TEMPE, Ariz. — August 1, 2022 — Economic activity in the manufacturing sector grew in July, with the overall economy achieving a 26th consecutive month of growth, say the nation’s supply executives in the latest Manufacturing ISM® Report On Business®.

The report was issued today by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Management® (ISM) Manufacturing Business Survey Committee:

“The July Manufacturing PMI® registered 52.8 percent, down 0.2 percentage point from the reading of 53 percent in June. This figure indicates expansion in the overall economy for the 26th month in a row after a contraction in April and May 2020. This is the lowest Manufacturing PMI figure since June 2020, when it registered 52.4 percent. The New Orders Index registered 48 percent, 1.2 percentage points lower than the 49.2 percent recorded in June. The Production Index reading of 53.5 percent is a 1.4-percentage point decrease compared to June’s figure of 54.9 percent. The Prices Index registered 60 percent, down 18.5 percentage points compared to the June figure of 78.5 percent; this is the index’s lowest reading since August 2020 (59.5 percent). The Backlog of Orders Index registered 51.3 percent, 1.9 percentage points below the June reading of 53.2 percent. The Employment Index contracted for a third straight month at 49.9 percent, 2.6 percentage points higher than the 47.3 percent recorded in June. The Supplier Deliveries Index reading of 55.2 percent is 2.1 percentage points lower than the June figure of 57.3 percent. The Inventories Index registered 57.3 percent, 1.3 percentage points higher than the June reading of 56 percent. The New Export Orders Index reading of 52.6 percent is up 1.9 percentage points compared to June’s figure of 50.7 percent. The Imports Index grew again in July, up 3.7 percentage points to 54.4 percent from 50.7 percent in June.”

Fiore continues, “The U.S. manufacturing sector continues expanding — though slightly less so in July — as new order rates continue to contract, supplier deliveries improve and prices soften to acceptable levels. According to Business Survey Committee respondents’ comments, companies continue to hire at strong rates, with few indications of layoffs, hiring freezes or headcount reduction through attrition. Panelists reported higher rates of quits, reversing June’s positive trend. Prices expansion eased dramatically in July, but instability in global energy markets continues. Sentiment remained optimistic regarding demand, with six positive growth comments for every cautious comment.

Panelists are now expressing concern about a softening in the economy, as new order rates contracted for the second month amid developing anxiety about excess inventory in the supply chain. Demand dropped, with the (1) New Orders Index contracting again, (2) Customers’ Inventories Index remaining at a low level but approaching 40 percent and (3) Backlog of Orders Index decreasing but still in growth territory. Consumption (measured by the Production and Employment indexes) was mixed during the period, with a combined positive 1.2-percentage point impact on the Manufacturing PMI® calculation. The Employment Index contracted for the third month in a row after expanding for eight straight months (September 2021 through April), but panelists again indicated month-over-month improvement in hiring ability in July. Challenges with turnover (quits and retirements) and resulting backfilling continue to plague efforts to adequately staff organizations. Inputs — expressed as supplier deliveries, inventories and imports — continued to constrain production expansion, but to a significantly lesser extent compared to June. The Supplier Deliveries Index indicated deliveries slowed at a slower rate in July, which was supported by an increase in the Inventories Index. The Imports Index continued to expand in July after one month of contraction preceded by six straight months of growth. The Prices Index increased for the 26th consecutive month, at a much slower rate compared to June.

“Four of the six biggest manufacturing industries — Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; and Machinery — registered moderate-to-strong growth in July.

“Manufacturing performed well for the 26th straight month. There are signs of new order rates softening — cited in 16 percent of general comments, compared to 17 percent in June — as panelists are increasingly concerned about excessive inventories and continuing record-high lead times. Employment activity remained strongly positive in spite of the uncertainty with new order rates,” says Fiore.

Eleven manufacturing industries reported growth in July, in the following order: Apparel, Leather & Allied Products; Nonmetallic Mineral Products; Petroleum & Coal Products; Printing & Related Support Activities; Computer & Electronic Products; Transportation Equipment; Machinery; Textile Mills; Primary Metals; Plastics & Rubber Products; and Electrical Equipment, Appliances & Components. The seven industries reporting contraction in July compared to June, in the following order are: Wood Products; Furniture & Related Products; Paper Products; Miscellaneous Manufacturing; Fabricated Metal Products; Food, Beverage & Tobacco Products; and Chemical Products.

What Respondents Are Saying

“Material extended lead times still affecting business, and the challenging labor market is a huge factor too. Backlog is healthy; we just cannot deliver to customers due to material issues.” [Computer & Electronic Products]

“Inflation is slowing down business. Overstock of raw materials due to prior supply chain issues and slowing orders.” [Chemical Products]

“Chip shortages remain; however, the COVID-19 lockdowns in China are presenting even worse supply issues.” [Transportation Equipment]

“Growing inflation is pushing a stronger narrative around pending recession concerns. Many customers appear to be pulling back on orders in an effort to reduce inventories.” [Food, Beverage & Tobacco Products]

“New order entry has slowed down slightly; however, logistical issues have yet to improve. Long lead times for materials and labor shortages are still a major problem.” [Machinery]

“Our markets are still holding up; however, I believe a slowdown is coming. We are cautious about going out too far with orders. Also, I believe the general market is in the beginnings of a recession.” [Fabricated Metal Products]

“All markets are extremely busy but face headwinds that will eventually take a toll. Lead times and costs make large projects very challenging to budget, plan and execute. Routine work is also very difficult.” [Nonmetallic Mineral Products]

“Current order books are full, but there have been signs of a slowdown beginning in the fourth quarter.” [Plastics & Rubber Products]

“Slight improvement projected for our business for the next quarter.” [Primary Metals]

“Continuing delivery and staffing issues have eaten away the bottom line.” [Textile Mills]

Manufacturing ISM® Report On Business® data is seasonally adjusted for the New Orders, Production, Employment and Inventories indexes.

*Number of months moving in current direction.

Commodities Reported Up/Down In Price And In Short Supply

Commodities Up in Price

Adhesives and Paint (8); Aluminum* (26); Caustic Soda (5); Corrugate (6); Corrugated Packaging (21); Crude Oil (3); Diesel Fuel* (19); Electrical Components (20); Electricity (2); Electronic Components (20); Freight (21); Labor — Temporary (15); Logistics Services; Maintenance, Repair and Operating (MRO) Supplies; Natural Gas* (13); Petroleum Based Products (3); Plastic Resins* (7); Polyethylene; Rubber Based Products (12); Solvents; and Steel Products* (23).

Commodities Down in Price

Aluminum* (3); Aluminum Products; Copper; Diesel Fuel*; Lumber (2); Natural Gas*; Plastic Resins* (2); Steel (3); Steel — Carbon; Steel — Hot Rolled (3); and Steel Products*.

Commodities in Short Supply

Adhesives and Paints; Aluminum; Electrical Components (22); Electronic Components (20); Hydraulic Components (3); Labor — Temporary (15); Plastic Resins (3); Resin Based Products; Rubber Based Products (2); Semiconductors (20); and Steel Products (4).

Note: The number of consecutive months the commodity is listed is indicated after each item.

*Indicates both up and down in price.

July 2022 Manufacturing Index Summaries

Manufacturing PMI®

The U.S. manufacturing sector grew in July, as the Manufacturing PMI registered 52.8 percent, 0.2 percentage point lower than the June reading of 53 percent. “The Manufacturing PMI continued to indicate sector expansion and U.S. economic growth in July. Three of the five subindexes that directly factor into the Manufacturing PMI (Production, Supplier Deliveries and Inventories) were in growth territory. Of the six biggest manufacturing industries, four — Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; and Machinery — registered moderate-to-strong growth in July. The Production Index decreased 1.4 percentage points but remained in expansion territory. The Supplier Deliveries Index slowed at a slower rate while the Inventories Index increased, indicating at least a slight easing of supply chain congestion. Eight of the 10 subindexes were positive for the period; a reading of ‘too low’ for the Customers’ Inventories Index is considered a positive for future production,” says Fiore. A reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally contracting.

A Manufacturing PMI above 48.7 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the July Manufacturing PMI indicates the overall economy grew in July for the 26th consecutive month following contraction in April and May 2020. “The past relationship between the Manufacturing PMI and the overall economy indicates that the Manufacturing PMI for July (52.8 percent) corresponds to a 1.4-percent increase in real gross domestic product (GDP) on an annualized basis,” says Fiore.

The Last 12 Months

New Orders

ISM’s New Orders Index dropped to 48 percent in July, a decrease of 1.2 percentage points compared to the 49.2 percent reported in June. This indicates that new order volumes contracted again after growing for 24 consecutive months. “Only one of the six largest manufacturing sectors — Computer & Electronic Products — increased new orders at a moderate level. Lead times remain at elevated levels, and fundamental raw material prices continue to persuade buyers to remain on the sidelines. Also contributing to order-placement pauses are concerns about future economic growth slowing and the impact to manufacturing inventories caused by additional order placements, which could impact working capital in the near-to-moderate term. Backlogs continued to sag due to the weakness in new orders,” says Fiore. A New Orders Index above 52.9 percent, over time, is generally consistent with an increase in the Census Bureau’s series on manufacturing orders (in constant 2000 dollars).

Of the 18 manufacturing industries, four reported growth in new orders in July: Nonmetallic Mineral Products; Printing & Related Support Activities; Primary Metals; and Computer & Electronic Products. Seven industries reported a decline in new orders in July, in the following order: Wood Products; Furniture & Related Products; Fabricated Metal Products; Miscellaneous Manufacturing; Plastics & Rubber Products; Chemical Products; and Machinery. Seven industries reported no change in new orders in July as compared to June.

Production

The Production Index registered 53.5 percent in July, 1.4 percentage points lower than the June reading of 54.9 percent, indicating growth for the 26th consecutive month. “Of the top six industries, three —Petroleum & Coal Products; Computer & Electronic Products; and Transportation Equipment — expanded in July. Materials availability continues to show signs of recovery, but factories are still struggling to hit optimum output rates, primarily due to high levels of employee turnover,” says Fiore. An index above 52.4 percent, over time, is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures.

Five industries reported growth in production during the month of July: Apparel, Leather & Allied Products; Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; and Plastics & Rubber Products. The six industries reporting a decrease in production in July — in the following order — are: Wood Products; Textile Mills; Miscellaneous Manufacturing; Fabricated Metal Products; Electrical Equipment, Appliances & Components; and Food, Beverage & Tobacco Products. Seven industries reported no change in production levels in July as compared to June.

Employment

ISM’s Employment Index registered 49.9 percent in July, 2.6 percentage points above the June reading of 47.3 percent. “The index contracted for the third straight month after an eight-month period of expansion. Of the six big manufacturing sectors, three (Transportation Equipment; Petroleum & Coal Products; and Machinery) expanded. Although an overwhelming majority of survey panelists again indicate their companies are hiring, they are still struggling to meet labor management plans. Improvement signs are mixed: A smaller share of comments (7 percent in July, down from 14 percent in June) noted greater hiring ease, and among respondents whose companies are hiring, 35 percent expressed difficulty in filling positions, down from 42 percent in June. Turnover rates remain elevated, with 39 percent of comments citing backfills and retirements, an increase from 29 percent in June. Employment levels, driven primarily by turnover, remain the top issue affecting production growth,” says Fiore. An Employment Index above 50.5 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.

Eight of 18 manufacturing industries reported employment growth in July, in the following order: Apparel, Leather & Allied Products; Nonmetallic Mineral Products; Printing & Related Support Activities; Transportation Equipment; Petroleum & Coal Products; Plastics & Rubber Products; Machinery; and Electrical Equipment, Appliances & Components. The six industries reporting a decrease in employment in July — in the following order — are: Textile Mills; Paper Products; Primary Metals; Miscellaneous Manufacturing; Food, Beverage & Tobacco Products; and Chemical Products.

Supplier Deliveries†

The delivery performance of suppliers to manufacturing organizations was slower in July, as the Supplier Deliveries Index registered 55.2 percent, 2.1 percentage points lower than the 57.3 percent reported in June. Of the top six manufacturing industries, five (Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; Machinery; and Chemical Products) reported slower deliveries. “This indicates the best supplier deliveries performance since July 2020, when the index registered 55.9 percent as business began to resurface after the initial pandemic lockdowns. Deliveries slowed at a slower rate compared to the previous month — 21.4 percent of panelists reported slower deliveries in July, compared to 27.4 percent in June. Panelists’ comments indicate that suppliers, despite their labor problems, performed better in July compared to previous months,” says Fiore. A reading below 50 percent indicates faster deliveries, while a reading above 50 percent indicates slower deliveries.

Ten of 18 manufacturing industries reported slower supplier deliveries in July, in the following order: Textile Mills; Paper Products; Nonmetallic Mineral Products; Primary Metals; Miscellaneous Manufacturing; Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; Machinery; and Chemical Products. Five industries reported faster supplier deliveries in July as compared to June: Wood Products; Electrical Equipment, Appliances & Components; Furniture & Related Products; Plastics & Rubber Products; and Fabricated Metal Products.

Inventories

The Inventories Index registered 57.3 percent in July, 1.3 percentage points higher than the 56 percent reported for June. “Manufacturing inventories expanded at a faster rate compared to June, registering their highest level since July 1984, when the index registered 57.8 percent. Of the six big manufacturing industries, five (Computer & Electronic Products; Petroleum & Coal Products; Machinery; Transportation Equipment; and Chemical Products) grew their inventories of manufacturing raw materials in July. Companies are showing the most concern about their inventory levels since the start of the pandemic in 2020, when a slowing of the manufacturing economy was anticipated,” says Fiore. An Inventories Index greater than 44.4 percent, over time, is generally consistent with expansion in the Bureau of Economic Analysis (BEA) figures on overall manufacturing inventories (in chained 2000 dollars).

Of 18 manufacturing industries, the 13 reporting higher inventories in July — in the following order — are: Apparel, Leather & Allied Products; Textile Mills; Computer & Electronic Products; Nonmetallic Mineral Products; Printing & Related Support Activities; Electrical Equipment, Appliances & Components; Wood Products; Petroleum & Coal Products; Machinery; Plastics & Rubber Products; Transportation Equipment; Fabricated Metal Products; and Chemical Products. The three industries reporting contracting inventories in July are: Paper Products; Primary Metals; and Food, Beverage & Tobacco Products.

Customers’ Inventories†


ISM’s Customers’ Inventories Index registered 39.5 percent in July, 4.3 percentage points higher than the 35.2 percent reported for June, indicating that customers’ inventory levels were considered too low. “Customers’ inventories are too low for the 70th consecutive month, a positive for future production growth, but customer inventory requirements are easing compared to previous months,” says Fiore.

Three industries (Wood Products; Food, Beverage & Tobacco Products; and Chemical Products) reported customers’ inventories as too high in July. The 12 industries reporting customers’ inventories as too low — listed in order — are: Nonmetallic Mineral Products; Transportation Equipment; Miscellaneous Manufacturing; Petroleum & Coal Products; Furniture & Related Products; Primary Metals; Plastics & Rubber Products; Computer & Electronic Products; Machinery; Paper Products; Fabricated Metal Products; and Electrical Equipment, Appliances & Components.

Prices† 

The ISM Prices Index registered 60 percent in July, 18.5 percentage points lower compared to the June reading of 78.5 percent, indicating raw materials prices increased for the 26th consecutive month, at a much slower rate. The Prices Index has been at or above 60 percent for 23 straight months. The month-over-month decline of 18.5 percentage points is the fourth biggest decline on record (since 1948) and the steepest since a 22.1-percentage point drop in June 2010. “The slowing in price increases is being driven by (1) volatility in the energy markets, (2) softening in the copper, steel, aluminum and corrugate markets and (3) a significant decrease in chemical demand. Notably, 21.5 percent of respondents reported paying lower prices in July, compared to 8.3 percent in June,” says Fiore. A Prices Index above 52.6 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) Producer Price Index for Intermediate Materials.

In July, 12 of 18 industries reported paying increased prices for raw materials, in the following order: Nonmetallic Mineral Products; Printing & Related Support Activities; Paper Products; Plastics & Rubber Products; Textile Mills; Computer & Electronic Products; Food, Beverage & Tobacco Products; Chemical Products; Miscellaneous Manufacturing; Machinery; Furniture & Related Products; and Transportation Equipment. The three industries reporting paying decreased prices for raw materials July are: Petroleum & Coal Products; Fabricated Metal Products; and Wood Products.

Backlog of Orders†


ISM’s Backlog of Orders Index registered 51.3 percent in July, a 1.9-percentage point decrease compared to the 53.2 percent reported in June, indicating order backlogs expanded for the 25th straight month. Of the six largest manufacturing sectors, three — Petroleum & Coal Products; Machinery; and Transportation Equipment — expanded their order backlogs. “Backlogs expanded in July at a slower rate, as new order levels remain low and panelists’ customers prepare for a slowing in general manufacturing activity. A slowing in price increases is a positive for future new orders growth and backlogs expansion,” says Fiore.

Five industries reported growth in order backlogs in July: Nonmetallic Mineral Products; Petroleum & Coal Products; Printing & Related Support Activities; Machinery; and Transportation Equipment. The seven industries reporting lower backlogs in July — in the following order — are: Furniture & Related Products; Wood Products; Fabricated Metal Products; Chemical Products; Primary Metals; Computer & Electronic Products; and Miscellaneous Manufacturing. Six industries reported no change in backlogs of orders in July as compared to June.

New Export Orders†

ISM’s New Export Orders Index registered 52.6 percent in July, 1.9 percentage points above the June reading of 50.7 percent. “The New Export Orders Index grew for the 25th consecutive month, at a faster rate in July. Gains were achieved in the month as the European economy stabilizes and China recovers from its recent COVID-19 lockdowns. Of the six big industry sectors, four — Petroleum & Coal Products; Food, Beverage & Tobacco Products; Transportation Equipment; and Computer & Electronic Products — expanded,” says Fiore.

The four industries reporting growth in new export orders in July are: Petroleum & Coal Products; Food, Beverage & Tobacco Products; Transportation Equipment; and Computer & Electronic Products. The six industries reporting a decrease in new export orders in July — in the following order — are: Wood Products; Paper Products; Plastics & Rubber Products; Electrical Equipment, Appliances & Components; Miscellaneous Manufacturing; and Chemical Products. Seven industries reported no change in exports in July as compared to June.

Imports†


ISM’s Imports Index registered 54.4 percent in July, an increase of 3.7 percentage points compared to June’s figure of 50.7 percent. “Imports grew in July; activity improved as Asia ports started to clear their backlogs. The index reached its highest level since February (55.4 percent),” says Fiore.

The 10 industries reporting growth in imports in July — in the following order — are: Textile Mills; Printing & Related Support Activities; Petroleum & Coal Products; Primary Metals; Electrical Equipment, Appliances & Components; Transportation Equipment; Computer & Electronic Products; Fabricated Metal Products; Plastics & Rubber Products; and Machinery. Three industries reported lower volumes of imports in July: Paper Products; Miscellaneous Manufacturing; and Chemical Products.

†The Supplier Deliveries, Customers’ Inventories, Prices, Backlog of Orders, New Export Orders, and Imports indexes do not meet the accepted criteria for seasonal adjustments.

Buying Policy

The average commitment lead time for Capital Expenditures in July was 183 days, a decrease of three days compared to June. Average lead time in July for Production Materials remained at its all-time high of 100 days. Average lead time for Maintenance, Repair and Operating (MRO) Supplies increased by seven days, to an all-time high of 51 days. (ISM® began tracking lead times data in 1987.)

Posted: August 1, 2022

Source: Institute for Supply Management

THE WOODLANDS, Texas — August 1, 2022 — Indorama Ventures Public Co. Ltd. (IVL), a global sustainable chemical company, has entered into a non-binding agreement with Capchem Technology USA Inc. (Capchem USA) to study the opportunity to build and operate a world-class lithium-ion battery solvents plant at one of IVL’s petrochemical facilities in the U.S. Gulf Coast. The proposed plant will supply the lithium-ion batteries industry in North America, which is boosted by significant growth in the development of electric vehicles (EV).

The proposed facility will produce ethylene carbonate and its chemical derivatives, which are essential components of the electrolytes solutions used in lithium-ion batteries. IVL’s Integrated Oxides and Derivatives (IOD) segment and Capchem USA, a subsidiary of Shenzhen Capchem Technology Co. Ltd., will study the proposal to develop and operate the plant. Capchem is a global leading company in lithium-ion battery chemicals. A new plant would significantly benefit the North American lithium-ion battery market, which currently depends on imports from Asia amid potential for accelerated growth in the EV industry.

Entering the lithium-ion battery market as a competitive new player reinforces IOD’s transition towards downstream specialty products, increasing IVL’s opportunities in attractive end-market applications. Under its Vision 2030 ambition, IVL is building on its global integrated petrochemicals model through investing in adjacent businesses that offer High Value Add (HVA) products which contribute to a more sustainable world.

The study will assess the opportunity to build a plant using Capchem’s established technology to produce ultra-pure ethylene carbonate, di-methyl carbonate, ethyl methyl carbonate, di-ethyl carbonate and derivatized electrolyte solutions. The study also includes an option to build a second module to meet expected growing market demand.

The key raw materials for the proposed new plant, namely purified ethylene oxide and carbon dioxide, will be supplied from IVL’s integrated supply network as part the company’s strategy to enhance end-market exposure, technologies, and downstream portfolio breadth. The sequestered carbon dioxide used in the process has a positive sustainability impact.

Alastair Port, executive president, Integrated Oxides and Derivatives (IOD), IVL, said: “IVL is constantly looking for ways to enhance our sustainability programs towards our vision of creating a more sustainable world. This mutual study with Capchem USA not only helps us to achieve that, but also supports the adoption of zero-emission electric mobility. Given our proven operational excellence, highly skilled workforce, world-class infrastructure, and access to captive raw materials, we believe we are well-placed to successfully implement the technology, which will help to reduce North American EV manufacturers’ reliance on imports.”

Posted: August 1, 2022

Source:  Indorama Ventures Public Company Limited (IVL)