New DIN Rail Mounted EMI Filter Series From API Eases Installation And Enhances EMI Protection For Improved EMC Compliance

MARLBOROUGH, Mass. — June 15, 2018 — API Technologies Corp. (API), a leading provider of high performance RF and microwave signal conditioning and electromagnetic spectrum management solutions, announced its new series of DIN Rail Mounted EMI Filters for medical to metrology grade applications, featuring reduced installation complexity. API’s 62-STB series of DIN rail mounted, single phase power EMI filters eliminate both differential mode and common mode electromagnetic interference (EMI) and meet stringent Electromagnetic Compatibility (EMC) compliance specifications. They are ideal for reducing unwanted interference for industrial applications and high power office/medical equipment and instruments, such as:

  • Test and measurement instruments;
  • Medical X-ray machines;
  • Medical bone mineral densitometry devices;
  • Electrical installation control panels;
  • Textile Machinery;
  • Powered exercise equipment (treadmills and etc.);
  • Electrical boilers and HVAC equipment;
  • Refrigeration units;
  • Printers; and
  • Low and high voltage power supplies.

The enhanced intelligence and performance requirements of new electronics bring greater susceptibility to outside EMI. In fact, the demand for EMC compliance in industrial, office and medical environments is intensifying as highly EMI-sensitive digital, analog and RF/microwave electronics are increasingly employed to enhance efficiency, reduce costs and enable innovative solutions. EMI power filters are a low-cost solution for designing in better EMC compliance or retrofitting existing equipment negatively impacted by EMI.

API’s DIN rail mounted EMI filters are easily integrated, installed and connected externally or internally to existing equipment, control panels and the power line. They also can be easily replaced, retrofit or serviced and mount to any DIN rail system. Several models include chassis mounting features for greater customization and utility.

API’s DIN rail mounted power filters feature 50/60 Hz rated voltage operation to 250 VAC; models in the series range from 6 A to 30 A maximum rated current. Though capable of substantial power handling, these EMI filters exhibit very low maximum leakage current, typically 0.5 mA at 250 VAC, with models available that reach a maximum of 0.1 mA. The EMI filters’ low maximum voltage drop is less than 1.0 V.

API’s DIN rail mounted noise filters demonstrate high insulated resistance of 300 MΩ at 500 VDC between the power line and ground. Moreover, these EMI filters are built to survive industrial temperatures, with an operating temperature range from -25°C to +85°C, including a maximum temperature rise of 45℃. They can be made with enhanced high pulse and high noise attenuation features to meet a wider range of operational requirements.

Key Performance Features:

  • Easy connection and installation (Chassis or DIN rail mount);
  • High reliability (high strength epoxy molded);
  • High insulation resistance (300MΩ between line and ground);
  • Low leakage current versions (<0.1mA at 250 VAC 60 Hz);
  • 6 A to 30 A 250 VAC Models;
  • High pulse attenuation versions; and
  • High noise attenuation versions.

API’s DIN rail mounted EMI filters are safety agency approved, ruggedly manufactured with epoxy-molded housing, RoHS compliant, and designed to meet all applicable industrial standards.

Posted June 15, 2018

Source: API Technologies Corp.

Gore Announces NFPA 1994, Class 3R Certified Suit: Highly Breathable Protection In Contaminated Environments

ELKTON, Md. — May 29, 2018 — W. L. Gore & Associates has expanded its line of certified products for emergency responders with the addition of the Ruggedized Class 3 suit made of GORE® CHEMPAK® selectively permeable fabric. Manufactured and distributed by Blauer® Manufacturing Company Inc., the Ruggedized Class 3 suit is certified to NFPA1994, Class 3R and NFPA 1992 Standards (2018 Edition). The suit’s ruggedized construction makes it ideal for extended CBRN responses that include tactical entry or search & rescue missions for several reasons.

First, the GORE® CHEMPAK® selective permeable fabric is engineered to deliver extremely durable protection against potential exposure to liquid and vapor chemicals, biological, and radiological particulates, blood and body fluids, and emerging pharmaceuticals such as fentanyl — even after exposure to field contaminants such as seawater, sweat, and hydraulic fluid.

Second, the form-fitting garment, with reinforced padding at critical stress points for a greater level of cut and puncture resistance, is designed to enable the responder to move more easily and effectively throughout hazardous surroundings, confined spaces, and rubble piles.

Third, the highly breathable GORE® CHEMPAK® selectively permeable fabric enables the responder to stay actively involved in the mission significantly longer than an impermeable suit does. While maintaining a minimum of four hours of permeation protection, Gore’s barrier enables sweat vapor to escape through the suit, which helps reduce heat stress.

And finally, the NFPA certifications and AEL/SEL qualifications of the Ruggedized Class 3 suit make it eligible for grant funding.

According to Jason Horowitz, Gore’s North American Chem-Bio product manager, their team works closely with end users to identify their needs when developing a new product. CBRN responders had described the challenges of needing protection in harsh surroundings combined with the capability of operating in temperature and humidity extremes. He explained, “The new garment needed to be durable enough to withstand rigorous use associated with tactical entry or search and rescue operations, providing a greater level of cut and puncture resistance than the current Class 3 ensembles. It also needed to provide increased visibility, range of motion, and dexterity, while optimizing the integration of helmets and ballistic vests. We’re really excited about offering this new level of durability in a certified Class 3R garment.”

Posted June 15, 2018

Source: W. L. Gore & Associates

Indorama Ventures To Support Manufacturing Revival In Egypt

BANGKOK, Thailand — June 15, 2018 — Indorama Ventures Public Co. Ltd. (IVL) announced that it has entered into a joint venture agreement with Dhunseri Petrochem Ltd. (Dhunseri) to acquire its Egyptian Indian Polyester Company S.A.E. (EIPET) Polyethlene Terephthalate (PET) facility located in Ain Sokhna free trade zone, North West of the Gulf of Suez in Egypt. This plant has a manufacturing capacity of 540,000 tonnes per annum. The transaction takes place with immediate effect. Restart activities for manufacturing recyclable PET has commenced and key raw material PTA will be shipped from IVL Portugal soon after restart of Portugal PTA production anticipated in early July 2018.

This joint venture between Dhunseri and IVL allows for an uninterrupted supply of recyclable PET, which promotes the development of the consumer beverage industry and increases demand for sustainable packaging. Indorama Ventures will bring its world class capability and supply chain economics to the JV in order to competitively serve customers growing needs of sustainable packaging in Egypt and in the region as a whole and will be one of the largest project in EMEA. IVL is one of the few integrated producer of PTA and PET in Europe-Middle East-Africa (EMEA) spanning Lithuania in the North East and Nigeria in West Africa. IVL is the largest producer in Turkey for recyclable PET and producer of PTA and PET in Rotterdam, The Netherlands and in the Iberian Peninsula.

IVL is focused on balancing market needs for recyclable PET packaging, which has faced unprecedented economic challenges over last several years leading to uncompetitive supplies and disruptions in recent times. The facility in Egypt will lead to easing supply concerns in North Africa and in the Common Market for Eastern and Southern Africa (COMESA) as well as the markets covered by the several Free Trade Agreements (FTA) which Egypt is a signatory to.

The EIPET plant is strategically located in Ain Sokhna free trade zone, Egypt, offering logistics advantage when sourcing feedstocks and delivering end products in key markets, domestically and internationally. This facility is one of the largest in the Middle East and Africa and is well-positioned to cater to the increasing packaging needs of customers in the region and elsewhere. The economic resurgence in the region is expected to further improve demand growth potential, which currently is at around 7 percent per annum. Both partners are confident about the reforms that President El-Sisi has brought about in Egypt and the JV is a step forward to fulfilling the commitment made to the Egyptian authorities over the past three years.

Dhunseri and Indorama Ventures have established a sound business rapport and support mechanism in India since 2016 and expects to achieve continued success in this follow up investment in Egypt. Indorama Ventures has successfully revived a PTA producer in Portugal following the previous owner’s bankruptcy and has recently taken on the revitalization of Brazil’s largest PET plant, which faced a serious financial crisis after its former parent went in liquidation. The revival of these businesses will support easing of reliable supplies by IVL to its customers and help grow sustainable packaging in markets worldwide.

The addition of EIPET will increase Indorama Ventures’ existing global PET capacity by 10 percent. This plant uses the same technology as deployed at the IVL Dhunseri facility in India, allowing the Company to leverage its proven operational expertise and track record of successful integration. This recently built facility will be among Indorama Ventures’ finest in terms of scale and competiveness, enabling the Company to maintain its position at the forefront of the industry and serving customer needs in every geography in a timely and reliable manner.

Indorama Ventures expects to be able to leverage on internal feedstock supply of Purified Terephthalic Acid from its manufacturing base in Asia and Iberian Peninsula as well as Isophthalic Acid from its facility in Spain, enabling it to utilize its assets more efficiently and ensure supply continuity to all its customers. In addition, this joint venture will also open up a new avenue for growth by providing immediate access to a large domestic market and duty-free access to North and East Africa through preferential trade agreements in the region. Additional volume can be exported, with duty-free privileges to key Western markets that currently face limited availability of supply.

Commenting on this joint venture, Aloke Lohia, Group CEO of Indorama Ventures said, “I am delighted to extend our strategic partnership with Dhunseri through this acquisition. EIPET is a good fit with Indorama Ventures’ strategy in the recyclable and sustainable PET business, where the Company aims to supplement its position and build scale in key markets. EIPET also marks Indorama Ventures’ maiden entry into Egypt, complementing our existing footprint in EMEA. EIPET will provide meaningful opportunities for feedstock integration from our existing assets while allowing us to serve our customers in growth markets of Egypt and in the region.”

C. K. Dhanuka, Executive Chairman of Dhunseri said, that “Our JV in India has been extremely smooth and provided a win-win situation for both, the customer and us. After experiencing the JV in India, we are very upbeat on entering the same in Egypt, which will be again a equal ownership JV.”

Posted June 15, 2018

Source: Indorama Ventures Public Company Limited

Strong Partnership That Benefits The Environment: JACK & JONES Counts On OrganIQ Of The CHT Group

TÜBINGEN, Germany  — May 18, 2018 — With its LOW IMPACT DENIM (LID) collection the JACK & JONES brand which belongs to the Danish company Bestseller sets now new standards in the field of environmentally friendly jeans manufacturing.

The CHT Group and its innovative organIQ technology is a fundamental part of this trendsetting LID collection. CHT contributes to it with its vast expertise in sustainable jeans finishing chemicals and processes, a crucial element of jeans manufacturing besides the selection of fibres and fabric manufacturing. As a holistic sustainable approach LID covers the complete manufacturing process. Energy and water savings as well as environmentally friendly bleaching, dyeing and washing methods make the LID concept of Jack & Jones a pioneer on the denim market.

“We are very proud that our organIQ products contributed to this great idea and strong collection“, says Thomas Aplas, head of the Technical Service Jeans & Garment at the CHT Group. “We are fond of such partnerships with innovative companies which have the same visions as we do. The energy and water savings in jeans washing speak for themselves just like the strong effects that are achieved with our environmentally friendly organIQ technology.“

In terms of ecology and economy organIQ is a trendsetting technology on the denim market. The product family is composed of the components organIQ BLEACH, organIQ NEUTRAL and organIQ BIOPOWER. The systems guarantees a modern and extremely efficient application at the highest ecological level. Manufacturers and the environment both benefit from the lowest water consumption and minimum effluent load. Treatments at room temperature additionally reduce the energy input. A nearly revolutionary fact is that the process completely works without pumice stones, potassium permanganate bleaches and chlorine bleaches as well as their neutralization.

Posted June 15, 2018

Source: CHT Group

Sleepypod Introduces Go Bag For Pet Parents

PASADENA, Calif. — June 15, 2018 — Sleepypod®, a Pasadena-based company known for redefining pet products, today introduces Sleepypod Go Bag. Sleepypod Go Bag is built for pet travel, but clever enough for human travel. It organizes pet and human travel essentials in a go anywhere bag.

“Pet travel is on the rise thanks to pet-friendly hotels, attractions, and workspaces,” says Michael Leung, Sleepypod co-founder and lead product designer. “Since pets rely upon their owners for everything from food to protection, getting to a destination is not without challenges.”

Leung believes Sleepypod Go Bag will appeal to on the go pet owners who are looking for a simple way to organize a trip with a pet.

“Adding a pet to the travel equation requires an extra element of organization,” Leung continues. “Traveling with a pet is not as easy as grabbing a leash before heading into a car or onto an airplane.

“The list of pet travel essentials becomes more complex and lengthy depending on the travel method and length of stay, so a good travel organizer can help make for a happier, hassle-free experience.

“When on the road with your pet, Sleepypod Go Bag makes it easier to find what you need and where you need it,” Leung concludes.

Sleepypod Go Bag’s tapered profile makes it comfortable for cross-body carrying, while the streamlined grab handle amplifies on-the-go convenience. Travel is made easier by two mini packing cubes and an insulated food pouch. Thoughtful features include gusseted side pockets for water bottles or cell phone, an exterior utility ring for hanging a leash or flashlight, exterior zippered pocket for easy access items, padded main compartment and an interior pocket for separating documents or cradling a tablet/computer, and an interior lanyard for attaching keys.

As with Sleepypod’s award-winning pet carriers, the exterior of the Sleepypod Go Bag and its packing components are made from heavy duty, luggage grade ballistic nylon.

Features

  • Padded main compartment;
  • Top zip with double zipper pulls;
  • Tapered profile for comfortable cross-body carrying;
  • Structured design with flat base for stability;
  • Streamlined grab handle;
  • Adjustable shoulder strap with comfort padding;
  • Single zipper front pocket for easy access items;
  • gusseted side pockets for items like beverage bottles or phone;
  • Utility ring for hanging items like a leash or flashlight; and
  • Easy clean exterior is made of luggage-grade, ballistic nylon.

Main compartment

  • 2 small pockets for smaller items;
  • 1 large padded pocket for essential documents, computer or tablet; and
  • Lanyard for hanging items like keys.

Included organizers

  • 2 padded, mini cubes in Glacier Silver color with double zipper pulls for organizing travel essentials;
  • 1 insulated food bag in Glacier Silver color; and
  • Easy clean exterior is made of luggage-grade, ballistic nylon.

Specifications

  • Go Bag main compartment – dimensions: 16 inches (tall) x 14 inches (wide) x 5 inches (deep);
  • Go Bag main compartment with side pockets extended – dimensions: 16 inches (tall) x 16 inches (wide) x 5 inches (deep);
  • Go Bag weight: 1.2 pounds;
  • Mini Cube – dimensions: 4.5 inches (tall) x 6.5 inches (wide) x 4.5 inches (deep);
  • Mini Cube weight: .25 pounds;
  • Insulated Food Bag – dimensions when fully open: 13 inches (tall) x 7 inches (wide) x 4.5 inches (deep);
  • Insulated Food Bag – dimensions when rolled close: 7 inches (tall) x 7 inches (wide) x 4.5 inches (deep); and
  • Insulated Food Bag – weight: .45 pounds.

Colors

  • Jet Black;
  • Glacier Silver;
  • Strawberry Red; and
  • Robin Egg Blue.

Availability

Retailers may begin ordering the Sleepypod Go Bag beginning June 26. Products will be available for consumer purchase on July 16.

Posted June 15, 2018

Source: Sleepypod

Black Diamond Equipment® Innovates With Leading Ingredient Brands And New Technologies For Spring 2019 Apparel Collection

SALT LAKE CITY, Utah — June 14, 2018 — Black Diamond Equipment®, a global innovator in climbing, skiing and mountain sports equipment, and Green Theme International (GTI), a revolutionary PFC-free durable water repellent (DWR) that permanently bonds finishes to fibers without using a single drop of water or release of any hazardous discharge, announced their partnership for Black Diamond Equipment’s spring 2019 apparel line.

“We are pleased that Black Diamond Equipment has selected Green Theme International to be the central component of its spring 2019 technical outerwear wind collection,” stated Brian La Plante, strategic marketing director at GTI. “GTI’s rigorous product development and focus on innovation align perfectly with Black Diamond’s. It is exciting to work with a company that continually aims to bring the most advanced technologies to market, which provide the ultimate in performance and style.”

GTI’s Breathable Water Protection technology incorporates an environmentally friendly PFC-free water-repellent finish that is superior in performance compared to any other C-6, C-8, or C-0 DWR. This performance is only exceeded by its durability, as the GTI technology is permanently hyper-fused to the individual fabric fibers, and there is no need to ever refresh the jacket with an additional spray or wash-in finish. This technology will debut in Black Diamond’s spring 2019 Distance Wind Shell and grow in future seasons to be implemented into Black Diamond’s proprietary BD.Dry™ ski, alpine and rainwear collections.

Black Diamond also announces The Woolmark Company as a long-term partner for its spring 2019 apparel collection and beyond. The Woolmark Company is a subsidiary of Australian Wool Innovation, a not-for-profit enterprise that conducts research, development and marketing along the worldwide supply chain for Australian wool on behalf of about 60,000 woolgrowers that help fund the company. It is taking an active role in educating the internal Black Diamond team and connecting the brand with wider wool supply chain and supporting business units on product innovation.

To be showcased in its’ sportswear category, Black Diamond’s Rhythm Tee features a breakthrough co-developed Nuyarn Merino wool fabric technology at a superlight 95g/meter – making it significantly lighter than other tee shirts, while increasing durability and performance at the same time. The Rhythm’s Nuyarn fabric also dries five times faster than standard Merino, while providing 35-percent more stretch making it an ultimate high output, breathable layer or trail running shirt. The Rhythm Tee is machine washable and is certified by the Responsible Wool Standard (RWS).

“Collaborating with such an iconic brand as Black Diamond and its core group of active users allows us to showcase the natural benefits of Merino wool including thermo-regulation, odor management and movement in the context of cutting edge design and innovation,” stated Stuart McCullough, managing director of The Woolmark Company. “The very nature of our relationship demonstrates the versatility of Merino wool and the vision of Black Diamond’s apparel design team.”

Another key component of Black Diamond’s spring 2019 apparel collection is the inclusion of BD.cool™. BD.cool is Black Diamond’s innovative mineral based in-fiber cooling technology, which reflects 71 percent of near-infrared rays and reduces the wearer’s temperature. Designed for climbers, mountain runners and professionals on the move, BD.cool will be incorporated in several of Black Diamond’s sportswear tops purposefully built for the outdoors.

Additionally for spring 2019, Black Diamond is collaborating with YKK on the world’s first YKK Super Lightweight Zipper. At 40-percent lighter than any other, the new zipper will shave valuable grams for FKT’s and ultra light missions and will be featured in the Black Diamond Deploy Wind Shell.  Using a proprietary 5 denier nylon fabric from Toray Japan and weighing in at only 48 grams, the Deploy Wind Shell will be among the lightest wind protection pieces on the marketplace supporting YKK’s company tagline “Little Parts. Big Difference.”

Lastly, with features designed for climbing, and style for everything else, Black Diamond announces the addition of its new Forged Denim. Black Diamond’s new Forged Denim for spring 2019 will use a combination of best-in-class materials, incorporating Cordura™ fibers in the fabric to achieve a durable, yet unbelievable light and stretchy fabric, with climbing specific features to create the world’s best climbing denim.

“Black Diamond’s athlete-employees live by the company ethos: Use – Design – Engineer – Build – Repeat. We are dedicated to relentless innovation and integrity, designing and engineering equipment that pushes limits and challenges conventions for our global community of users,” explains Trent Bush, Black Diamond’s vice-president of apparel. “BD’s apparel partnerships for S’19 help manifest this philosophy and will empower our customers to perform at their best.”

Black Diamond Equipment’s spring 2019 collection will be on display next week at OutDoor, June 17-20, in Friedrichshafen, Germany, and at booth #42081-UL at Outdoor Retailer Summer Market, July 23-26, in Denver.

Posted June 15, 2018

Source: Black Diamond Equipment™

Sonoco Implementing Price Increases For Paperboard Tubes And Cores

HARTSVILLE, S.C. — June 14, 2018 — Sonoco today announced it will increase prices for its paper-based tubes and cores by a minimum of 6 percent in the United States and Canada, effective with shipments beginning July 16, 2018.

“The price increase is necessary due to ongoing increases in uncoated recycled paperboard (URB), the largest input cost for tubes and cores. URB demand remains strong and the marketplace is extremely tight, with operating rates pushing 100 percent,” said Doug Schwartz, division vice president of sales and marketing. “In addition, the rising cost of transportation remains a headwind due to lack of capacity linked to recently imposed driver regulations. As a result, Sonoco will be implementing a new policy of selling certain large diameter tubes that have less space utilization yields at F.O.B. from our operations.”

Posted June 15, 2018

Source: Sonoco

OrderMyGear Hires Under Armour’s Matt Kaplan As Head Of Enterprise Sales

DALLAS — June 15, 2018 — OrderMyGear announced today that it has hired Matt Kaplan as the head of Enterprise Sales, a new position at the growing company. Kaplan comes to OrderMyGear from Under Armour, where he worked for 16 years in a variety of leadership roles, most recently as the director of Sales for Team Sports.

“Matt will help connect our growing network of team dealers to large opportunities that were difficult to access and scale prior to OrderMyGear,” said Kent McKeaigg, CEO of OrderMyGear. “He will work with brands and national leagues to bridge the opportunity gap in this fragmented landscape.”

With over 80 employees and growing quickly into its new space in the up-and-coming East Quarter in Downtown Dallas, OrderMyGear serves the sporting goods and custom apparel industries, simplifying group commerce through its technology platform and services. The platform — which handled nearly $190M in sales in 2017 — improves the experience for teams, groups, companies, and anyone buying custom apparel from team dealers, promotional product distributors, decorators, and brands.

“I’m truly thankful to join this passionate and entrepreneurial team at OrderMyGear,” said Kaplan. “Our dealers and brands need better solutions to deliver value at scale to national leagues and other large, multi-faceted organizations. We’re excited to tackle the challenges in this space.”

OrderMyGear recently raised $35 million in its latest round of investment.

Posted June 15, 2018

Source: OrderMyGear

Iconix Brand Group Announces Leadership Transition

NEW YORK CITY — June 15, 2018 —  Iconix Brand Group Inc. today announced that Peter Cuneo, executive chairman of the Board of Directors, will serve as interim CEO, effective immediately. John Haugh has resigned as CEO, president and a member of the board to pursue other opportunities, also effective immediately.

The board has retained an executive search firm to assist with the process to identify a permanent CEO.

Drew Cohen, Lead Independent director of the Iconix Board, said: “The Iconix Board regularly evaluates leadership to ensure that we have the right mix of skills and experience in place to drive growth and value creation for all of our stockholders. Iconix has made steady progress on a range of financial initiatives, including strengthening our balance sheet and addressing near-term debt obligations. As we continue to work diligently to build a platform for sustainable growth that fully capitalizes on the strength of our global brand portfolio, the board is committed to putting in place a strong leadership team that is able to successfully execute on these goals.

“We are fortunate to have someone of Peter’s caliber, with an extensive track record of revitalizing leading consumer brands and direct experience leading Iconix as Interim CEO from August 2015 to April 2016, to step in as Interim CEO while we identify a permanent successor. We are grateful to John for his service to Iconix during his years as CEO and for the contributions he has made in positioning the company for the future. We wish him well in his future endeavors,” Cohen continued.

Cuneo, said: “I am committed to helping Iconix as Interim CEO at this important time in the Company’s history. We are addressing the challenges facing the Company head on, and are moving forward with focus and a sense of urgency. I look forward to working closely with the Board and management team as we search for a permanent CEO and best position Iconix to deliver growth and stockholder value creation.”

About Peter Cuneo

Peter Cuneo is a recognized leader in business turnarounds. Since 1983, he has completed seven turnarounds of distressed branded businesses in the global media and consumer products sectors. From 1999 to 2009, Peter played a lead role in the turnaround of Marvel Entertainment Inc. (MVL). As president and CEO, he led Marvel, post-bankruptcy, to a prominent position in the entertainment industry. He then served as vice chairman of the board, providing active strategic leadership as Marvel continues to grow into one of the world’s leading entertainment brands. This culminated in its $4.4 billion sale to Disney at the end of 2009. Previously, Peter was president and CEO of Remington Products Co. He joined the company as it was near bankruptcy and, in less than four years, executed a successful turnaround of the business and facilitated its sale to private equity investors. Peter has also served as president of the Security Hardware Group of the Black & Decker Corp., president of Bristol-Myers Squibb Pharmaceutical Group in Canada and president of the Clairol Personal Care Division. Peter is currently the managing principal of Cuneo & Company LLC, a private investment and management company.

Peter currently sits on the Board of the Foundation for the National Archives in Washington, DC as Co-Head of the Development Committee. Peter served two tours as a Lieutenant in the U.S. Navy in the Vietnam War. He received his MBA from Harvard Business School and holds a Bachelor of Science in Glass Science (Ceramic Engineering) from Alfred University, where he has served on the Board of Trustees since 1990. Peter recently completed six years as Chairman of Alfred’s Board and was awarded an honorary doctorate degree in 2013.

Posted June 15, 2018

Source: Iconix Brand Group Inc.

NCTO Applauds Trump Administration 301 Tariffs: Calls To Include Textile And Apparel End Products In Future Actions

WASHINGTON — June 15, 2018 — The National Council of Textile Organizations (NCTO) praised the Trump administration’s announcement imposing Section 301 tariffs on China in response to China’s unfair trade practices related to the forced transfer of American technology and intellectual property. NCTO also called on the Trump administration to include finished textile and apparel products on any future lists of imports from China to be made subject to Section 301 tariffs.

“The Trump administration is to be commended for taking decisive action against China’s unfair trade practices.  Section 301 tariffs deter trade cheats,” said NCTO president & CEO Auggie Tantillo.

“As per our recommendation, NCTO is pleased that almost all textile machinery products were removed from the final list of tariff lines subject to immediate 301 duties because tariffs on textile machinery hinder the competitiveness of U.S. textile manufacturers,” Tantillo continued.

“While appreciative of today’s actions, NCTO is convinced that the Trump administration’s efforts to deter China’s unfair trade practices would be even more effective if textile and apparel end products from China were made subject to Section 301 tariffs,” Tantillo said as he referred to NCTO’s China 301 public comments filed on May 11.

Noting that the Trump administration proposed an additional list of Chinese products for Section 301 tariffs as part of today’s announcement, Tantillo concluded, “NCTO is pleased that some textile products are on the second list. It would have a greater deterring effect, however, if more textile and apparel end products were included. As such, NCTO looks forward to working closely with the Trump administration to refine it.”

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers.

  • U.S. employment in the textile supply chain was 550,500 in 2017.
  • The value of shipments for U.S. textiles and apparel was $77.9 billion in 2017.
  • U.S. exports of fiber, textiles and apparel were $28.6 billion in 2017.
  • Capital expenditures for textile and apparel production totaled $2.4 billion in 2016, the last year for which data is available.

Posted June 15, 2018

Source: National Council of Textile Organizations (NCTO)

1...1,3461,3471,348...2,522Page 1,347 of 2,522

Sponsors

Breaking News

Load more

Digital Issue

2025 Quarterly Issue Number II

View Latest Digital Issue

FEATURED ARTICLES

© Copyright 2017 Textile Industries Media Group, LLC.