YKK Center Park Furusato-No-Mori Initiative Uses Technology To Visualize Carbon Dioxide Absorption

TOKYO — February 3, 2021— YKK Corp. has launched an experimental trial to visualize carbon dioxide absorption using “e-kakashi,” an AI-powered brain for agriculture provided by SoftBank Corp. that includes a carbon dioxide absorption estimation system. The trial is taking place at YKK Center Park’s Furusato-no-Mori (Hometown Forest) on the grounds of the Kurobe Manufacturing Center.

The YKK Group has established the “YKK Group Environmental Vision 2050” and the “YKK Sustainability Vision 2050,” and undertakes business activities to achieve the goals set out in those visions. Furusato-no-Mori was initially created to realize YKK founder Tadao Yoshida’s ideal of a factory in a forest, but the forest is also helping to reduce greenhouse gases, one of the goals of YKK’s two visions. YKK collected the seeds of trees that are native to Kurobe and systematically planted 20,000 seedlings representing 20 species. Today, the company continues to observe the forest and its changing state with tree height measurements, biological surveys, and other means. In the biological survey of 2019, 10 years after the seedlings were planted, YKK observed biological diversity and recorded 318 different species, 26 of which are considered endangered in Japan or Toyama Prefecture. YKK partners with local organizations to hold events such as observation meetings of the forest and its insect life and makes the forest a venue for environmental education for children.

In this latest project, YKK launched an experimental trial supported by SoftBank to visualize the carbon reduction effectiveness of green areas of YKK Center Park, including Furusato-no-Mori. The trial is scheduled to run from November 2020 to the end of March 2021 and will use an installed “e-kakashi” system. Local meteorological data and environmental data such as ground temperatures that are collected by the “e-kakashi” sensors are combined to visualize CO2 absorption rates in real time. This information is then displayed on signs in the café and lounge area of YKK’s Maruyane Exhibition Hall.

The YKK Group conducts business activities in 72 countries and regions around the world and at each location it promotes greening projects such as tree plantings in cooperation with local communities. Not only will the data from this trial be used in environmental learning programs and to promote understanding of the mechanism of CO2 absorption in green spaces, it will also be used in YKK’s greening activities around the world.

Posted: February 3, 2021

Source: YKK Corp.

INDA Webinar Series To Address Global Nonwovens Issues: Upcoming Facemask Standards, Single Use Plastics Legislation, And Impacts Of Recent Capacity Announcement

CARY, N.C. — February 2, 2021— INDA, the Association of the Nonwovens Fabrics Industry, is taking the lead to inform the nonwovens/engineered materials industry with three one-hour webinars on the toughest issues facing the North American Nonwovens Industry. These critical issues include: facemask performance standards, single use plastics (SUP) legislative policy issues, and industry impacts from recent capacity announcements in Spunbond/Spunmelt/”Spunlace” caused by COVID-19 demand for wipes, medical gowns, and facemask materials.

The one-hour webinars will be held at 11 a.m. EDT on March 16, 25, and April 6, and include subject matter experts in facemask standards, plastics legislation, and nonwoven supply/demand analysis. Topics include:

The New ASTM Performance Standard for General Public Facemasks and Resultant Design/Product Opportunities

Tuesday, March 16, 11 a.m. EDT

Presenters: Dave Rousse, president, INDA; and Jeff Stull, president, International Personnel Protection Inc.

To conserve meltblown fiber for the healthcare sector while using other nonwoven media to provide protection to the general public, INDA worked with the National Institute for Occupational Safety and Health (NIOSH), and the American Society for Testing and Materials (ASTM) to develop a performance standard for general public facemasks.  Jeff Stull, Consultant to NIOSH and steward of the ASTM process, will discuss the purpose and development of the upcoming Standard, its two performance levels, and test methods.  Dave Rousse, President of INDA, will discuss design opportunities created for makers of facemask filter media and facemask designers.

Plastics Concerns and the Nonwovens Industry

Thursday, March 25th, 11 am EDT

Presenters:  Dave Rousse, president, INDA; Jessica Franken, director of Government Affairs, INDA; and Tom Carlyle, Nonwovens Commercial manager-Americas, Lenzing AG

Legislative initiatives on Single Use Plastics introduced in California, Canada and the U.S. Congress will be harmful to nonwovens, especially those that use viscose.  All businesses involved in nonwovens should know of these impending impacts on nonwoven products and the unintended consequences to their business.  Jessica Franken will review the current legislative status in states, Congress and Canada and INDA’s engagement with other plastic industry associations to address the challenges of the European Union’s approach should it be incorporated in North America.  Tom Carlyle of Lenzing will discuss the viscose/lyocell supply and interchangeability realities.

Spunbond/Spunmelt/”Spunlace” Capacity/Demand Scenarios Prompted by COVID-19

Tuesday, April 6, 11 a.m. EDT

Presenters: Brad Kalil, director of Market Intelligence and Economic Insights; INDA, and Dave Rousse, president, INDA

The COVID-19 pandemic and the U.S. federal government response to it has quickly upped the North American footprint for meltblown production. Tightness now is being seen in Spunbond/Spunmelt and in the hydroentangled wipes substrate often called “Spunlace.” Several new capacity announcements have been made in nonwovens.

INDA’s Brad Kalil had been tracking developments in these sectors and will present the 2021 North American Supply Report data and analysis with his insights on developments caused by the pandemic response in wipes, medical gowns, and facemask material supply sectors.

“The COVID-19 Pandemic has generated many challenges to the Nonwovens Industry in North America and around the world,” said Dave Rousse, INDA President. “INDA has been active in tracking, leading and advocating on several relevant policy issues enabling our members to run their businesses with confidence that INDA is on alert, looking around corners, and positioned to inform and lead in supporting our members’ ability to conduct business with the facts they need and  unimpeded by policy development challenges. These webinars deliver on those points.”

Each webinar is $99 for a single INDA Member, $250 for up to eight INDA Members from the same company, and $500 for up to 15 INDA Members from the same company. Non-member fees for the three categories are $130, $325, and $650 respectively. There is a 15-percent discount for members and non-members purchasing all three webinars at one time. Visit www.inda.org/inda-webinars to learn more.

Posted: February 2, 2021

Source: INDA, the Association of the Nonwovens Fabrics Industry

SanMar And WonderWink® Partner To Offer Healthcare Apparel

ISSAQUAH, Wash. — February 2, 2021— SanMar Corp., a supplier of wholesale accessories and apparel, today announced a new partnership with WonderWink® to offer world-class healthcare scrubs as part of SanMar’s expansive product offering. The partnership marks SanMar’s entrance into the healthcare apparel space, combining the company’s extensive distribution network and industry expertise with WonderWink innovative design, product quality and fashionable styling.

Since 1971, SanMar has championed apparel that unites people and builds up teams, groups and communities. With a passion for corporate responsibility and investing in the social good, the family-owned company’s new position in healthcare apparel is an exciting opportunity to pair its values with a dynamic product line.

“We’re thrilled to join forces with WonderWink and supply wholesale healthcare apparel to professionals on the frontlines of the pandemic,” said Jeremy Lott, president of SanMar. “This partnership connects the high quality and comfort of WonderWink scrubs with our unparalleled distribution network. SanMar is proud that we can make a difference, in our own way, for our essential healthcare workers during this critical time.”

With the enormous challenges healthcare workers face during the COVID-19 crisis, the need for quality, reliable apparel is a key priority within the medical industry. The retail line of WonderWink scrubs is crafted to provide comfort and style while meeting all functional standards so caregivers can have confidence when treating patients. Designed with healthcare workers in mind, the scrubs include convenient features like breathable fabrics, multiple pockets, pen holders and badge loops.

“We are proud to partner with SanMar to bring WonderWink, the originator of fit and fashion in scrubs, to a new audience of healthcare professionals,” said Peter Benstock, president of Superior Uniform Group Healthcare, a division of Superior Group of Companies™. “We’ve been providing innovative apparel to healthcare heroes for over a century, so this partnership is a natural next step to continue that story of support and reliability.”

“For nearly 50 years, SanMar has seen our employees and suppliers as part of our family,” said Lott. “We look forward to including WonderWink as the newest addition — and to do good for our frontline workers while we’re at it.”

The SanMar and WonderWink collaboration will be available April 2021 on sanmar.com.

Posted: February 2, 2021

Source: SanMar Corporation

Competence Center For E-Warp Knitted Fabrics In North America

OBERTSHAUSEN, Germany — January 29, 2021 — KARL MAYER offers trendsetting solutions and impulses for the textile industry and, to this end, looks beyond the company’s usual purview. In particular, connecting the textile industry with new technologies offers diverse potential for innovations. To tap into this potential, KARL MAYER has developed its TEXTILE MAKERSPACE. The platform is intended to encourage exchange and offer interested parties the opportunity to test new technologies for their project. Among other things, the focus of TEXTILE CIRCUIT is on the promising topics of smart textiles and wearables. Innovators from various fields are investigating the possibilities offered by string bar technology to incorporate electrically conductive yarns directly on the machine. Initial results include comfortable arm cuffs for controlling robots, textile charging stations for inductively charging smartphones and a T-shirt that measures vital functions. Further projects with field-based partners are underway at the headquarters in Obertshausen.

Since the end of 2020, customers can now also develop and implement ideas for e-textiles at KARL MAYER North America. A modified standard machine and competent service technicians are available for this purpose in Greensboro. Textile Technology Product Developer Sophia Krinner, who was in charge of setting up TEXTILE CIRCUIT, also provides support from head office. The most recent IDTechEx in November 2019 also encouraged the expansion of the MAKERSPACE area through capacity in Greensboro.

At the event focusing on new technology, KARL MAYER successfully presented itself as a competent partner in the production of e-textiles and answered numerous specific project inquiries from innovative partners based in the USA. Sophia Krinner is looking forward to a variety of projects and challenges. “Customers can come to us with their ideas and work with us to try out different ways to make their ideas a reality.”

If you would like to know more about TEXTILE CIRCUIT, you can find out more at www.textile-makerspace.com.

February 2, 2021

Source: Karl Mayer

 

Bluesign Completes 2020 Revision Of All Its Chemical Substances Lists

ST.GALLEN, Switzerland  — January 29, 2021 — Coming into effect on Jan 29th, 2021, the revision incorporates new scientific knowledge on the toxicological and ecological profile of substances, new legal classification of chemical substances, new legal consumer safety limits, revised risk assessments based on the bluesign® CRITERA for chemical assessment, feedback from experts of the Chemical Experts Group (CEG) as well as new analytical standards.

The revision covers all the updates to the restrictions for chemical substances published in:

  • BSSL (Bluesign® SYSTEM SUBSTANCES LIST)
  • BSBL (Bluesign® SYSTEM BLACK LIMITS)
  • Bluesign® RSL

The Bluesign® SYSTEM SUBSTANCES LIST (BSSL) specifies limits for chemical substances in articles (consumer safety limits).

The Bluesign® SYSTEM BLACK LIMITS (BSBL) specifies threshold limits for chemical substances in finished chemical products such as auxiliaries or dyes. The compilation of substances in the BSBL includes all substances for which a precautionary hazard-based threshold limit is defined.

The Bluesign® RSL is an extract of the BSSL and contains consumer safety limits and recommended testing methods for the most important and legally restricted substances in textile and leather articles and accessories.

With the 2020 update, the structural concept regarding BSSL which defines consumer safety limits and BSBL are improved. Substance groups that are not relevant for consumer safety but had been listed in the past for a more comprehensive substances list are no longer included in the BSSL. They are now regulated by BSBL (e.g. fluorinated greenhouse gases).

Bluesign has recently developed a new tool called bluesign® SUBSTANCE NAVIGATOR which was used for the 2020 revisions of all chemical substances lists. “We are pleased to announce that 2020 revisions of BSSL, BSBL and bluesign® RSL are now complete. The lists are generated for the first time from a new substance database, the bluesign® SUBSTANCE NAVIGATOR. This brand new database is still under development and we will be announcing the launch of this powerful tool in the near future” said Hartwig Tews, bluesign Head of Technical Product Development.

Beside some layout changes, with the 2020 revisions bluesign also introduces the following innovations:

New term: Sector of Use

A new term used in the revised documents is the “Sector of Use”. This is part of an innovative concept for the assessment of chemical products, where Bluesign uses an approach similar to REACH. This allows a product, process and industry specific assessment of risks to human and the environment, that can be adapted to all kinds of industries. Typical sectors of use are for example manufacture of textile products or manufacture of rubber products.

Substance groups:

The annexes of the new BSSL and BSBL contain much more substances than before. The reason is that many entries in BSSL and BSBL refer to a substance group and not to individual substances. With the IT data base which refers as strict as possible to clearly defined CAS numbers much more chemical substances are included and as a result much more hits to substance groups can be assigned now. Finally, BSBL and BSSL have now a higher degree of completeness regarding the regulated substance groups.

All revised documents including changelogs are public and can be found as a download file on bluesign corporate website.

Posted: February 2, 2021

Source: bluesign technologies ag

INDA, Industry And Union Coalition Outlines Policy Recommendations In Letters To President Biden, Congressional Leaders

CARY, N.C. — January 29, 2021 — INDA, the Association of the Nonwoven Fabrics Industry, with a broad coalition of industry organizations and labor unions, representing a broad spectrum of manufacturers and workers who stepped up to make essential PPE and other products throughout COVID-19, sent a letter today to President Biden and congressional leaders outlining recommendations on specific policy initiatives that must be adopted to re-establish a permanent PPE industry in the United States.

As noted in their joint letter sent (Find links to the full letters below):

“The heroic efforts of the U.S. textile industry and its exemplary workforce throughout this crisis clearly demonstrate that domestic industry has the technical capabilities and existing capacity to make the United States self-sufficient in terms of our national PPE needs. However, the permanence of this self-sufficiency is dependent on the development of government policies designed to help domestic manufacturers survive the current economic crisis and incentivize the long-term investment needed to bring PPE production back onshore. If appropriate policies are not implemented, the valuable and substantial progress made over the past year to onshore a vibrant PPE industry will evaporate in the face of China’s global manufacturing dominance in the PPE sector.

However, the permanence of this self-sufficiency is dependent on the development of government policies designed to help domestic manufacturers survive the current economic crisis and incentivize the long-term investment needed to bring PPE production back onshore.”

The associations are requesting that President Biden and Congress adopt the policy recommendations outlined in the letter through legislation, executive order and other appropriate means.

The coalition sent a letter to President Biden and a second letter to Senate Majority Leader Charles Schumer (D-NY), Senate Minority Leader Mitch McConnell (R-KY) and Speaker of the House Nancy Pelosi (D-CA) and House Minority Leader Kevin McCarthy (R-CA) outlining these requests.

Industry Labor Letter COVID Relief to Congress

Industry Labor Letter COVID Relief to President Biden

“Our members and our industry need these federal imperatives in place to ensure domestic readiness for the next pandemic,” said Dave Rousse, INDA President.

Posted February 2, 2021

Source: INDA

Converting Equipment Manufacturer Introduces WasteTech ACE For Non-Stop, Automated Label And Trim Waste Removal

NEWARK, Del. — February 1, 2021 — Waste handling equipment manufacturer Lundberg Tech, Newark, Del., has introduced the WasteTech Automated Cleaning Efficiency (ACE) trim and label waste removal system. Based on the company’s signature WasteTech All-In-One trim removal system, the WasteTech ACE automatically captures edge trim, label matrix, die cuts, and other waste materials at the machine along with any dust generated, cuts it into confetti, collects it in a bulk bag for recycling or disposal, and cleans the airstream through a built-in filter. The self-cleaning filter system continuously removes any dust and other particulates from the pneumatic conveying airstream to eliminate the line stoppages often required to clear waste from other trim systems, and promote efficient, non-stop operation.

Developed for converters, label manufacturers, printers, textile manufacturers and others concerned with sanitary and/or automated production, the self-contained WasteTech ACE vacuum waste handling system excels at managing materials with a high degree of dust and fibers such as paper, fiberglass, foil, textiles, PET, and fiber-reinforced tapes. The proprietary, pre-engineered trim system integrates the Automatic Cleaning Efficiency filter with inlet tubes, pneumatic conveyor piping, granulator with silencer, ventilator with silencer, cyclone separator, and bag holder, plus a protective cabinet. A single unit may manage dust and waste from up to three different slitters, presses, die cutters, and other converting machines simultaneously.

Posted February 2, 2021

Source: Lundberg Tech

VDMA: Webtalk On Material Efficiency And Recycling For The Manmade Fiber Industry

FRANKFURT — February 2, 2021 — The next VDMA technology webtalk is scheduled for February 9, 2021, from 2 to 4 p.m. CET. The focus will be on “Material efficiency & recycling technologies for the manmade fiber industry”.

The presenters and their topics at a glance:

Manfred Dobersberger, PureLoop and Wolfgang Hermann, EREMA Engineering Recycling Maschinen und Anlagen will present an integrated shredder extrusion technology for fibrous, textiles scraps, multilayers, films, trays, straps, foam, trays but also polymer mix materials from textiles and even classical thermoplastic composite materials.

Axel Hannemann, company Gneuss, offers recycling solutions which enable the fibre manufacturer to use their otherwise worthless fibre waste to substitute virgin material in the manufacture of high-quality fibres.

Markus Reichwein, Oerlikon Manmade Fibers: “We at Oerlikon Manmade Fibers describe a cascaded approach into new technologies as well as different material sources outlining your need for versatile solutions.”

After the presentations, the experts will be available to answer the participants’ questions.

Registration is possible via this link (no participation fee):

https://register.gotowebinar.com/register/2895642349810386704

Posted: February 2, 2021

Source: VDMA

The 20 Countries That Will Do Business At Colombiatex de las Américas 2021 Digital Edition

BOGOTA, Colombia — January 15, 2021 — The United States, Ecuador and Costa Rica lead the group of more than 190 international companies invited by ProColombia that will be doing business, through virtual platforms, with the exhibitors registered in the event organized by Inexmoda.
From America to Europe, 193 international buyers from 20 countries, will hold virtual business appointments with the Colombian offer, between January 18 and February 5. The international delegation is led to a greater extent by the United States, Ecuador, Costa Rica, Mexico, Puerto Rico and Guatemala. From Europe there will be buyers from Germany, Spain, Portugal, France, among other destinations.
“Fashion exports had a slight rebound in November 2020, according to the National Administrative Department of Statistics Dane, We hope that this momentum will continue and that events such as Colombiatex from Inexmoda will help us boost international fashion sales, which have raised the Colombian flag thanks to their quality, designs, delivery times, flexibility in production volumes and sustainability. Likewise, virtuality continues to be our main ally, so we hope that this edition will bring us good results,” said Flavia Santoro, president of ProColombia.
The official also highlighted the corporate heroism that the fashion sector in Colombia had in 2020 to innovate and adapt to circumstances, with protective clothing and smart fabrics, to meet international demand.
Among the categories that international buyers will be looking for the most in virtual appointments, are textile fibers, technical textiles and a complete package of casual clothing, formal wear, jeanswear, underwear and swimwear, mainly. Likewise, there will be the presence of VIP buyers such as Super Éxito, Almacenes De Prati, Etafashion, Marathon Sports, El Éxito Betancur, among others.
Similarly, ProColombia will carry out commercial agendas with about 12 buyer companies from The United States, Ecuador, Mexico and Guatemala, who will come to see the facilities of companies in the fashion sector in Colombia.
It is worth noting that, between January and November 2020, fashion exports reached US $ 605 million, according to figures from Dane with analysis from ProColombia. The main purchasing countries were the United States, Ecuador, Mexico, Peru, Costa Rica, Brazil and Chile. While the garments most in demand abroad were fabrics and fabrics, girdles and control clothing, jeans, women’s underwear and leather manufacturers.
Posted February 2, 2020

Source: ProColombia

 

Filson Successfully Adapts To New Normal Thanks To Gerber Technology’s YuniquePLM

NEW YORK CITY — February 2, 2021 — Established in 1897 — Filson is an outfitter and manufacturer of unfailing goods for outdoor enthusiasts and has been the “gold standard” for tough, comfortable outdoor clothing prized by hunters, anglers, engineers, explorers, miners and anyone who has a passion for the outdoors. As Filson strives to offer the level of service C.C. Filson would expect, it leveraged Gerber Technology’s cloud-based product lifecycle management (PLM) system, YuniquePLM®, to ensure a smooth, digital process that will promote team collaboration and empower them to offer the highest quality products, whether they are in the office or working remotely.

“When we were looking to implement a PLM solution, the head of IT said YuniquePLM was the Cadillac of PLM systems. It’s the best solution on the market,” said June Evans, Director of Technical Design at Filson. “We ultimately chose YuniquePLM because of how easy it is to use and the integration with AccuMark®. YuniquePLM is an incredible asset and has helped tremendously over the last several months as we all adjusted to working remotely.”

When COVID-19 caused a vast majority of companies to work from home, Filson was ready for the challenge. Four years ago, Filson digitally transformed their development process by integrating YuniquePLM into their workflow. When it was time to pack up the office and transition to remote working, Filson was able to do so without any issues and in no time.

Prior to YuniquePLM, Filson was using excel for tech packs and other manual processes which were time consuming and inefficient. All of their information was stored on a local server which made collaboration and product development difficult as they had to ensure data was updated in multiple places. Through seamless integration with AccuMark, Gerber’s CAD pattern design software, YuniquePLM enabled Filson to streamline the entire design and development process while improving collaboration, minimizing errors, and allowing them to easily transition to remote work.

“YuniquePLM is a necessity in uncertain times like these,” said Clayton Parker, Director of PLM Product Management at Gerber Technology. “Our solution is incredibly easy to use and enables our customers to get up and running as quickly as possible. When COVID-19 caused many companies to temporarily shut down, a majority of our customers were still able to be productive because they leveraged YuniquePLM.”

Filson leveraged one-on-one sessions with the Gerber Consulting team to fully implement YuniquePLM in just a few weeks. In addition to their product development team, several other departments, including sales, marketing, customer service, and engineering, are leveraging YuniquePLM to gain access to helpful product data and information. Filson is able to onboard new users into YuniquePLM in as little as half an hour.

Posted: February 2, 2021

Source: Gerber Technology

1...954955956...2,677Page 955 of 2,677

Sponsors

Breaking News

Load more

Digital Issue

2026 Quarterly Issue III

View Latest Digital Issue

FEATURED ARTICLES

© Copyright 2026 Textile Industries Media Group, LLC.