CeramTec Introduces Standard S Friction Disc With Super Surface

Germany-based CeramTec GmbH has engineered a new surface structure for its Standard S friction discs used in the nylon texturing processes. According to the company, when the new discs were used on a Barmag eFK machine with a 1/6/1 setup to produce 78/68 decitex nylon 6,6 yarns, elongation improved by more than 6 percent, and strength increased by more than 5 centiNewtons per tex when compared to yarns produced using the standard discs.

The new surface modification process creates a disc with a roughness of Ra 0.85 ± 0.15 micrometers, but finer roughness also is available on request.

NPCeramtec
The new surface structure of the CeramTec Standard S friction discs can improve the properties of textured nylon yarns.

January/February 2016

SDL Upgrades Three Core Instruments

Rock Hill, S.C.-based SDL Atlas Inc. has upgraded three of its core laboratory testing instruments. The Martindale Abrasion and Pilling Tester, the Rotawash Colorfastness Tester and ICI Pilling and Snagging Tester — now known as RotaPill Pilling and Snagging Tester — now feature a state-of-the-art multilingual touch-screen controllers. All three models also were redesigned for function as well as appearance. The Martindale’s new design incorporates a storage rack for the light weight motion plate. The Rotawash now is constructed using stainless steel, and the washpots press into place on the new design making changes easier. The RotaPill now features magnetic cork-lined plates that can accommodate snagging points for easy cork changes and to eliminate the need for a second set boxes dedicated to snagging.

January/February 2016

People

The Bloomfield Hills, Mich.-based Crypton Companies and Nanotex® hired Michael Grigat as vice president, research and development. In addition, Hardy Sullivan has been promoted to vice president, market development.

Dr. David Hinks has been named dean of North Carolina State University’s College of Textiles, Raleigh, N.C., after serving as its interim leader since July 2014

New York City-based Alvanon Inc. has named Tracy Woosley senior consultant.

Israel-based Nilit Fibers has appointed Marco De Silvestri vice president, Nilit Israel.

Christopher Veit is now in charge of global manufacturing, research and development, and human resources with the Veit Group, Germany.

Glenn Funk has joined New York City-based Simparel Inc. as senior director, enterprise solutions and product strategy.

Aceto Corp., Port Washington, N.Y., named Scott Herrington senior account manager, Specialty Chemicals.

Troy Corp., Florham Park, N.J., has named Jan S. Beck vice president and general counsel.

Paris-based Lectra has named Jean-Patrice Gros director, Lectra Northern Europe.

TSG Finishing, Hickory, N.C., has hired Charles Gossett as director of operations.

Effective February 15, 2016, Rick Helfenbein will assume the role of president and CEO of the Washington-based American Apparel & Footwear Association (AAFA).

Andreas Wirz has joined Switzerland-based Crealet AG as a technical assistant.

Cordova, Tenn.-based National Cotton Council of America announced Dr. David B. Weaver as the recipient of the 2015 Cotton Genetics Research Award.

Italy-based Eurojersey S.p.A. has appointed Matteo Cecchi sales director.

Nordine Meniai was named new business unit manager, packaging, ITW Dynatec, Hendersonville, Tenn.

January/February 2016

ITMA 2015: Success In Milan

Despite concerns prior to the event, ITMA 2015 was a success.

By Rachael S. Davis, Managing Editor

There were some reservations leading up to ITMA 2015 — which was held in Milan, Italy, November 12-19, 2015 — about just how successful the event would be.

Concerns about global economic uncertainties, especially the growth rate of China’s gross domestic product; the timing of the show with it occurring so late in the year; and questions about the value of an ITMA in Europe today all swirled around show preparations.

But despite all the reservations and concern before the event, ITMA was a resounding success. The halls were busy for the entire show, and seemed to be full of excitement and energy. Many exhibitors reported their booths were constantly busy with high-level customers during the show, and many exhibitors were happy to report strong sales during and after the show.

The overall success of the show was summed up perfectly in a comment from Carlo Rogora, CEO, ITEMA Group. “Considering the current situation in the textile industry in some markets, we are pleasantly surprised with these results,” Rogora said. “ITMA 2015 has been especially satisfactory, both in terms of the organization and logistics of the show and the significant level of attendance of customers. The contacts and orders we established, above all from India[n] and [Turkish] markets, largely exceeded our expectations.”

ITMAreview1
At 10 a.m. on the first day, visitors were lining up to enter the Fiera Milano Rho. Photograph courtesy of ITMA 2015.

Exhibitor, Visitor Success

The success of the show was confirmed by the post-show numbers released by the show’s owners the European Committee of Textile Machinery Manufacturers (CEMATEX), and organizers Singapore-based MP Expositions Pte. Ltd. The show hosted the largest number of exhibitors since its inception in 1951. Some 1,691 exhibitors participated from 46 countries and economies, which breaks the previous record of 1,451 exhibitors set in 2007 at ITMA in Munich, Germany. Net floorspace totaled 108,000 square meters and covered 11 halls at the Fiera Milano Rho fairgrounds in Milan. The total exhibit space was approximately 20-percent larger than floorspace at ITMA 2011.

“ITMA has a very strong reputation as the world’s most established textile and garment exhibition,” said Charles Beauduin, president, CEMATEX. “We are grateful to our exhibitors and industry partners who have put their faith in the ITMA brand. The key to ITMA’s success is its ability to reinvent itself and remain relevant to the industry that it serves.”

Exhibitors from Europe occupied by far the largest amount of floorspace at the show with 69-percent of the total net exhibit space. Of those exhibitors, 453 Italy-based companies occupied 32,540 square meters of floorspace and the 238 Germany-based companies booked 21,380 square meters of exhibit space.

From outside of Europe, companies from Turkey, China, India and Japan booked the greatest amount of floorspace.

Visitor numbers also were impressive during the eight-day event. The show attracted approximately 123,000 visitors from 147 economies, which was an increase of 20-percent compared to numbers recorded in 2011. The visitors also were reported to be high-quality attendees.

“We registered a 20-percent jump in visitors numbers compared with ITMA 2011,” said Beauduin. “More importantly, from participants’ feedback, we can confidently say that this is one of the best ITMA exhibitions! Our message on sustainability has resonated greatly with buyers.

“Our exhibitors have discovered that the visitors — whether they are seasoned ITMA visitors or attending the exhibition for the first time — are serious about checking out new innovative solutions to improve their competitive edge.”

Sustainability

ITMA’s theme, was “Master the Art of Sustainable Innovation.” Exhibitors certainly embraced the theme, and much of the technology presented at the show offered some sort of energy, costs and materials savings all contributing to more sustainable production.

“We felt for the first time there’s a real understanding and interest in energy efficiency and green technology,” said Regina Brückner, CEO of Brückner Trockentechnik GmbH & Co KG, Germany. “There’s a trend among our customers to want to upgrade their very old equipment because they understand the necessity of a highly productive and efficient production over the entire textile production process.”

Textile World will have more in-depth coverage of the various technologies on display at ITMA in the next few issues. Spinning and knitting technologies appear in this issue; and wet processing, nonwovens, digital printing and weaving will be covered in future issues.

Around The Fairgrounds

The busy booths suggested that a lot of business was taking place, and reports from exhibitors confirmed just as much. Exhibitors also used the occasion to share news and celebrate milestones.

Erwin Devloo, marketing communications manager, Belgium-based weaving machine manufacturer Picanol NV, reported the company had sold more machines in one day at the show than ever before.

After the show, Switzerland-based Oerlikon’s Manmade Fibers Segment received a number of large orders worth approximately $50 million for its Oerlikon Neumag staple fiber plant engineering technologies.

The Netherlands-based SPG Prints hosted a press conference to introduce its Pike® single-pass digital printing machine featuring Archer® technology. After the show, the new machine was heading to customer Germany-based KBC Fashion GmbH.

Germany-based LTG AG was at the show promoting a new compact drum filter that can be shipped completely assembled. The company also was celebrating its 90th anniversary. Gerhard Seyffer, president, LTG Inc., Spartanburg, S.C., said the quantity of visitors was very good during the show, and the company sold some equipment.

Switzerland-based Bräcker AG used ITMA to celebrate the company’s 180th anniversary. Daniel Link, managing director, underlined the success of the company and its products and recalled some of the history during a celebration at the company’s booth.

Germany-based Trützschler GmbH & Co. KG had a banner in its booth announcing that the company had reached a milestone during 2015 —selling its 50,000th carding machine.

Germany-based DiloGroup CEO Johann Philipp Dilo signed over a state-of-the-art universal compact line for needling recycled carbon fiber that was on display in the booth to the Institut für Textiltechnik Ausburg gGmbh. The line includes material storage and feeding, carding and stackers, needle machine and winder. The generous donation will be used to advance carbon fiber research, and Dilo said the machine will get more use at the institute than if it was at a Dilo facility. DiloGroup reported initiating a large number of new projects as well as receiving numerous orders for deliveries during ITMA.

ITMAreview2
(left to right): Prof. Dr. Stefan Schlichter, Johann Philipp Dilo and Prof. Dr. Thomas Gries, with the compact line the DiloGroup presented to Institut für Textiltechnik Ausburg gGmbh for research purposed.

At a press conference hosted by China High-Tech Group Corp., parent company of Fong’s Industries, Roland Hampel, joint managing director of Germany-based A. Monforts Textilmaschinen GmbH & Co. KG announced the company had acquired the know-how of Austria-based Timatec Corp. Timatec specializes in coating and has a wide portfolio of coating equipment — including knife-over-air, knife-over-roller, magnetic roller and printing-head coating options — that now will be manufactured at the Monforts Montex plant in Austria.

MS Printing Solutions hosted a special “Transparent as Water” debate centered on sustainability. The event explored sustainability and the associated sociological and cultural implications and featured Francesco Morace, a sociologist and essayist who worked in social and market research for more than 30 years; Piero Formica, an economist, professor and founder of the International Entrepreneurship Academy; and Giuseppe Miroglio, president of Italy-based textile printing company Miroglio Group.

This is just a small slice of the events, happenings and business that took place during ITMA.

Next Show

CEMATEX announced that ITMA will return to Barcelona in June 2019. A somewhat surprising choice, given that the city hosted the event in 2011, and Munich was considered the front-runner. However, participants were happy with Barcelona as a venue, and the industry looks forward to another record-breaking show.

January/February 2016

Profitability Of T-Move Can Filling Station And Spinning Cans With 1,200-mm Diameter

ITA performed a study on the increasing size of spinning cans over time

By Frederik Cloppenburg, Alexander Janßen and Professor Dr. Thomas Gries

T

he diameter of spinning cans has significantly increased over recent decades. Cans with a diameter of 1,000 millimeters (mm) are well-established today. At ITMA 2015 in Milan, Italy, Germany-based Trützschler GmbH & Co. KG presented many innovations including spinning cans with a 1,200-mm diameter and a filling station for cards that changes 1,200 mm diameter cans with significantly higher card delivery speeds than existing rotary can changers.

The Institut für Textiltechnik der RWTH Aachen University (ITA), Germany, examined the profitability and effects on the amount of manual work required by the innovation. The study was performed on two sample processes for a new investment into a spinning mill.

Studied Processes

The typical production processes for carded and combed ring spun yarn were analyzed. Based on the typically used conventional cans with a 1,000 mm diameter, the profitability of the additional investment in cans with a 1,200 mm diameter was studied. To ensure a realistic calculation of the cost efficiency, the process chains analyzed were calculated for installations in Turkey, which produces Ne 30 ring spun yarn, carded; and India, which manufactures Ne 30 ring spun yarn, combed.

TrutzschlerTmove
Figure 1: Trützschler card with T-MOVE filling station and 1,200-mm diameter cans. Photograph courtesy of Trützschler.

The series of assumptions were made for the calculation of the profitability of 1,200 mm spinning cans.

A Greenfield scenario was used. Whether the extra investment for machinery and cans with a 1,200 mm diameter is cost efficient for a new investment was analyzed.

In order to eliminate the effect of volatile exchange rates, all calculations are made in U.S. dollars. The costs for staff, production area, capital interest rates and annual operating hours are based on the “International Production Cost Comparison 2014” compiled by Switzerland-based International Textile Manufacturers Federation (ITMF). Thus the capital interest rate amounts to 9.3 percent in Turkey and 12.8 percent in India.

The flyer production uses 600 mm cans at maximum. Thus the Trützschler TD 8 draw frames fill the sliver into cans with a 600 mm diameter in both cases. The height of the cans is 1,200 mm regardless of the diameter of the can. Therefore the material quality remains unaffected by the increased volume because the compression of the material remains constant. The increase in efficiency of the card was calculated to be 1.1 percent. This originates from the bigger can diameter, as well as the new filling station that performs can changes at higher delivery speeds. Therefore fewer and faster can changes are performed.

TrutzschlerFig2
Figure 2: Process chains for carded and combed yarns. Image courtesy of Trützschler

As the additional investment is analyzed, only cash flows that occur because of the use of 1,200 mm cans were taken into consideration. The following costs and earnings are considered for the calculation of the profitability.

The initial investments considered are machine costs and the required number of cans. The retail price for a card increases by approximately 6 percent if a T-Move filling station is used. The costs for other machinery increases by 5 percent — draw frame TD 9 and combing machine TCO 12. These assumptions were made in agreement with Trützschler. The price of the spinning cans increases proportionally with the increase in volume by approximately 40 percent. The number of cans required for production is based on the average amounts for material buffer and handling.

TrutzschlerTable1
Table 1: Spinning Processes Studied

The operating costs and earnings consist of the cotton price and the retail price for the produced cotton yarns. The cotton price amounts to $2.06 per kilogram (kg) in Turkey, and $2.21 per kg in India, according to ITMF’s International Production Cost Comparison 2014. The price is based on the average cotton price of the last week of May 2014.

The retail prices for cotton yarns and noils obtained by the spinning mills were taken from a survey consulting different yarn traders and spinning mills in September 2015. The determined prices in September 2015 were scaled to the last week of May 2014, based on development of the stock exchange price for cotton, in order to eliminate effects through different cotton prices.

Results: Profitability Of The Additional Investments

The net present value and the payoff time of the additional investments were calculated for the representative spinning mills. The net present value of an investment is the sum of all present day values of all cash flows, discounted using the capital interest rate. If the net present value is positive the additional investments are generally cost efficient*.

The payoff time is the duration it takes for the net present value of all cash flows to add up to zero, or a positive value*. In other words, the payoff time specifies how quickly the additionally invested money is regained. The shorter the payoff time the lower the economic risk by unforeseeable effects like the volatility of the cotton price. In economic practice, a maximum payoff time of three years is often used to make investment decisions.

The effect on the productivity of the analyzed spinning mills of the additional investment in spinning cans with a 1,200 mm diameter is shown in Table 2.

TrutzschlerTable2
Table 2: Effects of using T-Move and 1,200-mm-diameter cans on the productivity of a spinning mill

The effect may seem small, but over a 10-year operating period a significant effect arises, as shown in Table 3 and Figure 3.

TrutzschlerTable3
Table 3: Net present value and payoff time of the additional investment in 1,200 mm diameter cans assuming an operating time of 10 years

The longer payoff time of the combed process originates from the higher initial investment compared to the carded process. The 18 combing machines equipped with 1,200 mm can filling stations are critical for that. Nevertheless the higher payoff time of 11 months is lower than the maximum payoff time of 36 months which is used in economic practice.

Therefore the cost-efficiency of the additional investment in a spinning mill that uses cans with a 1,200 mm diameter is hereby assigned.

TrutzschlerFig3

Effects On The Amount Of Manual Work

Beside the financial profitability, the effect of bigger spinning cans and a T-Move can filling station on the amount of manual work was examined. Because of the higher volume, fewer can changes occur on all machines equipped with 1,200 mm cans. The machine operators are able to save a significant amount of time with fewer can transportation processes. Time savings are calculated as shown in Tables 5 and 6. The time needed for one can transport between two machines was estimated at 1 minute. The time needed for piecing all slivers after the gate of a draw frame has run empty was estimated at 4 minutes. The time for piecing a sliver in the comber was estimated at 30 seconds.

Depending on the mill size, the time savings allow a reduction of operating staff or an extension of the tasks of the operator, for example to clean machines. It is to be expected that errors such as sliver breaks can be repaired quicker if bigger cans are used because the operators are less bound in transportation or piecing tasks.

TrutzTable5
Table 5

Summary

The study looked at whether the investment in spinning cans with a 1,200-millimeter diameter and modern can filling station is cost efficient. The effect on the amount of manual work also was analyzed. Characteristic values for the cost efficiency are the net present value and the payoff time of the additional investment for a Greenfield scenario.

The calculations are based on two representative spinning mills for combed and carded Ne 30 ring-spun yarn.

TrutzTable6
Table 6

The cost efficiency of the additional investment is shown as follows:

  • The net present value of the additional investment amounts to $1.776 million for carded yarn and $1.353 million for combed yarn;
  • The payoff time amounts to 5 months for carded yarn, and 11 months for combed yarn. The higher payoff time of the combed process originates from the necessary equipment of the combing machines with 1,200 mm can filling stations.

Because there are fewer can changes, 20 minutes per operating hour can be saved for the carded ring-spun yarn process, and 30 minutes per operating hour is saved with the combed yarn process.

 

*Tietze, J., “Einführung in die Finanzmathematik” (Introduction into financial mathematics), 11th Edition, Wiesbaden: Vieweg + Teubner Verlag, 2011


Editor’s Note: Frederik Cloppenburg and Alexander Janßen work in the textile machinery department; and Dr. Thomas Gries is a professor and head of the Institut für Textiltechnik, the textile machinery and processes research arm of RWTH Aachen University, Germany.


 

January/February 2016

APDN, USDA Sign Cotton Genotyping CRADA

Stony Brook, N.Y.-based Applied DNA Sciences Inc. (APDN) has signed a Cooperative Research and Development Agreement (CRADA) with the U.S. Department of Agriculture (USDA). APDN reports the CRADA will enhance its fiberTyping® identification method for cotton species and cultivars allowing the company to genetically verify multiple types of individual cotton cultivars, which in turn will protect quality, traceability and economic interests. Under the agreement, APDN has the option to negotiate an exclusive license for any inventions created jointly or by the USDA.

“Our collaboration with the USDA will accelerate our ability to identify key cultivars for specific cotton-growing regions based on our patented technology,” said Dr. Mike Hogan, vice president, Life Sciences, APDN. “We believe the synergy of our expertise, together with the expertise of the cotton genomics experts at USDA, will result in a library of key cotton genome targets for commercial use. Consequently, we will be able to identify the fibers that are most desirable, and exclude fibers that are harvested from regions known to use forced or underage labor.”

January/February 2016

ICA Bremen Developing Full Traceability System

Germany-based ICA Bremen is developing a full traceability system for cotton. The cotton testing laboratory reports it has made progress in accurately measuring the percentage of marked cotton — cotton that had an identifier added during the ginning stage — in final garments with a simple scanning step. ICA Bremen’s goal is to quantify results with a percentage, versus providing a yes or no answer. The technology is ready to undergo field trials after completing testing in the laboratory.

“Our traceability system will be a massive step forward for major brands, retailers and growers, replacing the current tagging system and cutting out the need for supply chain certification services,” said Kai Hughes, managing director, ICA Bremen.

January/February 2016

Südwolle Group Acquires Safil, GTI

Germany-based worsted yarn producer Südwolle Group has acquired Safil S.p.A., as well as an 80-percent share in Gruppo Tessile Industriale (GTI), both worsted yarn manufacturers based in Italy. Südwolle acquired Safil and 50 percent of the GTI shares from Italy-based Finsavio S.p.A. Cesare Savio and Alberto Savio, Finsavio owners and sons of Safil founder Fernando Savio, will continue as Safil’s CEO and CFO respectively.

The remaining 30 percent of GTI was acquired from Alberto Frignani, founder and CEO of GTI. Frignani retained the remaining 20 percent of GTI shares, and continues as CEO of the company.

No financial terms of the acquisition were disclosed.

The resulting enhanced yarn portfolio allows Südwolle to offer fashion, luxury and non-apparel customers a greater selection of products. The company also gains a strong foothold in the Italian yarn markets.

January/February 2016

PolyOne Acquires Magenta

Cleveland-based polymer provider PolyOne Corp. has acquired Magenta Master Fibers, a developer of specialty solid color concentrates for the fiber industry, from BASF for $22 million. Magenta has operations in Milan, Italy, and Shanghai, and joins PolyOne’s Global Color, Additives and Inks segment. In 2016, PolyOne expects the acquisition to add $16 million to revenues and be accretive to earnings.

“By offering both liquid and solid masterbatch solutions, we better ensure that the chosen technology is the best one for each customer’s specific needs,” said John V. Van Hulle, president, Global Color, Additives and Inks, PolyOne. “With our acquisition of Magenta, we’re very pleased to be building this same, deep breadth of specialty solid and liquid colorant solutions for fiber applications.”

January/February 2016

IR-Reflecting Fiber Trials

Germany-based Kelheim Fibres continues to advance the development of its infrared (IR)-reflecting fibers. The company has conducted spinning trials during which mineral-based IR-reflecting particles in different concentrations were permanently incorporated into a viscose fiber’s core. According to Kelheim, testing indicates the fibers can effectively reflect sunlight and provide a cooling benefit. At the same time, the fiber can reflect thermal radiation emitted by the body back to the body to provide a warming sensation.

“Comfortable feel-good clothes and functional special clothing are just two obvious applications for our new IR fiber,” said Dr. Daniela Bauer, research & development, Kelheim Fibres. “The level of loading can be adapted according to the requirements of the final product, which provides high versatility. As a next step, the fiber will be tested for its effectiveness in various end-applications in cooperation with our partners.”

January/February 2016

Sponsors