MILAN — November 13, 2023 — A delegation of 12 Italian textile machinery manufacturers will be on hand at the ITME Africa trade show, to be held in Nairobi (Kenya) from November 30th to December 2nd 2023. These Italian companies will be exhibiting at the Italian Pavilion, organized by ACIMIT, the Association of Italian Textile Machinery Manufacturers, and by the Italian Trade Agency.
Kenya’s economy is among the most dynamic in sub-Saharan Africa, with annual GDP growth rates of around 6%. Its textile and garments industry ranks among the Country’s leading economic revenue sources, and is supported by government programs aimed at sustaining growth, as well as international agreements, such as the Economic Partnership Agreement (EPA) between the European Union and Kenya, currently in the process of ratification.
The total value of Kenya’s imports of textile machinery reached Euros 24 million in 2022. In the future, demand from local companies will mainly focus on high-end and medium to high-end technology, thus allowing Italian manufacturers to strengthen their market share in Kenya. Currently, Italian imports amount to approximately 4% of total imported machinery technology, for a value of roughly Euros 900 thousands in 2022.
Among the 12 Italian exhibitors the following ones are ACIMIT associated members: Biancalani, Bianco; Danitech, Ferraro, Lgl, Mei, Monti Antonio, Reggiani Macchine, Savio, Stalam and Tomsic.
Posted: November 13, 2023
Source:The Association of Italian Textile Machinery Manufacturers (ACIMIT)
ADLINGTON, UK — November 13, 2023 — Global workwear textile manufacturer, Carrington Textiles, received the Fabric & Fibre Innovation accolade at the Protective Clothing Industry Association Worldwide (PCIAW) Summit and Awards event held in Porto last week for its latest stretch military fabric development.
Hosted by the European Textile Services Association’s (ETSA) Secretary General, Elena Lai, the Fabric & Fibre Innovation Award was presented to Carrington Textiles’ Spartan HT Flex Lite. “A fabric that uniquely combines high-performance durability with exceptional comfort and flexibility. Developed specifically for military applications, Spartan HT Flex Lite provides the optimal balance between robustness and wearability that defence personnel require”, said Elena.
At a weight of 195gsm, Spartan HT Flex Lite is the only product from the Carrington Textiles’ Spartan military ripstop fabric family that incorporates 2% LYCRA® and 37% cotton in its composition for integrated stretch and outstanding wearer comfort. It also features 61% CORDURA® military grade high tenacity nylon 6.6 for strength and durability.
PCIAW event highlights
Carrington Textiles was the Premier Sponsor of this 3-day event, which started with a tour of a series of production facilities including Carrington Textiles’ Portuguese factory, MGC, where visitors learnt about the full manufacturing process and the sustainable technologies implemented at the site to produce the factory’s own steam with natural resources in a carbon neutral way.
Day 2 continued with a summit focusing on industry topics of interest. In his opening speech, Carrington Textiles’ Sales and Marketing Director and member of the PCIAW board, Paul Farrell, said: “It’s exciting for us to be a part of this wonderful event, the first to be held outside of the UK, in the city of Porto. As a founding member of the PCIAW, and Premier Sponsor, it brings me immense pleasure to see our collective vision come to life here in Portugal, which is a place close to our manufacturing heart. This is an important production location for our group, ensuring that we are close to our customers in mainland Europe.
Over the past years, PCIAW® has evolved into a formidable platform, offering its membership and businesses the tools and guidance to thrive. We have also been privileged to leverage this by expanding our own network and making connections both nationally and internationally”, Paul added.
Industry Insights
A series of insightful discussion panels focused on the industry’s burning topics also took place at the event. Carrington Textiles’ Business Strategy Analyst Louise Becart participated in a panel discussing the implications of EU Sustainability, where she explained: “There is currently an industry wide lack of understanding of these regulations. Fortunately, we have transparency throughout our supply chain and work with our customers to help them find the right solutions and provide them with the correct data for them to comply.”
In terms of sustainability, Louise explained that the company sees an increasing demand on sustainability credentials, including in public tenders for the defence sector. Additionally on the topic of microfibre pollution, she added: “We have been working to understand the causes of microfibre shedding. Whilst not conclusive, we found that there was a reduction in shedding by utilising different spinning methods. Data suggests that vortex spun fibres shed less than ring spun. We are now able to include CiCLO technology to polyester during the extrusion phase, so it biodegrades at a rate comparable to natural, cellulosic fibres. This is a strategy to mitigate the problem.”
Supporting future industry talent
Carrington Textiles was also a fabric sponsor of the event’s student design competition, PCA Vision, that took place on day 3 during the awards ceremony.
This year’s winner, Sophie Woodlife, from Manchester Metropolitan University, designed a striking high visibility workwear garment for airport groundcrew, coming in a variety of styles including hoodies and cargo shorts. In her design, Sophie chose Carrington Textiles waterproof fabric, Alaska Pro 2 due to its compliance with EN20471 standards, ideal for keeping air traffic control crew safe. Finalists Megan Dyson used Tomboy black, yellow and saffron colours for her New York Inspired corporatewear, while Connor Read incorporated a mix of the company’s Coolcel 200 Plus, Meridian and Astacon 180S fabrics to build his nature conservationist workwear.
The PCIAW Summit and Awards event and the accolade for Spartan HT Flex Lite, has not only highlighted Carrington Textiles’ pioneering role in fabric innovation and commitment to sustainable manufacturing, but also the company’s dedication to combining technological advancement with wearer comfort and durability.
MÖNCHENGLADBACH, Germany — November 13, 2023 — No two textile finishing line orders are ever the same for Monforts, which frequently develops bespoke solutions according to the specific needs of its individual customers.
However, all of the machine builder’s resourcefulness and engineering know-how were called upon to meet the complex and unusual specifications for a recent installation of a new Montex 8500 stenter line at Curt Bauer’s plant in Aue in Germany.
The new Montex 8500 line with a working width of 3.2 metres equipped with the MonforClean heat recovery and exhaust air purification system.
Tradition
Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.
“For bedding, the variety of patterns that can be created by jacquard machines allows very attractive designs with many subtleties to be created and there is no feeling to match sleeping on high quality damask bed linen,” says Gert Bauer, joint managing director of Curt Bauer together with his niece Claudia Bauer.
“For the home textiles sector we develop themed collections allowing various individual products to be combined in high quality, contemporary styles.”
Functional fabrics
The company’s technical textiles business produces functional fabrics that can minimise or completely eliminate the need for later assembly operations, such as fabrics with woven channels into which metal struts can be inserted. These are supplied to a wide number of automotive brands for the fabric cladding of camping van roofs, or cargo cover areas in cars. Another key application is in multi-layer insulating fabrics for the roller blinds of refrigerator counters in supermarkets.
Finishing
Curt Bauer’s finishing department is primarily focused on the special damasks for West African garments and is now unique in being able to meet the requirements of this market. Singeing, bleaching, mercerizing, piece dyeing, finishing and calendering – all possible in widths of up to 3.2 metres – are all central to the success of these special wovens. In addition, the company can dye polyester and fix it before carrying out any further high-level finishing required.
A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”
As a consequence, the company opted for a new Montex 8500 line with a working width of 3.2 metres equipped with the MonforClean heat recovery and exhaust air purification system. The Montex stenter remains unmatched in terms of its robustness and long service life and with MonforClean technology, the waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required, compared to full gas and thermal oil heating. Overall energy savings of up to 40% can now be achieved compared to conventional stenters.
Multi-level
The first challenge at the Aue plant was how to fit the significantly larger machine into the available space without restricting the area required for docking operations.
A challenge involved configuring the MonforClean system without having to make any costly changes to the roofing structure.
The special multi-level configuration that Monforts designers and Curt Bauer’s team devised in order to meet these requirements involved raising all of the line’s drying zones – with a combined length of over 28 metres – on scaffolding platforms, to enable the ground floor space below them to continue to be fully utilised.
The next challenge involved configuring the MonforClean system without having to make any costly changes to the roofing structure. This, Gert Bauer observes, demanded “millimetre precision”.
All of the line’s drying zones – with a combined length of over 28 metres – have been raised on platforms to meet space demands.
“The old stenter was dismantled and scrapped while production was ongoing, followed by the immediate installation of the foundations and the erection of the scaffolding for the dryer section,” he explains. “It was a challenging assembly operation, but we mastered it together.”
“We call the design of such customised machine layouts to fit into very confined spaces the shoehorn method,” adds Frank Breuer, technical project manager at Monforts. “It’s almost like playing Tetris.”
With the new line now fully operational, the savings it is providing have yet to be fully calculated.
“I can say that, as expected, the peak load is generally lower than both the stenter it has replaced and the Montex line we installed in 2003, especially in gas consumption,” Gert Bauer says. “The new configurations enabling better drainage of polyester fabrics through suction also help save energy. All in all, we are very satisfied with the new line and would like to thank Monforts very much for the good cooperation.”
COMO/VARESE, Italy — November 10, 2023 — MS Printing Solutions & JK Group Pigment Solution reduces CO2 emissions and water consumption in the entire process, it halves printing process steps with chemistry and perfectly manages and reproduces colour charts with an increase in colour yield.
What is this solution made up of?
Digistar Pigment 4K, JK Group newest and patent pending digital pigment ink. A new formula which doesn’t require pre- and post-treatment. It reduces digital printing process steps by 50%, water consumption by 100% and energy consumption noticeably*.
A completely reengineered JP7, a digital scanning printing machine designed to print pigment with the goal to radically reduce water and energy consumption thanks to newly integrated innovative Tech solutions, namely: Zero-Wastewater Recirculation System, Ink Recirculation, the Nozzle Shooting System and Easy- Clean, the new carriage plate.
A new dryer designed ad-hoc for this system. It dries and polymerises on the fly; guaranteeing perfect use conditions, the best achievable control and reduction of CO2 emissions during the entire process, thanks to the reduction of space needed for the manufacturing line in the plant.
System Plus Software, the new management software that integrates calibration, printing software and ink for a perfect colour management, assuring a colour yield up to 20% higher, while improving efficiency.
ITMA Asia is the place to find out more about our full range of inks. Our reactive formulas, which stand out for bright colors, excellent washing and rubbing fastnesses – all encapsulated in our eco-responsible BiB (Bag-in-Box), a flexible PE or multilayer plastic bag, sited inside a cardboard. Our disperse formulas, which boast high light fastness, high duration of outdoor exposure and high fastness to rubbing. Our dye-sub formulas, which assure astonishing and vibrant colors, detail accuracy, first-class image quality and unparalleled colour consistency and vibrancy.
ITMA Asia is also a chance to discover our digital printing machines for industrial textile printing. Lario, the first single- pass digital machine in the world; the unique Minilario, one of the world’s fastest scanning machine; the reliable JPK Evo, a high-end reliability industrial printing machine designed for long production runs.
ITMA Asia is where to meet the team. We are eager to meet customers and we are looking forward to answering to their questions concerning our products and the change of our organisational business model. Customers increasingly expect premium quality products and services. We aim to deliver a consistent and seamless experience to them.
* These data come from a study developed by Next Technology Tecnotessile Società Nazionale di Ricerca
LUBBOCK, TX — November 8, 2023 — In a groundbreaking partnership between the United States Army and First Line Technology, recent research findings are poised to usher in a revolutionary shift in decontamination processes. The research, now available to the public, highlights the potential of non-aqueous decontamination technologies, with a particular focus on FiberTect.
“FiberTect has been a powerful decontamination tool that is used globally as the ‘first’ item that a responder would grab to start the decontamination process,” notes Amit Kapoor, President of First Line Technology. “The result from continuous testing only reinforces the technical superiority of FiberTect over other common decontamination tools.”
FiberTect, the patented invention of Dr. Seshadri Ramkumar, a professor in the Department of Environmental Toxicology at Texas Tech University, was introduced in 2008. It is a three-layer, nonwoven wipe that boasts an activated carbon core sandwiched between absorbent top and bottom layers. These wipes are on the brink of transforming casualty decontamination, offering a safer and more efficient alternative to the prevailing water-based systems. FiberTect has been commercialized by First Line Technology in collaboration with Waco-based Hobbs Bonded Fibers.
Corey Collings, Director of R&D at First Line Technology, underlined the innovation, stating, “Decontamination of dry powders is a new use for FiberTect as it was originally designed for older Cold War-era liquid chemical warfare agents, but new research has shown that on powders its decontamination efficacy exceeds other technologies that have been traditionally used such as HEPA vacuums and adhesive tape.”
In today’s dynamic threat landscape, the continued evaluation of decontamination technologies has become imperative. While World War I primarily saw chemical warfare agents in gaseous or volatile liquid forms, they have evolved over time into persistent, adherent surface liquids. Traditional decontamination methods have proven inadequate for these modern-day challenges. Until the early 2010s, decontamination equipment was largely tailored to counter Cold War-era agents.
In contemporary scenarios, threats often manifest as dry powders, including synthetic opioids like Fentanyl, powdery toxic chemicals such as Russian Fourth-Generation Agents, and weaponized bio-toxins like ricin. These substances primarily pose inhalation hazards, but the use of improper decontamination techniques, such as isopropyl alcohol or high-pH soaps, can expedite skin permeation. Unlike liquid chemicals, these powders maintain their efficacy and persistence across various climates, from cold to hot. Water is effective for removal but poses challenges in cold weather and austere environments, and the runoff associated leads to cross-contamination and secondary hazards.
According to the U.S. Army’s latest findings, FiberTect wipes have demonstrated remarkable efficacy, delivering equivalent performance on both equipment and skin. What truly sets FiberTect apart is its safety for skin use, as it does not increase permeation or harm the stratum corneum, the skin’s outer protective layer. Furthermore, during full-scale operational assessments, a dry decontamination system incorporating FiberTect was found to be “as good as or better than the current water-based system.” These developments have the potential to enhance the safety and effectiveness of military and emergency response operations, with broader implications for public health and various industries.
Posted: November 9, 2023
Source: Jenna McAlister — Texas Tech University — College of Arts & Sciences
MADRID, Spain — November 8, 2023 — Valdese Weavers, a producer of decorative textiles in the United States for residential and contract markets, has partnered with global recycled cotton fiber producer, Recover™, to transform the home textile industry. The two innovative textile leaders, both at different stages of the supply chain, intend to capitalize on their combined expertise to drive the use of sustainable materials in the industry.
Valdese Weavers has more than 100 years of textile experience and works with a full range of furniture manufacturers, distributors, and retailers to deliver unparalleled design through their vertical manufacturing facilities. The company understands the importance of choosing responsible raw materials, and already offers a collection of environmentally conscious products. By partnering with Recover™, they can offer the highest quality decorative fabrics made with RCS/GRS verified Recover™ recycled fiber and help brands and retailers to reduce their environmental impact caused by virgin raw material production.
Blake Millinor, President and CEO of Valdese Weavers, commented: “We are proud to partner with Recover™ as a natural fiber platform for our customers searching for sustainable fabrics. Recover™ compliments our sustainable product offering by helping create a more circular material solution. We are excited to be working with the Recover™ team to tell this unique story and develop more responsible textile solutions for our customers”.
Recover™ has perfected the art and science of scaled production of recycled cotton fiber over more than 75 years, and today, the company is supported by leading institutional investors including STORY3 Capital, Goldman Sachs, Fortress Investment Group and Eldridge Industries. Its recycled cotton fiber is fundamentally transforming the textile industry, making significant environmental savings compared to virgin and organic cotton, and it is one of the most sought-after fibers in the recycled materials space. The integration of Recover™ fiber into Valdese Weaver’s product lines, enables the textile mill to remain frontrunners in delivering sustainable and innovative fabrics, and accelerate the production of low-impact products such as sofas, cushions, and curtains.
Alfredo Ferre, CEO at Recover™, commented: “The textile industry needs new solutions and collaborations across its supply chain, which is why we are excited to team up with Valdese Weavers and expand our product to the upholstery and home textile segment. Our expertise in producing low-impact, high-quality recycled fibers, will help achieve our shared goals in minimizing the impact on the natural resources we share.”
The first fabrics in the partnership made with Recover™ fiber will be on show at Valdese Weaver’s showroom in High Point, NC during the Interwoven market from November 14-16, 2023. For more information, interested parties are directed to contact communications@valdeseweavers.com.
KELHEIM, Germany — November 9, 2023 — Kelheim Fibres GmbH, leading manufacturer of specialty viscose fibres, and the Italian textile machinery manufacturer, Santoni Spa, were honoured with the ITMF International Cooperation Award 2023 during the ITMF Annual Conference in Keqiao, China.
ITMF Award Ceremony – From left to right: Mr. Ruizhi Sun, CNTAC President and former ITMF President; Patrick Silva Szatkowski, Santoni S.p.A., Betty Wu, Kelheim Fibres; Mr. Juan Parés, Textilsantanderina Spain, Jury Member and Vice President ITMF; Dr. Christian Schindler, ITMF Director General – Photo – ITMF
This prestigious recognition by the International Textile Manufacturers Federation (ITMF) acknowledges outstanding achievements in international collaboration within the textile industry in alignment with the values of the 17 Sustainable Development Goals (SDGs) of the 2030 Agenda for Sustainable Development.
Together, Kelheim Fibres and Santoni have developed an innovative and sustainable period panty, built upon advanced machine technology and high-performance viscose fibres. The result is a sustainable and high- performance underwear garment that seamlessly combines comfort and functionality.
Santoni’s specialized machinery enables a significant reduction in fabric waste, or even the potential for entirely waste-free production. Simultaneously, it enhances production efficiency, leading to cost savings. Kelheim Fibres’ wood-based specialty fibres, such as the trilobal Galaxy® and the hollow Bramante fibre, replace synthetic materials in the absorbent core of the menstrual underwear. They offer excellent performance and reliable protection for the wearer.
Natalie Wunder, Project Manager for New Business Development at Kelheim Fibres: “At Kelheim Fibres, we are dedicated to the open innovation approach. Collaborating with our partners across the value chain, we craft innovations that draw the best from all sources. This partnership not only consolidates expertise but also accelerates the entire innovation process. As a result, we ensure that our developments align with market needs and deliver sustainable solutions. With our project in collaboration with Santoni, we have achieved a new level in the domain of sustainable menstrual underwear. We take pride in the ITMF honouring our achievements with the International Cooperation Award, which serves as recognition of our work and inspiration for future collaborations.”
REMSCHEID, Germany / SHANGHAI, China — November 8, 2023 — Full service support for old CW and SW winders will end next year. Oerlikon Barmag Customer Service had already informed its customers about this in 2021. “At the end of a product life cycle, spare parts supply, software support, troubleshooting and other services are becoming increasingly difficult to provide. This leads to increased downtimes and thus to decreasing profitability of the system. It is not always possible or sensible to invest in a completely new system,” says Stefan Heesen, Head of Customer Service Products.
Full service support for old CW and SW winders ends in 2024. The new end-of-life replacement concept offers a pragmatic solution to make these systems fit for the challenges of the future.
Switching to WINGS technology, which has been established on the market for years, is not always easy for operators of spinning systems with CW and SW winders. In addition to building restrictions, processes certified by the end customer are often a stumbling block for yarn producers. Oerlikon Barmag has developed the new SW & CW end-of-life replacement concept for these system operators. Like the ACW-WINGS modernization package presented a few years ago, the pragmatic concept focuses on the utilization of state-of-the-art drafting and winder technology without significant investment costs.
Higher efficiency, better yarn quality and operational reliability at manageable costs
The ACW-WINGS modification solution has been implemented with great success customers in China and India since 2019 and exceeded all expectations with a return on investment (ROI) in just 4 to 5 months.
The concept not only provides for conversion to the highly efficient WINGS drawing fields. ACWW winders, mostly in 6- and 8-fold versions, with Siemens electrics are used as replacements. This solves the supply problems with spare parts instantly, fits into the existing building complexes and is compatible with existing automation systems. Certified POY/HOY processes in the 2500-6500 m/min range can also continue to be operated. The availability of the Siemens control components still used in series production guarantees operators worldwide long-term security. The equipment can also be repaired in the global Oerlikon Service Centers. The virtual connection of existing and new machines to the new IT environments, such as Atmos.io or Doffer & Plant Operation systems, is possible with this exchange package.
The list of benefits is long: extremely low-friction premium ceramic components in the yarn path ensure above-average yarn evenness. This in turn is particularly noticeable in improved dyeing properties. The ergonomic advantages typical for WINGS make the string-up process easier for the operator. The enclosed design of the encapsulated tangle units with their air suction and extraction units makes not only the process but also the ambient air significantly cleaner.
“With our new replacement package, we offer our customers operational reliability and spare parts availability at a manageable investment cost. We are confident that the end-of-life replacement concept will be just as successful as the ACW-WINGS concept,” says Stefan Heesen confidently. The ACW-WINGS modification solution has been running with great success at customers in China and India since 2019 and exceeded all expectations with a return on investment (ROI) in just 4 to 5 months. This was achieved primarily through 50% personnel savings due to the elimination of the separate drawing field level and energy savings of more than 40% thanks to more efficient tangle units and manual injectors. Significantly reduced string-up times lead to lower air consumption and reduced operating pressure, thus reducing the compressor capacity required. An improved yarn path with fewer contact points has reduced the number of yarn breaks and increased the full package rate by 10%.
GOTHENBURG, Sweden — November 8, 2023 — SKF has signed an agreement to acquire 2C Composites, a German high-performance fibre composite supplier. Through the acquisition, SKF will secure the supply of a leading and unique technology of composite layers which will strengthen the Group’s magnetic bearings offer.
2C Composites produces tubes, rotors, rolls and braided sleeves by braiding, cutting, and melting both carbon and ceramic fibres in self-developed machineries. The products are used in various applications, for example in the high-speed electric motor industry.
Frédéric Ponson, Director, SKF Magnetic Bearings, says: “This acquisition will help us to further grow and develop our magnetic bearings business. 2C Composites has developed a leading and unique technology of composite layers that, besides strengthening our magnetic bearings offer to existing customers, also has the potential to grow the business with additional promising revenue streams.”
Magnetic bearings are one of SKF’s technology growth areas. In 2022, the Group secured a record order intake for these products of over SEK 1 billion.
WASHINGTON — November 8, 2023 — With most imported holiday season merchandise already here, inbound cargo volume at the nation’s major container ports is expected to slow during the remainder of 2023, according to the Global Port Tracker report released today by the National Retail Federation and Hackett Associates.
“Retailers expect record-setting sales during the holiday sales season this year, and they have their shelves stocked to meet demand whether it’s in stores or at distribution centers to fulfill online orders,” NRF Vice President for Supply Chain and Customs Policy Jonathan Gold said. “Port, railroad and delivery service labor contract issues that caused worries earlier in the year are behind us, and the supply chain is running smoothly. Shoppers should have no trouble finding what they want this year.”
NRF is forecasting record holiday sales and growth between 3% and 4% over last year. That’s in line with pre-pandemic holiday growth rates. And the expected total of between $957.3 billion and $966.6 billion would easily top the record of $929.5 billion set last year.
Even as imports wind down for the year, Hackett Associates Founder Ben Hackett said economic conditions in the United States are better than Europe and Asia. A decline in consumer demand brought on by recessions in both regions has left shipping companies with excess capacity on new vessels built in response to the cargo surge of the past few years.
“U.S. consumers stand out in the global economy as they continue to benefit from job and wage growth and are still able to dip into savings accumulated during the pandemic,” Hackett said. “While U.S. consumers are doing well, a global recession in cargo trade could potentially affect the supply chain.”
U.S. ports covered by Global Port Tracker handled 2.03 million Twenty-Foot Equivalent Units in September, the latest month for which final numbers are available. That was down 0.2% from the same time last year but up 3.5% from August. It was the first time imports have reached the 2 million TEU mark since October 2022. And by topping August’s 1.96 million TEU, it became the busiest month of the year so far and should go down as the peak of the holiday shipping season.
Ports have not yet reported October numbers, but Global Port Tracker projected the month at 1.92 million TEU, down 4.2% year over year. November is forecast at 1.88 million TEU, a 5.8% increase from the same time last year that would be the first year-over-year gain since June 2022. December is forecast at 1.85 million TEU, up 6.8% year over year.
Those numbers would bring 2023 to 22.1 million TEU, down 13.5% from last year. Imports during 2022 totaled 25.5 million TEU, down 1.2% from the annual record of 25.8 million TEU set in 2021.
January 2024 is forecast at 1.87 million, TEU, up 3.7% year over year, while February – historically the slowest month of the year because of Lunar New Year factory shutdowns in Asia – is forecast at 1.72 million TEU, up 11.1% year over year. March is forecast at 1.73 million TEU, up 6.5% year over year.
Global Port Tracker, which is produced for NRF by Hackett Associates, provides historical data and forecasts for the U.S. ports of Los Angeles/Long Beach, Oakland, Seattle and Tacoma on the West Coast; New York/New Jersey, Port of Virginia, Charleston, Savannah, Port Everglades, Miami and Jacksonville on the East Coast, and Houston on the Gulf Coast. The report is free to NRF retail members, and subscription information is available at NRF.com/PortTracker. Subscription information for non-members can be found at www.globalporttracker.com.
As the leading authority and voice for the retail industry, NRF analyzes economic conditions affecting the industry through reports such as Global Port Tracker.
MILAN — November 13, 2023 — A delegation of 12 Italian textile machinery manufacturers will be on hand at the ITME Africa trade show, to be held in Nairobi (Kenya) from November 30th to December 2nd 2023. These Italian companies will be exhibiting at the Italian Pavilion, organized by ACIMIT, the Association of Italian Textile Machinery Manufacturers, and by the Italian Trade Agency.
