TEMPE, Ariz. — December 1, 2022 — Economic activity in the manufacturing sector contracted in November for the first time since May 2020 after 29 consecutive months of growth, say the nation’s supply executives in the latest Manufacturing ISM® Report On Business®.

The report was issued today by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Management® (ISM) Manufacturing Business Survey Committee:

“The November Manufacturing PMI® registered 49 percent, 1.2 percentage points lower than the 50.2 percent recorded in October. Regarding the overall economy, this figure indicates expansion for the 30th month in a row after contraction in April and May 2020. The Manufacturing PMI figure is the lowest since May 2020, when it registered 43.5 percent. The New Orders Index remained in contraction territory at 47.2 percent, 2 percentage points lower than the 49.2 percent recorded in October. The Production Index reading of 51.5 percent is a 0.8-percentage point decrease compared to October’s figure of 52.3 percent. The Prices Index registered 43 percent, down 3.6 percentage points compared to the October figure of 46.6 percent; this is the index’s lowest reading since May 2020 (40.8 percent). The Backlog of Orders Index registered 40 percent, 5.3 percentage points lower than the October reading of 45.3 percent. The Employment Index returned to contraction territory (48.4 percent, down 1.6 percentage points) after being unchanged in October at 50 percent. The Supplier Deliveries Index reading of 47.2 percent is 0.4 percentage point higher than the October figure of 46.8 percent. Except for last month, the Supplier Deliveries Index hasn’t been at this level since February 2012 (47 percent). The Inventories Index registered 50.9 percent, 1.6 percentage points lower than the October reading of 52.5 percent. The New Export Orders Index reading of 48.4 percent is up 1.9 percentage points compared to October’s figure of 46.5 percent. The Imports Index dropped into contraction territory at 46.6 percent, 4.2 percentage points below the October reading of 50.8 percent.”

Fiore continues, “The U.S. manufacturing sector dipped into contraction, with the Manufacturing PMI at its lowest level since the coronavirus pandemic recovery began. With Business Survey Committee panelists reporting softening new order rates over the previous six months, the November composite index reading reflects companies’ preparing for future lower output. Demand eased, with the (1) New Orders Index remaining in contraction territory, (2) New Export Orders Index below 50 percent for a fourth consecutive month, (3) Customers’ Inventories Index effectively in ‘just right’ territory, climbing 7.1 percentage points, and (4) Backlog of Orders Index moving deeper into contraction. Output/Consumption (measured by the Production and Employment indexes) declined month over month, with a combined negative 2.4-percentage point impact on the Manufacturing PMI calculation. The Employment Index moved back into contraction, and the Production Index decreased but still remained in modest growth territory. Panelists’ companies confirm that they are continuing to manage head counts through a combination of hiring freezes, employee attrition, and now layoffs. Inputs — defined as supplier deliveries, inventories, prices and imports — mostly accommodated future demand growth. The Supplier Deliveries Index indicated faster deliveries, and the Inventories Index expanded at a slower rate as panelists’ companies continued to manage the total supply chain inventory. The Prices Index decreased for the ninth consecutive month, falling deeper into contraction territory.

“Of the six biggest manufacturing industries, two — Petroleum & Coal Products; and Transportation Equipment — registered weak-to-moderate growth in November.

“Manufacturing contracted in November after expanding for 29 straight months. Panelists’ companies continue to judiciously manage hiring, other than October 2022, the month-over-month supplier delivery performance was the best since February 2012 when it registered 47 percent, and material lead times declined approximately 9 percent from the prior month, approximately 18 percent over the last four months. Managing head counts and total supply chain inventories remain primary goals. Order backlogs, prices and now lead times are declining rapidly, which should bring buyers and sellers back to the table to refill order books based on 2023 business plans.”

Six manufacturing industries reported growth in November, in the following order: Apparel, Leather & Allied Products; Nonmetallic Mineral Products; Primary Metals; Miscellaneous Manufacturing; Petroleum & Coal Products; and Transportation Equipment. The 12 industries reporting contraction in November, in the following order, are: Printing & Related Support Activities; Wood Products; Paper Products; Textile Mills; Fabricated Metal Products; Furniture & Related Products; Chemical Products; Plastics & Rubber Products; Computer & Electronic Products; Food, Beverage & Tobacco Products; Machinery; and Electrical Equipment, Appliances & Components.

What Respondents Are Saying

“Customer demand is softening, yet suppliers are maintaining high prices and record profits. Pushing for cost reductions based on market evidence has been surprisingly successful.” [Computer & Electronic Products]

“Future volumes are on a downward trend for the next 60 days.” [Chemical Products]

“Orders for transportation equipment remain strong. Supply chain issues persist, with minimal direct effect on output.” [Transportation Equipment]

“Consumer goods are slowing down in several of our markets, although the U.S. economy seems decent. Cannot say the same for the European economy.” [Food, Beverage & Tobacco Products]

“General economic uncertainty has created a slowdown in orders as we approach the end of the year, and many of our key customers are reducing their capital expenditures spend.” [Machinery]

“Overall, things are worsening. Housing starts are down. We’re doing well against our competitors, but the industry overall is down. We’re sitting on cash (that is) tied up in inventory.” [Electrical Equipment, Appliances & Components]

“The market remains consistent: sales match expectations; there are concerns about the impact of rising interest rates on customers; most suppliers have recovered on labor, but some are still struggling; and inflation seems to have peaked, but commodity price decreases have not been passed through to us. Lots of unknowns regarding impact to the European Union from the Russia-Ukraine war and questions about customer behavior in 2023.” [Miscellaneous Manufacturing]

“There is caution going into 2023, but the commercial section of construction seems to still be going strong.” [Nonmetallic Mineral Products]

“Looking into December and the first quarter of 2023, business is softening as uncertain economic conditions lie ahead.” [Plastics & Rubber Products]

“Slight improvement on overall business conditions from the previous month.” [Primary Metals]

Manufacturing ISM® Report On Business® data is seasonally adjusted for the New Orders, Production, Employment and Inventories indexes.

*Number of months moving in current direction.

Commodities Reported Up/Down In Price And In Short Supply 

Commodities Up in Price

Electrical Components; Electricity; Electronic Components (24); and Labor — Temporary (3).

Commodities Down in Price

Aluminum (7); Copper (2); Freight; Lumber (3); Ocean Freight (3); Plastic Resins (6); Polypropylene (4); Steel (7); Steel — Carbon (5); Steel — Hot Rolled (7); and Steel Products (5).

Commodities in Short Supply


Electrical Components (26); Electronic Components (24); Hydraulic Components (7); Rubber Based Products; Semiconductors (24); and Steel Products.

Note: The number of consecutive months the commodity is listed is indicated after each item.

November 2022 Manufacturing Index Summaries

Manufacturing PMI®

The U.S. manufacturing sector contracted in November, as the Manufacturing PMI registered 49 percent, 1.2 percentage points below the reading of 50.2 percent recorded in October. “After five months of flat or marginally positive change, the decrease last month took the Manufacturing PMI into contraction. Of the five subindexes that directly factor into the Manufacturing PMI, two (Production and Inventories) were in growth territory, though both eased. The PMI registered its lowest level since May 2020, when the index was 43.5 percent. Of the six biggest manufacturing industries, two — Petroleum & Coal Products; and Transportation Equipment — registered weak-to-moderate growth in November. The Production Index decreased 0.8 percentage point, inching closer to contraction territory. Supply chain congestion continued to ease, indicated by the Supplier Deliveries Index showing faster deliveries. Only two of the 10 subindexes were positive for the period,” Fiore said. A reading above 50 percent indicates that the manufacturing sector is generally expanding; below 50 percent indicates that it is generally contracting.

A Manufacturing PMI above 48.7 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the November Manufacturing PMI indicates the overall economy grew in November for the 30th consecutive month following contraction in April and May 2020. “The past relationship between the Manufacturing PMI and the overall economy indicates that the Manufacturing PMI for November (49 percent) corresponds to a 0.1-percent increase in real gross domestic product (GDP) on an annualized basis,” says Fiore.

The Last 12 Months

New Orders

ISM’s New Orders Index contracted for the third consecutive month in November, registering 47.2 percent, a decrease of 2 percentage points compared to the 49.2 percent reported in October. “None of the six largest manufacturing sectors reported increased new orders. Price and lead time declines as well as backlog contraction should encourage buyers to reenter the market and sales agents to be more aggressive in seeking new business,” says Fiore. (For more on lead times, see the Buying Policy section of this report.) A New Orders Index above 52.9 percent, over time, is generally consistent with an increase in the Census Bureau’s series on manufacturing orders (in constant 2000 dollars).

Of the 18 manufacturing industries, only one reported growth in new orders in November: Apparel, Leather & Allied Products. Fourteen industries reported a decline in new orders in November, in the following order: Wood Products; Printing & Related Support Activities; Paper Products; Primary Metals; Nonmetallic Mineral Products; Electrical Equipment, Appliances & Components; Fabricated Metal Products; Machinery; Plastics & Rubber Products; Chemical Products; Transportation Equipment; Miscellaneous Manufacturing; Food, Beverage & Tobacco Products; and Computer & Electronic Products.

Production

The Production Index registered 51.5 percent in November, 0.8 percentage point lower than the October reading of 52.3 percent, indicating growth for the 30th consecutive month. “Of the top six industries, only two — Computer & Electronic Products; and Transportation Equipment — expanded in November. Materials and labor availability continue to improve, as panelists’ companies begin to significantly reduce their backlogs of overdue orders,” says Fiore. An index above 52.4 percent, over time, is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures.

The seven industries reporting growth in production during the month of November — listed in order — are: Apparel, Leather & Allied Products; Primary Metals; Nonmetallic Mineral Products; Computer & Electronic Products; Plastics & Rubber Products; Transportation Equipment; and Electrical Equipment, Appliances & Components. The seven industries reporting a decrease in production in November — in the following order — are: Printing & Related Support Activities; Textile Mills; Furniture & Related Products; Machinery; Food, Beverage & Tobacco Products; Miscellaneous Manufacturing; and Fabricated Metal Products.

Employment

ISM’s Employment Index registered 48.4 percent in November, 1.6 percentage points lower than the October reading of 50 percent. “The index indicated employment contracted after being unchanged for one month. Of the six big manufacturing sectors, only two (Food, Beverage & Tobacco Products; and Machinery) expanded. Labor management sentiment continued to shift, with a number of panelists’ companies reducing employment levels through hiring freezes, attrition, and now layoffs. In November, layoffs were mentioned in 14 percent of employment comments, up from 6 percent in October. Turnover rates remained consistent, with 30 percent of comments citing backfill and retirement issues, generally the same rate since September. For those companies expanding their workforces, comments continue to support an improving hiring environment,” says Fiore. An Employment Index above 50.5 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.

Of 18 manufacturing industries, seven reported employment growth in November, in the following order: Apparel, Leather & Allied Products; Primary Metals; Miscellaneous Manufacturing; Electrical Equipment, Appliances & Components; Plastics & Rubber Products; Food, Beverage & Tobacco Products; and Machinery. The five industries reporting a decrease in employment in November are: Textile Mills; Paper Products; Computer & Electronic Products; Chemical Products; and Fabricated Metal Products. Six industries reported no change in employment in November compared to October.

Supplier Deliveries†


The delivery performance of suppliers to manufacturing organizations was faster for a second straight month in November, as the Supplier Deliveries Index registered 47.2 percent, 0.4 percentage point higher than the 46.8 percent reported in October. Prior to October, the last reading under 50 percent was in February 2016 (49.6 percent); this is the first time the index has spent consecutive months in “faster” territory since October-December 2015. Of the top six manufacturing industries, one (Petroleum & Coal Products) reported slower deliveries. “Although a touch slower than the previous month, the November reading indicates the best month-over-month supplier deliveries performance in more than a decade (since February 2012, when the index registered 47 percent). In November, 86.1 percent of panelists reported ‘same’ or ‘faster’ delivery times. Panelists’ comments overwhelmingly confirmed that suppliers performed better in November compared to previous months,” says Fiore. A reading below 50 percent indicates faster deliveries, while a reading above 50 percent indicates slower deliveries.

Six of 18 manufacturing industries reported slower supplier deliveries in November, in the following order: Apparel, Leather & Allied Products; Textile Mills; Petroleum & Coal Products; Nonmetallic Mineral Products; Primary Metals; and Miscellaneous Manufacturing. The 11 industries reporting faster supplier deliveries in November as compared to October — in the following order — are: Wood Products; Electrical Equipment, Appliances & Components; Paper Products; Plastics & Rubber Products; Furniture & Related Products; Fabricated Metal Products; Chemical Products; Computer & Electronic Products; Machinery; Food, Beverage & Tobacco Products; and Transportation Equipment.

Inventories

The Inventories Index registered 50.9 percent in November, 1.6 percentage points lower than the 52.5 percent reported for October. “Manufacturing inventories expanded at a slower rate compared to October. The index recorded its lowest level since July 2021, when it registered 49.1 percent. Of the six big manufacturing industries, four (Machinery; Computer & Electronic Products; Transportation Equipment; and Chemical Products) increased manufacturing raw material inventories in November. Panelists’ companies continue their efforts to reduce their total supply chain inventories, indicated by the contraction in new orders, slow expansion in manufacturing inventories and the ‘just right’ level of customers’ inventories,” says Fiore. An Inventories Index greater than 44.4 percent, over time, is generally consistent with expansion in the Bureau of Economic Analysis (BEA) figures on overall manufacturing inventories (in chained 2000 dollars).

Of 18 manufacturing industries, the eight reporting higher inventories in November — in the following order — are: Nonmetallic Mineral Products; Electrical Equipment, Appliances & Components; Miscellaneous Manufacturing; Primary Metals; Machinery; Computer & Electronic Products; Transportation Equipment; and Chemical Products. The eight industries reporting contracting inventories in November — in the following order — are: Printing & Related Support Activities; Wood Products; Textile Mills; Apparel, Leather & Allied Products; Paper Products; Fabricated Metal Products; Petroleum & Coal Products; and Plastics & Rubber Products.

Customers’ Inventories†

ISM’s Customers’ Inventories Index registered 48.7 percent in November, 7.1 percentage points higher than the 41.6 percent reported for October. “Customers’ inventory levels are considered essentially ‘just right.’ The index recorded its highest level since April 2020 (48.8 percent). The current index level is no longer providing positive support to future manufacturing expansion,” says Fiore.

Six industries reported customers’ inventories as too high in November, in the following order: Textile Mills; Paper Products; Wood Products; Primary Metals; Chemical Products; and Electrical Equipment, Appliances & Components. The eight industries reporting customers’ inventories as too low in November — listed in order — are: Nonmetallic Mineral Products; Machinery; Petroleum & Coal Products; Miscellaneous Manufacturing; Transportation Equipment; Food, Beverage & Tobacco Products; Computer & Electronic Products; and Fabricated Metal Products.

Prices†

The ISM Prices Index registered 43 percent in November, 3.6 percentage points lower compared to the October reading of 46.6 percent, indicating raw materials prices decreased for the second time in 29 months. This is the index’s lowest level since a reading of 40.8 percent in May 2020. Over the past eight months, the index has decreased 44.1 percentage points, including a combined 26-percentage point plunge in July and August. None of the top six manufacturing industries reported increases in prices in November. “Price declines continue to be driven by relaxation in energy markets, copper, steel, aluminum, plastics, corrugate and as well as volatility in freight costs. Notably, 87 percent of respondents reported paying the same or lower prices in November, compared to 80 percent in October,” says Fiore. A Prices Index above 52.6 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) Producer Price Index for Intermediate Materials.

In November, only one industry reported paying increased prices for raw materials: Miscellaneous Manufacturing. The 10 industries reporting paying decreased prices for raw materials in November — in the following order — are: Textile Mills; Wood Products; Furniture & Related Products; Fabricated Metal Products; Plastics & Rubber Products; Transportation Equipment; Chemical Products; Electrical Equipment, Appliances & Components; Machinery; and Computer & Electronic Products. Seven industries reported no change in prices in November compared to October.

Backlog of Orders†


ISM’s Backlog of Orders Index registered 40 percent in November, a 5.3-percentage point decrease compared to October’s reading of 45.3 percent, indicating order backlogs contracted for the second consecutive month after a 27-month period of expansion. Of the six largest manufacturing sectors, only one — Machinery — expanded order backlogs in November. “Backlogs contracted again in November at a notable rate, as weak new order levels combined with production expansion negatively impacted manufacturing books of business,” says Fiore. “The index recorded its lowest level since May 2020, when it registered 38.2 percent.”

Two industries reported growth in order backlogs in November: Apparel, Leather & Allied Products; and Machinery. Twelve industries reported lower backlogs in November, in the following order: Wood Products; Textile Mills; Printing & Related Support Activities; Paper Products; Primary Metals; Furniture & Related Products; Chemical Products; Plastics & Rubber Products; Computer & Electronic Products; Electrical Equipment, Appliances & Components; Transportation Equipment; and Fabricated Metal Products.

New Export Orders† 

ISM®’s New Export Orders Index registered 48.4 percent in November, 1.9 percentage points higher than the October reading of 46.5 percent. “The New Export Orders Index contracted in November for the fourth consecutive month after 25 straight months in expansion territory. Weakness in European economies and China’s economic sluggishness, as well as the strong dollar, continued to constrain new export order activity and negatively impact new order rates,” says Fiore.

Three industries reported growth in new export orders in November: Nonmetallic Mineral Products; Plastics & Rubber Products; and Food, Beverage & Tobacco Products. The four industries reporting a decrease in new export orders in November are: Fabricated Metal Products; Chemical Products; Machinery; and Computer & Electronic Products. Ten industries reported no change in new export orders in November compared to October.

Imports†


ISM’s Imports Index registered 46.6 percent in November, a decrease of 4.2 percentage points compared to October’s figure of 50.8 percent. “The index moved into contraction in November after five months of expansion, dropping to its lowest level since May 2020 (41.3 percent),” says Fiore.

The four industries reporting growth in imports in November are: Apparel, Leather & Allied Products; Computer & Electronic Products; Miscellaneous Manufacturing; and Transportation Equipment. Nine industries reported lower volumes of imports in November, in the following order: Wood Products; Paper Products; Petroleum & Coal Products; Nonmetallic Mineral Products; Chemical Products; Fabricated Metal Products; Electrical Equipment, Appliances & Components; Machinery; and Food, Beverage & Tobacco Products.

†The Supplier Deliveries, Customers’ Inventories, Prices, Backlog of Orders, New Export Orders, and Imports indexes do not meet the accepted criteria for seasonal adjustments.

Buying Policy

The average commitment lead time for Capital Expenditures in November was 177 days, a decrease of two days compared to October. Average lead time in November for Production Materials was 84 days, a decrease of nine days. Average lead time for Maintenance, Repair and Operating (MRO) Supplies was 44 days, a decrease of four days.

Posted: December 1, 2022

Source: Institute for Supply Management

ZURICH — November 30, 2022 — Established in 1946 in Viet Bac (northern region of Vietnam), Garco 10 initially focused on making military uniforms. Today, Garco 10 is one of the largest enterprises in Vietnam’s apparel and textile industry with a total of 19 factories. They manufacture and export nearly 30 million garments per year.

Founded in 1904, the ITMF is the international forum of the global textile value chain for producers of fiber to finished products. Its members are from textile and apparel-producing countries representing approximately 90 percent of global production.

Than Duc Viet, CEO of Garment 10 Corporation said that “being part of an international forum like ITMF that represents the entire textile value chain — from fiber to finished goods — is very valuable. Having access to an international network like ITMF provides Garco 10 access to companies and people from around the world in a cooperative environment. Furthermore, it is important to follow and to be part of the discussions about trends and initiatives in our industry. The publications, reports and surveys that ITMF produces are helping us to better understand the underlying dynamics in our industry”.

“We are delighted that Garco 10 is joining ITMF as a Corporate Member. Garco 10 is a leading producer and exporter of garments in Vietnam. Becoming part of the ITMF family will be mutually beneficial as it will provide an additional perspective on Vietnam for members of ITMF as it will provide Garco 10 with insights of other markets. The global textile and apparel industry is constantly undergoing structural changes — sometimes slower and sometimes faster. Currently, the changes and dynamics are unprecedented and therefore an international forum for exchange and discussion is providing added value ”, stated Dr. Christian Schindler, director general of ITMF.

Posted: November 30, 2022

Source: International Textile Manufacturers Federation (ITMF)