United States And Peru Negotiate Free Trade Agreement

The United States and Peru have entered into a free trade agreement (FTA) that includes a
yarn-forward textile and apparel provision that will require textile and apparel products to be
made from components manufactured in the participating countries. It does not contain any of the
cumulation or tariff preference levels that have been opposed by US textile manufacturers in some
of the other FTAs.

In 2005, the United States imported $821 million worth of textiles and apparel from Peru and
had exports worth $21 million.

The agreement is particularly important to farmers in both countries, but there also are
elements affecting industrial and consumer products. Upon implementation of the agreement, 80
percent of consumer and industrial products and more than two-thirds of current US farm exports to
Peru will immediately become duty-free.

US Trade Representative Robert Portman said the Peru agreement is part of the administrations
strategy to “advance prosperity within our hemisphere.” He expressed the hope that Colombia and
Ecuador would soon join the agreement. As a participant in the Andean Trade Preference Act, Peru
already has considerable duty-free access to the US market, but that act expires this year. As a
result, the United States initiated negotiations in May 2004 on a new Andean agreement with Peru,
Colombia and Ecuador; and Bolivia has participated as an observer.

April 18, 2006

GE Advanced Materials-Toshiba Joint Venture To Build Silicones Plant In China

GE Toshiba Silicones has entered into
an agreement to develop a new silicones manufacturing plant in Nantong, Jiangsu province, China.
The company — a joint venture between Wilton, Conn.-based General Electric Co.’s (GE’s) Advanced
Materials business and Japan-based Toshiba — will invest US$78 million to build the new plant. GE
Toshiba Silicones says the facility, scheduled to begin production by the end of 2007, will enable
it to provide silicone technologies to companies in China faster and more easily through a
shortened supply chain.

“GE Toshiba Silicones has always envisaged China as one of the most important markets in the
world,” said Eddy Wu, president and CEO, GE Toshiba Silicones. “We are committed to introducing the
latest silicone technologies to China based on profiles of local demands, aiming to convert
[research and development] results in advanced technologies into cutting-edge products that meet
the requirements of our customers.”

“The rich resources in world-class technologies and profound understanding of the market of
GE Toshiba Silicones will combine well with Nantong’s geographic advantage as an industrial center
in the [Yangtze River Delta] to provide a major driver to regional economic development,” added
Chen De Xin, director, Nantong Economic & Technology Development Zone.


April 11, 2006

Sole-Mate Tests Footwear For Hazardous Static Charge

Lakewood, N.J.-based Newson Gale Inc.
reports its Sole-Mate® tester determines whether workers are wearing nonconforming, nondissipative
footwear or gloves that can build up enough static charge to ignite dust clouds or solvent vapors
in hazardous areas.

The device, which typically would be installed at the entrance to a hazardous area, tests
the path of resistance from a floor plate, through the worker’s shoes and to the person’s finger,
and gives a pass or fail reading in seconds, according to the company. A shrill alarm and bright
light indicator will indicate whether the worker is wearing inappropriate shoes or gloves. One
version of the tester also features an integral doorway interlock that prevents access to a
hazardous area without a pass reading.

The Sole-Mate line includes models that connect directly to a 100-volt or 230-volt source.
The testers are dust- and water-tight, can measure footwear resistance according to U.S. and
European standards and are calibrated to National Measurement Accreditation Service standards,
Newson Gale reports. Also available is a calibration module that confirms the device’s
accuracy.


April 11, 2006

WestPoint Home Establishes Joint Venture With Indus

WestPoint Home, West Point, Ga., has established a joint venture with Pakistan-based Indus
Dyeing and Manufacturing Co. Ltd. The joint venture facility, known as Indus Home Ltd., will
produce towels in a newly expanded, vertical Indus plant outside Lahore, Pakistan. The plant
already is supplying goods to WestPoint and will increase its production over the next few months.
This joint venture is a vital step in restoring WestPoint Home as the industrys low-cost vendor and
advancing the company in the global market, said Joseph Pennacchio, CEO, WestPoint.

“For several years, WestPoint Home has purchased yarn from Indus Dyeing and Manufacturing, which
has proved itself in reliability and product quality, two key factors in our decision to select
Indus as a joint venture partner. Indus will produce WestPoint Homes full range of branded and
licensed label goods, as well as store brands made exclusively for WestPoint Home customers. Both
Indus and WestPoint are acknowledged textiles leaders, and our combined experience and expertise
will produce significant benefits and opportunities for future growth,” said Ifran Ahmed, director,
Indus.

April 11, 2006

Fong’s, Stork Prints To Form Joint Venture

Hong Kong-based Fong’s Industries Co.
Ltd. and The Netherlands-based Stork NV’s Stork Prints division have announced plans to form a
joint venture for the production, sales and service of rotary textile printing systems and
auxiliaries in Asia. The companies expect to reach final agreement on the deal within the next few
months.

“This alliance makes sense and will have a positive impact on the global markets,” said Dick
Joustra, president, Stork Prints. “The proven technology by Stork made to the high quality
standards of Fong’s is an attractive combination and will be beneficial for all our customers.”<
/font>


April 11, 2006

Congressional Leader Sees Downfall Of Trade Talks

One of Congress’ most influential international trade authorities believes the Doha Round of
trade liberalization negotiations is dead as a result of “irreconcilable differences” between the
United States and the European Union (EU) — an assessment, if accurate, that is bad news for both
textile manufacturers and importers.

Bill Thomas, R-Calif., chairman of the powerful House Ways and Means Committee and a
dedicated free trader, has urged the Bush administration to walk away from the worldwide trade
liberalization effort, and to concentrate instead on bilateral and regional trade pacts. While
everyone involved in the negotiations has conceded from the onset that they would be difficult,
textile and importer lobbyists in Washington and administration trade officials are not yet ready
to concede the talks will fail. However, Cass Johnson, president of the Washington-based National
Council of Textile Organizations (NCTO), told Textile World, “the Round is in trouble.”

Expressing his view that the EU is unlikely to alter its positions on trade, Thomas
concluded, “There comes a time when the United States simply must part ways with the EU.” He said
that despite objections from some quarters regarding bilateral agreements, they are “one of the few
tools remaining for the United States to gain access to the markets of other countries.” He urged
the administration to “reserve access” to the US market for those countries where it can be
determined that US manufacturers will benefit from greater market access. He added that bilateral
agreements could eventually lead to regional pacts.

Looking toward the November elections, Thomas, who has decided not to run for reelection,
expressed his concern that the anti-free trade factions will prevail.

A breakdown of the talks would present numerous problems for both textile manufacturers and
importers. Eric Autor, the Washington-based National Retail Federation’s vice-president and
international trade counsel, says importers have viewed the Doha Round as “the best opportunity”
for meaningful expansion and market growth — not only for textiles and apparel, but also for a
number of consumer products. Importers have been disappointed in the results of the various free
trade agreements the Bush administration has negotiated because of restrictive rules of origin.
Autor refuses to say the Doha Round is dead, but he admits a great deal of work needs to be done if
the 2006 year-end deadline is to be met.

While textile manufacturers have been concerned about the tariff reductions that inevitably
will result from the Doha Round, they are more concerned that a demise of the negotiations would
seriously jeopardize their highest priority issue — creation of a permanent safeguard mechanism to
help prevent China and perhaps one or two other Asian nations from completely taking over the US
market.

If the Doha Round breaks down at this point, NCTO’s Johnson believes there might be an
extension of deadlines or perhaps a less ambitious and less far-reaching new round of negotiations.
He hopes revised negotiations as well as those currently underway would include a textile and
apparel safeguard mechanism.

April 11, 2006


Ocanada Releases Coated Textile Line For Digital Printing

Toronto-based Océ-Canada Inc., an
operating company of The Netherlands-based Océ NV, has added a premium line of coated textiles for
digital display graphic printing to its range of wide- and super-wide-format solvent media suitable
for use with a variety of solvent ink-jet printers.

The textiles are available in a number of textures and weights, and most are processed with
DigiCoat to ensure optimal print quality while maintaining the texture and hand of the fabric,
according to Océ. A special prepping process is used to treat some fabrics to enable excellent
print quality without coating, the company reports. Benefits of the fabrics include ease of
handling, no reflection, light weight and flexibility.


April 4, 2006

Martex Creates Eco-Wipers Division

Martex Fiber Southern Corp., a Spartanburg-based textile company specializing in textile
recycling and textile waste removal, has launched a new division, Eco-Wipers, to offer wiping
cloths made from preconsumer cloth waste reclaimed from apparel manufacturing operations. The
product line will include new colored, bleached and unbleached flat and fleeced knit wipers for
such end-users as food-service, janitorial and paint companies, as well as for the general public
through major retail outlets.

“We are aggressively seeking new customers,” said Jerry Satterfield, newly hired as vice
president of sales for Eco-Wipers. “I am confident that a strong market exists for our high-quality
products. Our commitment to providing an environmentally responsible product will also be a way to
reach customers who want to make purchasing decisions that add to the sustainability of our
planet.”

April 4, 2006

Two More Nations Join Central American Trade Pact

Two additional nations — Honduras and
Nicaragua — have officially joined the Dominican Republic-Central American Free Trade Agreement
(DR-CAFTA) in a move that should please both US textile manufacturers and importers.

Although DR-CAFTA was negotiated in 2004, the six Central American participants have been
slow in getting their respective governments to take the steps necessary to implement the
agreement. El Salvador was the first to come on board this past March, but still awaiting action by
their governments are Costa Rica, the Dominican Republic and Guatemala. Once the pact is fully
implemented, participants will enjoy duty-free access to US textile and apparel markets, providing
they use inputs made in one of the participating countries.

Saying the US government has worked “closely and intensively” with the participating
countries, US Trade Representative Rob Portman promised, “We will continue to work with the
remaining three DR-CAFTA partners to ensure timely and full implementation of the agreement.” That
could not happen too soon for US textile and apparel manufacturers and importers who see increased
trade with the Central American countries as an alternative to trade dominated by China and other
Asian nations.



April 4, 2006

Swift Galey Sells Denim Spinning Operation To Frontier

Atlanta-based apparel, home and hospitality textile manufacturer Swift Galey has sold its denim
spinning operation in Columbus, Ga., to Sanford, N.C.-based Frontier Spinning Mills Inc. Under the
terms of the transaction, the Columbus plant will continue to operate until mid- to late May 2006,
after which Frontier will relocate the machinery to plants in North Carolina, where it will spin
yarn to sell for Swift Galey’s denim fabrics. Approximately 200 employees will be affected by the
closing of the Columbus facility.

According to John J. Heldrich,
president and CEO, Swift Galey, the Columbus spinning facility is outdated and inefficient. He said
the company will continue to operate a large, relatively modern weaving/dyeing/finishing plant in
Columbus.

“The spinning facility is not cost-efficient by today’s standards, so we have formed a
partnership with Frontier, which has state-of-the-art, modern facilities. Henceforth, we will
purchase yarn from Frontier because that is more cost-efficient for us,” Heldrich said, adding: “We
are an innovator of product and have to stay competitive. This action will help provide for the
future longevity of the company.”

Heldrich said some manufacturing and administrative personnel currently at the older plant
will be able to transfer to the other Columbus facility.

Swift Galey still operates a spinning plant near Charlotte, where it spins yarn for its
khaki fabrics. In addition to operations in Georgia and the Carolinas, it maintains either directly
or through joint ventures manufacturing facilities in Canada, Mexico, China, Africa and the
Philippines. Its newest offshore ventures include the purchase of the majority interest in the
Mexico-based House of Lajat, which manufactures cotton and polyester/cotton textiles for
hospitality, sheeting and uniform applications; and two joint ventures in China with Lucky Textile
Group — one to build a denim-manufacturing plant, and one to operate Lucky’s existing dyeing and
finishing facility.

April 4, 2006

Sponsors