Aquapak Polymers Appoints Nonwoven Expert To Its Advisory Board To Support Global Market Drive

BIRMINGHAM, England — September 5, 2023 — Aquapak Polymers Ltd., which specializes in polymer-based material technologies which deliver both performance and environmental responsibility at scale, has today announced the appointment of leading U.S. nonwoven industry expert, Dr. Kyra Dorsey, to its Advisory Board, which comprises business leaders and experts in material science and the environment. Her appointment is an extension of Aquapak’s market development strategy with a specific focus on tapping into the growing global demand from end use industries such as hygiene and healthcare, thanks to the versatility and cost-effectiveness of nonwoven material.

Kyra will support Aquapak in bringing its innovative Hydropol™ technology to full-scale commercialization in the nonwoven sector using her extensive development experience in spunmelt, composite, carded, wetlaid, and chemical applications. Hydropol is a highly functional, specialty environmental polymer that allows product design to support the circular economy — by enabling recycling and delivering multiple end-of-life options. It is designed to be an alternative to traditional plastics, offering their versatility and functionality but without harming the environment.

Kyra has over two decades of experience developing products for a variety of markets and application end uses such as wipes, hygiene, medical, industrial and specialty, and food and beverage. She has a doctorate in Chemical Engineering from the Georgia Institute of Technology. Her nonwoven journey began at the Georgia Institute of Technology with a thesis on fiber formation in meltblowing. She has recently founded Glory Group LLC, a nonwoven consulting firm to serve the nonwoven industry, having spent 11 years at Suominen Nonwovens in both commercial and technical leadership roles and, prior to that she was at Ahlstrom for six years.

Commenting on Kyra’s appointment, Mark Lapping, CEO, Aquapak, said: “The market opportunity for Hydropol technology is huge and Kyra brings nonwoven experience which is second to none. Her technical knowledge and understanding of the nonwoven sector will help us identify opportunities for Hydropol as manufacturers look for new, sustainable ways to produce products such as flushable wipes for personal care and household use, which offer all the functionality without the environmental impact.”

Commenting on the role, Dr. Kyra Dorsey, said: “Hydropol™ is a very exciting proposition which has the potential to transform the use of conventional plastics in the nonwovens market. It is of great value to the innovative brands who are ready to do things differently and for consumers who are keen to recycle more.”

Aquapak has successfully developed and commercialized Hydropol, which is soluble, non-toxic and marine safe. Products made with Hydropol are safe for existing recycling processes and are fully biodegradable, leaving no trace or plastic pollution should they enter the environment. As an enabling technology, Hydropol can be used on its own or in combination with other materials to enhance recyclability, compostability and end-of-life options. Its material properties allow for scalability into diverse types of products and its solubility makes it easy to separate from other materials when recycling.

Posted: September 5, 2023

Source Aquapak Polymers Ltd.

Pindler Launches Silk Collection

MOORPARK, Calif. — August 31, 2022 — For some time, Pindler’s clients have asked for a collection of easy-to-use silk fabrics with ageless patterns. Pindler’s design team has delivered, and the Silk Collection is now available to add a polished, luxurious and classic look to a space.

The Silk Collection includes seven timeless silk-blend patterns — solids, checks, plaids and stripes — in a spectrum of colors. These much-requested, ageless designs are sure to become staples in the Pindler line.

The fabrics pay homage to traditional design elements while the soft, dreamy colors and clean, crisp neutrals keep the collection current. The Silk Collection includes classic solids, plus gingham checks and plaids available in both small and midscale options. A selection of tailored stripes rounds out this stunning group, ensuring this versatile collection will become a go-to selection for any style and scheme.

The fabrics in the Silk Collection are woven in a silk-blend taffeta construction, which lends itself to being a workhorse in a variety of applications from drapery to upholstery and more. Taffeta is a crisp, plain weave that when woven with silk yarns produces a refined, lustrous and luxurious appearance.

The Silk Collection is available online, as well as at Pindler’s 16 corporate showrooms and nine agent showrooms across the U.S., and two agent showrooms in Canada.

Posted September 5, 2023

Source: Pindler

Xeros Launches XF3, An External Microfiber Filtration Device

ROTHERHAM, England — August 30, 2023 — Xeros Technology has announced the launch of a new product, XF3, an external version of its patented, market-leading washing machine filtration device, XFilter™.

Xeros’ XFilter is a high-performing washing machine filtration device. It captures more than 99 percent of microplastics and 80 percent of polycotton microfibres released during a washing cycle, preventing them from being released into the world’s oceans and waterways. XFilter is designed for upmost consumer ease, requiring no replacement cartridges and has one of the lowest emptying frequencies of all available filters.

Xeros has now taken that innovation and created an external, stand-alone filtration device that can be attached to any washing machine model. The product is expected to be launched to consumers in 2024 and is available immediately for licensing and branding partners.

Microfibers — fibers less than 5 millimeters — from synthetic textiles are contributing to the global plastic crisis. Every year more than half a million tonnes of microfibres are released into the world’s oceans simply from washing our clothes.* Research shows that microfibres from synthetic textiles (known as microplastics) are the biggest source of primary microplastic pollution in our oceans.* It is reported that microplastic pollution has increased 10-fold since 2005, with over 171 trillion microplastic particles now floating in our oceans.**

“XF3 enables our patented, high-performing microfibre filtration system, XFilter to be housed as a stand-alone solution that can be attached to any washing machine model,” said Neil Austin, CEO at Xeros. “The market for accessory sales of washing machine microfibre capture device is expected to be significant in Europe in the next few years and XF3 has been created as a plug and play solution to meet that demand.”

To make the product even more consumer friendly, XF3 can be installed at any height enabling its sleek modular design to sit on a countertop or under a sink. It is programmed to automatically start when the washing machine drains and has an alert when it needs emptying, enabling users to simply plug it in and leave it to work with complete peace of mind.

* Boucher, J. & Friot, D. International Union for Conservation of Nature. Primary microplastics in the oceans: a global evaluation of sources (2017)

** Erikson, M. et al. A growing plastic smog, now estimated to be over 170 trillion plastic particles afloat in the world’s oceans. Plos One. (2023).

Posted September 5, 2023

Source: Xeros

Manufacturing PMI® At 47.6 Percent; August 2023 Manufacturing ISM® Report On Business® — Apparel, Leather & Allied Products; Furniture & Related Products; And Textile Mills Report Contraction

TEMPE, Ariz. — September 1, 2023 — Economic activity in the manufacturing sector contracted in August for the 10th consecutive month following a 28-month period of growth, say the nation’s supply executives in the latest Manufacturing ISM® Report On Business®.

The report was issued today by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Management® (ISM®) Manufacturing Business Survey Committee:

“The August Manufacturing PMI® registered 47.6 percent, 1.2 percentage points higher than the 46.4 percent recorded in July. Regarding the overall economy, this figure indicates a ninth month of contraction after a 30-month period of expansion. The New Orders Index remained in contraction territory at 46.8 percent, 0.5 percentage point lower than the figure of 47.3 percent recorded in July. The Production Index reading of 50 percent is a 1.7-percentage point increase compared to July’s figure of 48.3 percent. The Prices Index registered 48.4 percent, up 5.8 percentage points compared to the July figure of 42.6 percent. The Backlog of Orders Index registered 44.1 percent, 1.3 percentage points higher than the July reading of 42.8 percent. The Employment Index registered 48.5 percent, up 4.1 percentage points from July’s reading of 44.4 percent.

“The Supplier Deliveries Index figure of 48.6 percent is 2.5 percentage points higher than the 46.1 percent recorded in July. This is the highest reading in the past 11 months. (Supplier Deliveries is the only ISM® Report On Business® index that is inversed; a reading of above 50 percent indicates slower deliveries, which is typical as the economy improves and customer demand increases.)

“The Inventories Index decreased by 2.1 percentage points to 44 percent; the July reading was 46.1 percent. The New Export Orders Index reading of 46.5 percent is 0.3 percentage point higher than July’s figure of 46.2 percent. The Imports Index remained in contraction territory, registering 48 percent, 1.6 percentage points lower than the 49.6 percent reported in July.”

Fiore continues, “The U.S. manufacturing sector shrank again, but the uptick in the PMI indicates a slower rate of contraction. The August composite index reading reflects companies managing outputs appropriately as order softness continues, but the month-over-month increase is a sign of improvement. Demand eased again, with the (1) New Orders Index contracting at a slightly faster rate, (2) New Export Orders Index continuing in contraction territory, with minimal signs of improvement and (3) Backlog of Orders Index improving for the third straight month but remaining at low levels. The Customers’ Inventories Index reading indicated appropriate buyer/supplier tension, which is neutral to slightly positive for future production. Output/Consumption (measured by the Production and Employment indexes) was positive, with a combined 5.8-percentage point upward impact on the Manufacturing PMI calculation. Panelists’ companies stabilized production compared to July and continued to manage head counts, primarily through attrition. Inputs — defined as supplier deliveries, inventories, prices and imports — continued to accommodate future demand growth. The Supplier Deliveries Index indicated faster deliveries for the 11th straight month, and the Inventories Index remained in contraction territory as panelists’ companies continued to mitigate inventories exposure. The Prices Index remained in ‘decreasing’ territory but increased a respectable 5.8 percentage points, signifying near price stability. Sentiment improved regarding manufacturing lead times, although they remain at elevated levels.

“Of the six biggest manufacturing industries, three — Transportation Equipment; Food, Beverage & Tobacco Products; and Petroleum & Coal Products — registered growth in August.

“Demand remains soft, but production execution is consistent with new, reduced output levels based on panelists’ companies order books. Suppliers continue to have capacity. Prices are generally stable. Sixty-two percent of manufacturing gross domestic product (GDP) contracted in August, down from 92 percent in July, a positive trend for the economy. Additionally, the share of manufacturing GDP registering a composite PMI® calculation at or below 45 percent — a good barometer of overall manufacturing weakness — was 15 percent in August, compared to 25 percent in July and 44 percent in June, a clear positive,” says Fiore.

The five manufacturing industries that reported growth in August are: Printing & Related Support Activities; Transportation Equipment; Food, Beverage & Tobacco Products; Petroleum & Coal Products; and Miscellaneous Manufacturing. The 13 industries reporting contraction in August — in the following order — are: Apparel, Leather & Allied Products; Furniture & Related Products; Plastics & Rubber Products; Primary Metals; Fabricated Metal Products; Textile Mills; Electrical Equipment, Appliances & Components; Chemical Products; Computer & Electronic Products; Paper Products; Wood Products; Nonmetallic Mineral Products; and Machinery.

What Respondents Are Saying

“Further reductions in customer orders due to the economic situation and also their working down of own inventories. Backlog is dwindling, but still showing robust revenue.” [Computer & Electronic Products]

“Demand still weak. Customer inventories are getting depleted; however, we are not seeing a real uptick in demand. General supply conditions are softening.” [Chemical Products]

“Still seeing a slowdown in orders. We’re continuing to ship to max capacity, with supply constraints still a real part of our day-to-day business operations.” [Transportation Equipment]

“Customer orders have softened. This is likely due to customers’ increased confidence in the supply chain, (which) has them reducing their inventories. Customers are also being pinched with higher interest rates. Additionally, consumers are feeling their purchasing power eroded by stubbornly high inflation, so they are purchasing less.” [Food, Beverage & Tobacco Products]

“Fourth quarter orders falling short of projection and indicating a slowdown in customer demand, though the first quarter forecast remains solid. Unclear if this is an inventory correction. Logistics stabilized and costs are matching 2019. Shortages limited to only a few items now, but suppliers are hesitant to add or replace labor needed in light of slowing demand.” [Fabricated Metal Products]

“General slowdown in business at the end of the third quarter. For capital equipment additions, our customers are buying only what they need for specific jobs and not adding any capital fleet material for potential future work.” [Machinery]

“There is additional softening in the market. Customers are hesitant to provide extended forecasts with today’s economic uncertainty.” [Electrical Equipment, Appliances & Components]

“Business continues to remain strong with sales and profits both ahead of plan. The bookings were below what we planned, but that was expected due to fewer working days and summer vacations.” [Miscellaneous Manufacturing]

“The manufacturing sector continues to be slow, and the low market prices make it difficult to stay profitable. On the positive side, laborers are showing enthusiastic employment interest. Rising energy and fuel prices are of concern to our company.” [Paper Products]

“Business is beginning to improve moderately. Still well below 2022 levels, but it appears that the ‘great inventory rebalancing’ is finally coming to fruition.” [Plastics & Rubber Products]

“Automotive volume remains strong in preparation for the United Auto Workers’ potential strike at Ford, General Motors and Stellantis. Contingency plans in place for sub-tiers. Continue to have issues recruiting general labor employees. Operational efficiency suffering due to a lack of human resources. Order book remains strong and ahead of 2022.” [Primary Metals]

“(The Federal Reserve’s) actions to increase borrowing costs has dampened demand for residential investment. Recently, this slowdown plateaued somewhat, with demand stabilizing. The outlook for 2024 remains uncertain, and we continue to be cautious about building inventories.” [Wood Products]

MANUFACTURING AT A GLANCE
August 2023
Index Series
IndexAug
Series
IndexJul
Percentage

Point

Change

Direction Rate of
Change
Trend*
(Months)
Manufacturing PMI® 47.6 46.4 +1.2 Contracting Slower 10
New Orders 46.8 47.3 -0.5 Contracting Faster 12
Production 50.0 48.3 +1.7 Unchanged From Contracting 1
Employment 48.5 44.4 +4.1 Contracting Slower 3
Supplier Deliveries 48.6 46.1 +2.5 Faster Slower 11
Inventories 44.0 46.1 -2.1 Contracting Faster 6
Customers’ Inventories 48.7 48.7 0.0 Too Low Same 3
Prices 48.4 42.6 +5.8 Decreasing Slower 4
Backlog of Orders 44.1 42.8 +1.3 Contracting Slower 11
New Export Orders 46.5 46.2 +0.3 Contracting Slower 3
Imports 48.0 49.6 -1.6 Contracting Faster 10
OVERALL ECONOMY Contracting Slower 9
Manufacturing Sector Contracting Slower 10

Manufacturing ISM® Report On Business® data is seasonally adjusted for the New Orders, Production, Employment and Inventories indexes.
*Number of months moving in current direction.

Commodities Reported Up/Down In Price And In Short Supply

Commodities Up in Price
Bearings; Crude Oil; Diesel Fuel; Electrical Components (10); Natural Gas* (2); Steel* (2); and Steel Products* (2).

Commodities Down in Price
Aluminum (3); Aluminum Products; Caustic Soda (2); Corrugate Boxes; Natural Gas* (2); Paper (4); Plastic Resins (15); Polypropylene (4); Steel* (5); Steel — Hot Rolled (4); Steel — Scrap; Steel — Stainless (2); Steel Plates; and Steel Products* (3).

Commodities in Short Supply
Automation Equipment; Electrical Components (35); Electrical Transmission Products; Electronic Components (33); Hydraulic Components (3); Rolling Stock; Semiconductors (33); and Valves.

Note: The number of consecutive months the commodity is listed is indicated after each item.
*Indicates both up and down in price.

August 2023 Manufacturing Index Summaries

Manufacturing PMI®
The U.S. manufacturing sector contracted in August, as the Manufacturing PMI registered 47.6 percent, 1.2 percentage points higher than the reading of 46.4 percent recorded in July. “This is the 10th month of contraction and continuation of a downward trend that began in June 2022. That trend is reflected in the Manufacturing PMI’s 12-month average falling to 47.8 percent. Of the five subindexes that directly factor into the Manufacturing PMI, none are in growth territory. Of the six biggest manufacturing industries, three (Transportation Equipment; Food, Beverage & Tobacco Products; and Petroleum & Coal Products) registered growth in August. The New Orders Index logged a 12th month in contraction territory. For a third straight month, none of the 10 subindexes were above 50 percent,” Fiore said. A reading above 50 percent indicates that the manufacturing sector is generally expanding; below 50 percent indicates that it is generally contracting.

A Manufacturing PMI above 48.7 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the August Manufacturing PMI indicates the overall economy contracted for a ninth consecutive month after 30 straight months of expansion. “The past relationship between the Manufacturing PMI and the overall economy indicates that the August reading (47.6 percent) corresponds to a change of minus-0.4 percent in real gross domestic product (GDP) on an annualized basis,” says Fiore.

The Last 12 Months

Month Manufacturing
PMI®
Month Manufacturing
PMI®
Aug 2023 47.6 Feb 2023 47.7
Jul 2023 46.4 Jan 2023 47.4
Jun 2023 46.0 Dec 2022 48.4
May 2023 46.9 Nov 2022 49.0
Apr 2023 47.1 Oct 2022 50.0
Mar 2023 46.3 Sep 2022 51.0
Average for 12 months – 47.8

High – 51.0

Low – 46.0

 

New Orders
ISM’s New Orders Index contracted for the 12th consecutive month in August, registering 46.8 percent, a decrease of 0.5 percentage point compared to July’s reading of 47.3 percent. “Of the six largest manufacturing sectors, only one (Transportation Equipment) reported increased new orders. New order levels contracted at a faster rate compared to July, but production was steady month to month and backlog contraction eased, signs that companies are adjusting to the new demand forecasts predicted for the balance of the year,” says Fiore. A New Orders Index above 52.7 percent, over time, is generally consistent with an increase in the Census Bureau’s series on manufacturing orders (in constant 2000 dollars).

The four manufacturing industries that reported growth in new orders in August are: Nonmetallic Mineral Products; Textile Mills; Paper Products; and Transportation Equipment. Nine industries reported a decline in new orders in August, in the following order: Electrical Equipment, Appliances & Components; Furniture & Related Products; Petroleum & Coal Products; Fabricated Metal Products; Computer & Electronic Products; Machinery; Miscellaneous Manufacturing; Plastics & Rubber Products; and Chemical Products.

New Orders %Higher %Same %Lower Net Index
Aug 2023 17.2 59.9 22.9 -5.7 46.8
Jul 2023 15.4 61.2 23.4 -8.0 47.3
Jun 2023 17.7 57.7 24.6 -6.9 45.6
May 2023 16.3 54.0 29.7 -13.4 42.6

 

Production
The Production Index registered 50 percent (“unchanged” status) in August, 1.7 percentage points higher than the July reading of 48.3 percent, after two months of contraction preceded by one month of expansion and five months of contraction before that. “Of the top six industries, three — Transportation Equipment; Machinery; and Food, Beverage & Tobacco Products — expanded in August. Production output is being effectively managed given current new order rates, company profitability targets and the desire to slow backlog declines,” says Fiore. An index above 52.2 percent, over time, is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures.

The five industries reporting growth in production during the month of August are: Printing & Related Support Activities; Transportation Equipment; Machinery; Food, Beverage & Tobacco Products; and Miscellaneous Manufacturing. The seven industries reporting a decrease in production in August — in the following order — are: Plastics & Rubber Products; Textile Mills; Nonmetallic Mineral Products; Primary Metals; Fabricated Metal Products; Chemical Products; and Electrical Equipment, Appliances & Components. Six industries reported no change in production in August compared to July.

Production %Higher %Same %Lower Net Index
Aug 2023 21.0 58.7 20.3 +0.7 50.0
Jul 2023 16.4 64.3 19.3 -2.9 48.3
Jun 2023 15.0 68.1 16.9 -1.9 46.7
May 2023 20.6 59.5 19.9 +0.7 51.1

 

Employment
ISM’s Employment Index registered 48.5 percent in August, 4.1 percentage points higher than the July reading of 44.4 percent. “The index indicated employment contracted for a third month after two months of expansion preceded by two months of contraction. Of the six big manufacturing sectors, two (Machinery; and Transportation Equipment) expanded. Labor management sentiment at Business Survey Committee respondents’ companies continue to indicate a slowdown in hiring, reflected by attrition, freezes and layoffs. In August, attrition was the primary source of head-count reductions; this method is slower compared to hiring freezes or layoffs, which suggests that panelists’ companies are not driven by reducing labor costs. Right-sizing workforces is the primary goal, providing companies time to manage the trajectory as near- and moderate-term demand remains uncertain,” says Fiore. An Employment Index above 50.4 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.

Of 18 manufacturing industries, two reported employment growth in August: Machinery; and Transportation Equipment. The eight industries reporting a decrease in employment in August, in the following order, are: Textile Mills; Nonmetallic Mineral Products; Paper Products; Primary Metals; Computer & Electronic Products; Electrical Equipment, Appliances & Components; Food, Beverage & Tobacco Products; and Fabricated Metal Products. Eight industries reported no change in employment in August compared to July.

Employment %Higher %Same %Lower Net Index
Aug 2023 14.0 68.0 18.0 -4.0 48.5
Jul 2023 9.4 73.2 17.4 -8.0 44.4
Jun 2023 15.5 68.1 16.4 -0.9 48.1
May 2023 17.0 67.2 15.8 +1.2 51.4

 

Supplier Deliveries†
The delivery performance of suppliers to manufacturing organizations improved for the 11th straight month in August, as the Supplier Deliveries Index registered 48.6 percent, 2.5 percentage points higher than the 46.1 percent reported in July. The index registered 52.4 percent in September 2022, went into contraction territory in October and has been there since, with an average reading of 45.5 percent for the last nine months. Of the top six manufacturing industries, three (Petroleum & Coal Products; Food, Beverage & Tobacco Products; and Transportation Equipment) reported slower deliveries. “Panelists’ comments continue to indicate that suppliers’ performance is improving, in most cases. The index recorded its best performance since September 2022, when it registered 52.4 percent,” says Fiore. A reading below 50 percent indicates faster deliveries, while a reading above 50 percent indicates slower deliveries.

The seven manufacturing industries reporting slower supplier deliveries in August — in the following order — are: Textile Mills; Petroleum & Coal Products; Food, Beverage & Tobacco Products; Miscellaneous Manufacturing; Primary Metals; Transportation Equipment; and Paper Products. The seven industries reporting faster supplier deliveries in August as compared to July — in the following order — are: Wood Products; Furniture & Related Products; Chemical Products; Plastics & Rubber Products; Machinery; Fabricated Metal Products; and Computer & Electronic Products.

Supplier Deliveries %Slower %Same %Faster Net Index
Aug 2023 10.9 75.4 13.7 -2.8 48.6
Jul 2023 7.9 76.3 15.8 -7.9 46.1
Jun 2023 9.3 72.7 18.0 -8.7 45.7
May 2023 7.2 72.6 20.2 -13.0 43.5

 

Inventories
The Inventories Index registered 44 percent in August, 2.1 percentage points lower than the 46.1 percent reported for July. “Manufacturing inventories contracted at a faster rate compared to July. Of the six big industries, only Food, Beverage & Tobacco Products increased manufacturing inventories in August. Panelists’ companies continue to watch manufacturing inventory levels judiciously as future demand remains uncertain. The readings of 44 percent in June and August are the index’s lowest since January 2014 (43.9 percent),” says Fiore. An Inventories Index greater than 44.4 percent, over time, is generally consistent with expansion in the Bureau of Economic Analysis (BEA) figures on overall manufacturing inventories (in chained 2000 dollars).

Of 18 manufacturing industries, the three reporting higher inventories in August are: Food, Beverage & Tobacco Products; Electrical Equipment, Appliances & Components; and Miscellaneous Manufacturing. The 11 industries reporting contracting inventories in August — in the following order — are: Apparel, Leather & Allied Products; Textile Mills; Paper Products; Primary Metals; Furniture & Related Products; Fabricated Metal Products; Chemical Products; Computer & Electronic Products; Machinery; Plastics & Rubber Products; and Transportation Equipment.

Inventories %Higher %Same %Lower Net Index
Aug 2023 10.4 70.2 19.4 -9.0 44.0
Jul 2023 12.8 64.9 22.3 -9.5 46.1
Jun 2023 8.2 71.6 20.2 -12.0 44.0
May 2023 13.5 63.8 22.7 -9.2 45.8

 

Customers’ Inventories†
ISM’s Customers’ Inventories Index registered 48.7 percent in August, matching its reading for July. “Customers’ inventory levels are again at an appropriate tension, as panelists report their companies’ customers have the proper amount of inventory, a potential slight positive for future production,” Fiore said.

The seven industries reporting customers’ inventories as too high in August are, in order: Plastics & Rubber Products; Furniture & Related Products; Paper Products; Electrical Equipment, Appliances & Components; Computer & Electronic Products; Fabricated Metal Products; and Primary Metals. The five industries reporting customers’ inventories as too low in August are: Textile Mills; Food, Beverage & Tobacco Products; Transportation Equipment; Machinery; and Chemical Products.

Customers’
Inventories
%
Reporting
%Too
High
%About
Right
%Too
Low
 

Net

 

Index

Aug 2023 75 14.9 67.6 17.5 -2.6 48.7
Jul 2023 75 16.6 64.1 19.3 -2.7 48.7
Jun 2023 73 15.6 61.2 23.2 -7.6 46.2
May 2023 77 20.8 61.1 18.1 +2.7 51.4

 

Prices†
The ISM Prices Index registered 48.4 percent, 5.8 percentage points higher compared to the July reading of 42.6 percent, indicating raw materials prices decreased in August for the fourth consecutive month. The index increased compared to July (indicating a slower rate of price decreases) after a plunge into contraction (or “decreasing”) territory in May. “Panelists’ comments indicate that buyers and suppliers continue to aggressively negotiate price levels as commodity markets remain moderately volatile. Of the top six manufacturing industries, two (Petroleum & Coal Products; and Computer & Electronic Products) reported price increases in August. Eighty-four percent of panelists’ companies reported ‘same’ or ‘lower’ prices in August, compared to 86 percent in July,” says Fiore. A Prices Index above 52.9 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) Producer Price Index for Intermediate Materials.

In August, the five industries that reported paying increased prices for raw materials are: Nonmetallic Mineral Products; Petroleum & Coal Products; Plastics & Rubber Products; Computer & Electronic Products; and Miscellaneous Manufacturing. The 10 industries reporting paying decreased prices for raw materials in August — in the following order — are: Textile Mills; Primary Metals; Furniture & Related Products; Fabricated Metal Products; Electrical Equipment, Appliances & Components; Paper Products; Food, Beverage & Tobacco Products; Transportation Equipment; Chemical Products; and Machinery.

Prices %Higher %Same %Lower Net Index
Aug 2023 16.4 63.9 19.7 -3.3 48.4
Jul 2023 13.9 57.4 28.7 -14.8 42.6
Jun 2023 11.2 61.1 27.7 -16.5 41.8
May 2023 15.4 57.5 27.1 -11.7 44.2

 

Backlog of Orders†
ISM’s Backlog of Orders Index registered 44.1 percent, a 1.3-percentage point increase compared to July’s reading of 42.8 percent, indicating order backlogs contracted for the 11th consecutive month (though at a slower rate in August) after a 27-month period of expansion. Of the six largest manufacturing sectors, only Chemical Products expanded order backlogs in August. “The index remains in moderate-to-strong contraction with a third straight month of slowing contraction, the result of improvements in new order rates and panelists’ companies executing lower production levels,” Fiore said.

The four industries reporting growth in order backlogs in August are: Printing & Related Support Activities; Textile Mills; Paper Products; and Chemical Products. The nine industries reporting lower backlogs in August — in the following order — are: Furniture & Related Products; Electrical Equipment, Appliances & Components; Computer & Electronic Products; Wood Products; Plastics & Rubber Products; Food, Beverage & Tobacco Products; Fabricated Metal Products; Machinery; and Miscellaneous Manufacturing.

Backlog of
Orders
%
Reporting
%Higher %Same %Lower Net Index
Aug 2023 90 14.9 58.3 26.8 -11.9 44.1
Jul 2023 91 11.9 61.8 26.3 -14.4 42.8
Jun 2023 90 8.3 60.8 30.9 -22.6 38.7
May 2023 91 10.8 53.3 35.9 -25.1 37.5

 

New Export Orders†
ISM’s New Export Orders Index registered 46.5 percent in August, 0.3 percentage point higher than the July reading of 46.2 percent. “The New Export Orders Index indicated that export orders contracted for the third month in a row in August after being unchanged in May, preceded by nine straight months in contraction territory and 25 months of expansion from July 2020 to July 2022. Comments continue to note the weak performance in order levels, especially from China,” Fiore said.

The two industries reporting growth in new export orders in August are: Paper Products; and Transportation Equipment. The nine industries reporting a decrease in new export orders in August — in the following order — are: Electrical Equipment, Appliances & Components; Food, Beverage & Tobacco Products; Primary Metals; Miscellaneous Manufacturing; Plastics & Rubber Products; Computer & Electronic Products; Fabricated Metal Products; Chemical Products; and Machinery.

New Export
Orders
%
Reporting
%Higher %Same %Lower Net Index
Aug 2023 73 7.6 77.7 14.7 -7.1 46.5
Jul 2023 71 5.8 80.8 13.4 -7.6 46.2
Jun 2023 71 8.0 78.6 13.4 -5.4 47.3
May 2023 71 9.0 81.9 9.1 -0.1 50.0

 

Imports†
ISM’s Imports Index registered 48 percent in August, a decrease of 1.6 percentage points compared to July’s figure of 49.6 percent. “Imports contracted for the 10th consecutive month, at a faster rate in August. Reduced imports are consistent with slowing demand. Shipping capacity and prices remain accommodative,” Fiore said.

The three industries reporting an increase in import volumes in August are: Primary Metals; Transportation Equipment; and Machinery. The nine industries that reported lower volumes of imports in August — listed in the following order — are: Wood Products; Furniture & Related Products; Paper Products; Computer & Electronic Products; Plastics & Rubber Products; Miscellaneous Manufacturing; Chemical Products; Electrical Equipment, Appliances & Components; and Food, Beverage & Tobacco Products. Six industries reported no change in imports in August compared to July.

Imports %
Reporting
%Higher %Same %Lower Net Index
Aug 2023 84 7.2 81.5 11.3 -4.1 48.0
Jul 2023 82 8.6 82.0 9.4 -0.8 49.6
Jun 2023 83 10.8 76.9 12.3 -1.5 49.3
May 2023 84 7.7 79.2 13.1 -5.4 47.3

†The Supplier Deliveries, Customers’ Inventories, Prices, Backlog of Orders, New Export Orders, and Imports indexes do not meet the accepted criteria for seasonal adjustments.

Buying Policy
The average commitment lead time for Capital Expenditures in August was 170 days, a decrease of four days compared to July. Average lead time in August for Production Materials was 87 days, an increase of three days. Average lead time for Maintenance, Repair and Operating (MRO) Supplies was 42 days, a decrease of four days compared to July.

Percent Reporting
Capital
Expenditures
Hand-to-
Mouth
30 Days 60 Days 90 Days 6 Months 1 Year+ Average
Days
Aug 2023 17 3 8 14 32 26 170
Jul 2023 15 4 8 14 32 27 174
Jun 2023 17 5 8 11 30 29 175
May 2023 16 7 5 13 32 27 172
Percent Reporting
Production
Materials
Hand-to-
Mouth
30 Days 60 Days 90 Days 6 Months 1 Year+ Average
Days
Aug 2023 8 22 28 26 10 6 87
Jul 2023 9 26 26 23 10 6 84
Jun 2023 8 26 23 28 10 5 83
May 2023 8 25 29 21 12 5 84

 

Percent Reporting
MRO Supplies Hand-to-
Mouth
30 Days 60 Days 90 Days 6 Months 1 Year+ Average
Days
Aug 2023 27 38 18 13 4 0 42
Jul 2023 29 36 18 11 5 1 46
Jun 2023 26 38 18 12 5 1 47
May 2023 30 34 18 13 4 1 45

 

Posted: September 4, 2023

Source Institute for Supply Management

New Chapter In Life At NETZSCH Pumpen & Systeme GmbH

WALDKRAIBURG, Germany — September 2, 2023 — Their eyes were shining, and there was a smile on their mouths. In addition to the anticipation, the 19 young people were excited about the new phase of their lives ahead of them this Friday morning. As every year on September 1, also in 2023, numerous new apprentices started their careers at NETZSCH Pumps & Systems in Waldkraiburg.

In the coming years, they will take their first steps in everyday working life at the specialist for conveying complex media in eight different apprenticeships. In addition to apprentices as industrial clerk, industrial mechanics, technical product designers, IT specialists for application development and system integration, and specialists for warehouse logistics and process mechanics, there is also an industrial electronics technician.

The excitement and anticipation about the upcoming phase of their lives were literally written all over the faces of the new apprentices. Nevertheless, the new apprentices Alexander Reiter, Andreas Kapser, Anna Maria Tratzl, Benjamin Winterer, Claudia Kiefinger, Christoph Schönberger, Daniel Huber, Julia Holzner, Korbinian Grill, Leni Hargasser, Leo Schindler, Leon Schönfeld, Markus Tauschhuber, Martin Geisberger, Maurice Douma, Paul Hipetinger, Raphael Bleicher, Samuel Spitlbauer and Sebastian Hütter had to clarify a few organisational things before they could start into the upcoming weeks. Following the welcome by the trainers in the Wolfgang Netzsch Arena at the NETZSCH Campus in Waldkraiburg and an initial short training session, buttered pretzels and cool drinks were served in a relaxed atmosphere. After the break, the new apprentices met Jens Heidkötter, managing director of NETZSCH Pumpen & Systeme GmbH. He addressed warm words to the new colleagues at the start of their new phase in life and was proud of the opportunities offered to the them.

“On behalf of the entire management, I would like to warmly welcome you. For the first time in the history of NETZSCH Pumpen & Systeme GmbH, we are all working together at one location in Waldkraiburg, and you will also benefit from this fact. The NETZSCH Campus offers outstanding working conditions and guarantees training at the very highest level with our new, state-of-the-art training facility and the NETZSCH Future Hub, a separate learning and recreation area for the apprentices. Therefore, you will be optimally prepared for your future career. This is something you can look forward to”, says Heidkötter.

Afterwards, a short game to get to know each other as well as the trainers and the youth and trainee representatives, was on the agenda. The new apprentices couldn’t believe that the first day in their working life had already ended and the weekend was just around the corner – time to process the new impressions. Before they go to their respective departments on Monday afternoon, they will have lunch together and a tour around the NETZSCH Campus. Finally, the next highlight is just around the corner: The apprentices excursion. The bus will take them to Voestalpine in Linz before they turn the night into day at the Western theme park in Pullman City, where team building is the main focus.

Dear apprentices, welcome to the NETZSCH family, and good luck with the new phase of your life!

Posted: September 4, 2023

Source: NETZSCH Pumpen & Systeme GmbH

Registration Is Open For The ITMF Annual Conference 2023 November 4-6, 2023, In Keqiao, China

ZÜRICH, Switzerland — September 4, 2023 — The ITMF Annual Conference 2023 is co-hosted by the China National Textile and Apparel Council (CNTAC) and the Shaoxing Municipal People’s Government and will feature international industry experts from around the world from along the entire textile value chain — from fibers to retail.

More than 500 high-level representatives from the entire textile value chain from China and around the world are expected to attend.

Under the general theme “Digitalization & Circularity – Megatrends Shaping the Textile Industry” experts from the industry and academia will shed light on how the textile value chain is coping with these trends and will help better understand the underlying dynamics and identifying the risks and opportunities. In the various sessions, experts will discuss among other topics

  • How the fiber markets will adapt to the increasing demand for recycled fibers;
  • How the textile industry can reduce the carbon footprint;
  • How new technologies will accelerate the industry’s transition towards more circularity; or
  • How upcoming regulation will impact production around the world.

In addition, ITMF will once again recognize the winners of the

  • ITMF Start-up Awards 2023;
  • ITMF Sustainability & Innovation Awards 2023; and
  • ITMF International Collaboration Awards 2023.

In conjunction and coordination with the ITMF Annual Conference 2023, there will be two more events that will take place in Keqiao, namely:

  • 10th Belt & Road Textile Conference 2023 (November 2-3); and
  • 6th World Textile Merchandising Conference (WTMC) 2023 (November 5-6).

More info about the conference can be found at: https://www.itmf.org/conferences/annual-conference-2023

ITMF is an international forum for the world’s textile and related industries, dedicated to keeping the world-wide membership constantly informed through surveys, studies and publications, participating in the evolution of the industry’s value chain and through the organization of annual conferences as well as publishing considered opinions on future trends and international developments.

Posted: September 4, 2023

Source: International Textile Manufacturers Federation (ITMF)

ACIMIT: Giorgio Calculli Appointed New Managing Director

Giorgio Calculli

MILAN, Italy — September 4, 2023 — Giorgio Calculli has been appointed new managing director of ACIMIT, the Association of Italian Textile Machinery Manufacturers. A law graduate with a Master’s degree in training and employment policies, he has been on staff at ACIMIT since 2006 as head of the Association’s training, internal relations and technical department. Calculli takes over as ACIMIT managing director from Federico Pellegata, who after 25 years managing the Association has been appointed CEO of ACIMIT Servizi S.r.l., the company set up by ACIMIT to provide services in support of associated member companies for the promotion of the Italian textile machinery industry in Italy and abroad.

“It has been a truly enriching experience,” asserted Federico Pellegata, “for which I am grateful to our associated members, ACIMIT’s Board, and the Association’s presidents who have served during my years in ACIMIT. However, my commitment to continue to promote the Italian textile machinery sector by no means ends here. As CEO of ACIMIT Servizi, I will continue to work relentlessly to ensure that ITMA, the world’s primary textile machinery trade fair, remains a representative showcase for the success of Italian manufacturers in the sector, as has been the case for the editions of the exhibition held in Italy in 2015 and 2023.”

ACIMIT managing director Giorgio Calculli commented: “I wish to thank the Board of ACIMIT for the appointment and for the opportunity to lend continuity to the work carried out by Federico Pellegata, for whom the success enjoyed at the latest edition of ITMA is only the most evident expression. I will work to further develop the membership base and ensure member companies receive maximum support from the Association in their business activities.”

Posted: September 4, 2023

Source: ACIMIT, the Association of Italian Textile Machinery Manufacturers

Kelheim Fibres And Magnolab Join Forces For Textile Innovation And Sustainability

KELHEIM, Germany — September 4, 2023 — The viscose specialty fiber manufacturer Kelheim Fibres has entered into a collaboration with MagnoLab, an international network of companies in the textile industry based in the Biella region. This partnership highlights the importance of collaboration between different companies to drive innovation and sustainability in the textile industry. Kelheim Fibres, a pioneer in the development of sustainable viscose fibers, sees itself not only as a fiber supplier but also as an innovation partner for the entire industry. Through its Open Innovation approach, Kelheim Fibres fosters the exchange of ideas and knowledge to jointly develop sustainable solutions for the future.

Kelheim Fibres operates several pilot and technical facilities itself. The close collaboration with MagnoLab, which boasts an impressive array of state-of-the-art textile machinery, allows for even more efficient research and development.

Dr. Marina Crnoja-Cosic, director New Business Development, Marketing & Communications at Kelheim Fibres, emphasizes the advantages of the collaboration: “Through close networking with the companies organized under MagnoLab, we can produce small quantities of samples and prototypes using various technologies. This enables us to develop solutions based on our specialty fibres that can be directly transferred to our partners’ production facilities within the textile value chain.”

Giovanni Marchi, president of MagnoLab, also expressed his enthusiasm: “Kelheim Fibres is the first fibre manufacturer we are collaborating with. Together, we now cover the complete textile chain, making our work even more valuable.

“The cooperation allows for practical testing, accelerating the implementation of innovations. It also contributes to a closer networking of the European (and thus regional) value chain. Thanks to shorter transport routes within Europe, not only is the environmental impact reduced, but also the realization of innovations in Europe is facilitated.

Posted: September 4, 2023

Source: Kelheim Fibres

adidas Launch Adizero Control Apparel In Second Collaboration Bringing RHEON™ Reactive Support To Athletes

LONDON — September 1, 2023 — adidas has launched its second apparel collection featuring RHEON™ technology from RHEON Labs®, the Adizero Control running collection. The apparel pieces in the Adizero Control collection feature the RHEON patented reactive super polymer, which provides unparalleled energy control to help athletes improve their performance.

Simon Huntsman, Commercial Director and Head of Reactivewear at RHEON Labs: “In a world of elite sport, incremental gains can be the difference between the podium and last place. Until now, athletes have been losing energy — and therefore performance — through unwanted muscle movement or ‘shearing’. But apparel featuring RHEON works like a reactive exoskeleton, reducing muscle inefficiencies and those small fractional losses of performance.

“The RHEON material ensures that this energy is not lost by positioning muscles into the most efficient position, so more energy is directed into performance, helping athletes to unlock those few extra percentage points when performing at their limits. RHEON is highly strain-rate sensitive. Like running on wet sand, it is naturally soft and flexible but stiffens up the faster it is stretched. In activewear this unlocks a new world of performance apparel that is barely noticeable during everyday use, yet highly supportive in high-intensity movements.”

Using existing manufacture to bring new benefits

RHEON is strategically placed across major muscles. The strands are strain-rate sensitive, meaning the material is soft and flexible, but instantly becomes more rigid and supports when the wearer is performing high-intensity movements. This means the Adizero Control apparel provides all-around support during activity without being restrictive or overly compressive.

Strands are designed using proprietary geometries by RHEON Labs. The shape, size and placement of each piece is ergonomically designed using computer modelling to offer the optimal support for key muscle groups during exercise.

The manufacture of the collection has also been carefully overseen to ensure that RHEON works to the best effect. The RHEON Labs and adidas teams have worked closely with tier one manufacturers to ensure that the application of the panels works within existing manufacturing processes for lamination, using settings which preserve the energy absorption qualities of the material.

RHEON™ era of materials performance gains industry backing

RHEON technology has combined years of biomechanical research with complex chemistry in a way that will unlock a new world of athlete potential and shape a new era of performance.

RHEON Labs first joined forces with adidas to design and unveil the TechFit Control collection in March 2023.

RHEON Labs is currently working with university experts to test and verify the performance gains its material can deliver to athletes. Early results from RHEON Labs in-house testing indicates the material has the potential to control four times more energy than conventional elastane-based textiles, significantly increasing support during high-intensity movements.

Posted: September 1, 2023

Source: RHEON Labs ®

Albany International Completes Acquisition Of Heimbach Group

ROCHESTER, N.H. — August 31, 2023 — Albany International Corp. announced today it has completed its acquisition of Heimbach Group. Headquartered in Düren, Germany, Heimbach is a global supplier of paper machine clothing for the production of all grades of paper and cardboard on all machine types as well as high-tech textile products used in a variety of sectors, such as the food processing, chemicals, construction materials and automotive industries.

Daniel Halftermeyer, president of Machine Clothing, said: “We are excited about the opportunities to create additional value for our shareholders and customers through the increased scale, complementary technologies and broader geographic footprint this transaction provides. Together we will effectively combine the strengths of each company to set a new standard in customer value delivery as the industry’s partner-of-choice.”

Albany acquired Heimbach for 132 million euros in cash, and assumed net debt of approximately 22 million euros. The transaction was funded with cash held in Europe.

Heimbach Group

Headquartered in Düren, Germany, Heimbach has been a trusted paper machine clothing manufacturer for more than two centuries and serves customers principally in European and Asian markets from its nine production facilities located in the same regions. Heimbach serves customers with comprehensive machine clothing products and services across the spectrum of pulp and paper grades.

Posted: August 31, 2023

Source: Albany International Corp.

Sponsors