex LLC recently received Small Times magazines 2003 Best of Small Tech
Company Award. The Best of Small Tech Awards recognize the best companies, people and products in
micro-electro-mechanical systems, microsystems and nanotechnology.

David Soane, Nano-Tex founder, was named a finalist in the Innovator category. George
Henderson, former chairman and CEO of parent company Burlington Industries Inc., Greensboro, was a
finalist in the Business Leader category for his efforts to introduce NANO-TEX fabric treatments to
textiles.

Various Nano-Tex technologies provide softness, water repellency, stain resistance, stain
release and/or hydrophobic properties to fabrics.

January 2004

Sponsors