Techtextil Delivers In Raleigh

TTNAreviewMesse Frankfurt’s odd-year technical textiles show drew record crowds to Raleigh, N.C.

TW Special Report

Techtextil North America’s odd-year trade show held recently in Raleigh, N.C., once again disproved the myth that size matters. The number of exhibitors was on the small side at 165, but the 3,185 visitors in attendance represented an increase of 52 percent over the Chicago event in 2017, and made the 2019 edition the highest attended odd-year show in its history.

One only had to look around the exhibit halls to see the large crowds — at times navigating the aisles or finding an empty seat in the dining and break areas was difficult because of the sheer volume of people gathered in groups clearly engaged in interesting conversations.

“The first hour of the show that I witnessed was phenomenal,” said Dennis Smith, president, show organizer Atlanta-based Messe Frankfurt Inc. “We want to create events that drive business discussions and from what I have seen so far, we are delivering on that.”

The overall satisfaction of the exhibitors backed up the positive numbers and show floor buzz.

Bill Christmann, vice president of sales, Gehring Textiles, commented that while the show floor was smaller than past events, the traffic and discussions were good. “If you come to a show with an open mind, it’s almost always a good show,” Christmann said. “We see suppliers, customers, old friends and new, and that combination along with the potential opportunities gained justifies us coming back again and again because we always seem to make new worthwhile connections.”

Lumat USA highlighted its ultra-high molecular weight polyethylene filament at the show. Lumat’s Manager of Sales Bart Krulic offered: “This is the best odd year Techtextil thus far. Everyone I’ve spoken with had nothing but positive things to say about the show.” Tony Webber, sales director, Adaptive Control, mentioned: “The show has been great for us. Lots of good conversations.”

The show floor provided the usual array of interesting offerings from exhibitors, once again displaying how vast and diverse the applications for technical textiles have become. Several of the symposium presentations, student posters and floor talks also provided further indication of new applications and opportunities still to come.

R&M International was a first-time exhibitor at Techtextil North America. “We are launching some new products – textured yarns, plied yarns and large denier yarns — and have had a lot of inquiries and met new customers, people we don’t normally do business with,” said Dominic Rawson, managing director. “The show has been great for us to showcase the new products.”

Collocated Open House

Hosting the show in Raleigh also provided the opportunity to attend an open house at North Carolina State University’s (NC State’s) Wilson College of Textiles to tour the various labs and meet the next generation of textile industry employees. The Nonwovens Institute (NWI), also housed on the NC State campus, was a highlight of the tour, showcasing its state-of-the-art equipment and capabilities, as well as demonstrating a refreshing philosophy that emphasizes working with industry partners to advance technology and applications. The NWI may not be well known to all, but for those companies in the know, it has certainly become a valued industry asset.

Future Events

Smith reported that launching the odd-year show has been an interesting journey, but “we know there is a demand for a technical textiles show in the United States annually.” Organizers were not yet ready to go public with the location for the next odd-year Techtextil North America, but Smith said it’s looking most likely to be a venue in the Southeast.

Techtextil North America returns to Atlanta for its flagship even-year edition May 12-14, 2020.

March/April 2019

Sewn Products: Hurdles & Opportunities

SPESAConfRoom
The room engaged in thoughtful discussion about issues facing the sewn products industry.

SPESA’s 9th Advancements in Manufacturing Technologies Conference attracted 90 industry leaders in Raleigh, N.C.

TW Special Report

The Sewn Products Equipment & Suppliers of the Americas (SPESA) recently collocated its 9th Advancements in Manufacturing Technologies Conference with Techtextil North America held at the Raleigh Convention Center in Raleigh, N.C. More than 90 registered attendees came together to discuss issues facing the sewn products industry. The conference focused on the current and future state of innovations in the sewn products industry related to microfactories, on-demand manufacturing, software connectivity and automation.

The day’s agenda was broken into three panel discussions. During each session, the featured panelists were given a few minutes to introduce themselves and their companies to attendees. Then, attendees were encouraged to ask questions to stimulate thoughtful discussion among everyone in attendance with the panel members contributing their own personal stories and expertise.

The three topics covered, and featured panel members for each discussion, were:

Microfactories & On-Demand Manufacturing —

  • Yoram Burg, president, EFI Optitex;
  • Leonard Marano, vice president, Gerber Technology; and
  • Michael Rabin, president, Morgan Tecnica America.

The Internet of Sewn Products & Industry 4.0 —

  • Mariano Amezcua, president, DAP America;
  • Roberto Mangual, CEO, Exenta;
  • Toni Lublin, communications and partnership manager, Lectra North America; and
  • Kirby Best, president and chairman, PAAT International.

Advancing Automation —

  • Rick Frye, director of engineering, Brother International;
  • Dr. Mike Fralix, president and CEO, [TC]2; and
  • Frank Henderson, CEO, Henderson Sewing Machine Co.

Dr. Fralix also served as moderator for each panel discussion.

Regardless of the topic of each panel discussion, one issue — workforce development and training — was the clear issue of concern for conference attendees. Demand from the industry for skilled operators, engineers and mechanics is clear, and SPESA understands it has an opportunity to play a role in building the next generation’s workforce.

Michael McDonald, SPESA president opened the event.
Michael McDonald, SPESA president opened the event.

“It was very exciting to see the energy in the room and watch as conversations evolved into constructive dialogue,” said Michael McDonald, SPESA president. “This was more than a professional development event. This was an opportunity to provide both speakers and attendees a platform to share and discuss insights about the changes impacting their day-to-day as it relates to technological advancements in manufacturing. Moving the industry ahead starts by understanding both the hurdles we face and the opportunities on the horizon.”

SPESA’s next event is its 2019 SPESA Executive Conference to be held in New Orleans October 29-30, 2019.

March/April 2019

Gap To Spin Off Old Navy

Gap Inc., San Francisco, has announced it will spin off Old Navy as a separate company creating two independent, publicly traded companies — Old Navy; and a yet-to-be-named company that will comprise Gap, Athleta, Banana Republic, Intermix and Hill City.

The separation allows each company to increase its focus and flexibility, align investments and incentives and optimize its cost structure to ensure profitable growth.

The as-of-yet unnamed company earns approximately $9 billion in annual revenue. Old Navy boasts approximately $8 billion in annual revenue and is one of the fastest-growing apparel brands in the United States, according to Gap.

The separation will give Old Navy the flexibility, focus and control necessary to increase customer access and continue to grow its market share.

Art Peck, Gap Inc.’s current president and CEO will maintain the same position with the new company after the split. Sonia Syngal, president and CEO of Old Navy also will maintain her leadership role.

“Following a comprehensive review by the Gap Inc. board of directors, it’s clear that Old Navy’s business model and customers have increasingly diverged from our specialty brands over time, and each company now requires a different strategy to thrive moving forward,” said Robert Fisher, Gap Inc.’s board chairman.

March/April 2019

Shima Seiki Releases Updated VR-knit.com App

Japan-based Shima Seiki Mfg. Ltd. recently updated its smart device app known as VR-knit.com. The app was designed to showcase Shima Seiki’s original knit collection as 3D images in virtual space. Designs can be viewed and rotated 360°, and using virtual reality (VR) goggles, can be seen in 3D.

New features on the app include an augmented reality (AR) mode — which allows a virtual model sporting Shima Seiki original knitwear to be viewed within the user’s actual surroundings for a real-world presentation of the design — and an ultra-realistic fabric viewer, which allows a user to view virtual samples in full detail. The free-of-charge app is available for iOS and Android devices as well as Macintosh and Windows personal computers.

March/April 2019

Full-Scale Production For Archroma’s Denisol® Pure Indigo

Switzerland-based Archroma reports as a result of the high demand, it will begin full-scale production of its aniline-free Denisol® Pure Indigo — so called because aniline levels are below the limits of detection —  sooner than planned. Denisol Pure Indigo 30 liquid offers manufacturers a sustainable option for traditional indigo-colored denim.

“Denisol Pure Indigo is result of our efforts to challenge accepted technologies in order to find a better way to advance sustainability, and it is therefore extremely exciting to see that brands, retailers and manufacturers are eager to offer a more sustainable denim to consumers,” said Alexander Wessels, Archroma CEO. “We owe the successful launch of Denisol Pure Indigo to the shared vision of the textile value chain to preserve our planet and its people, after all — it’s our nature.”

March/April 2019

GIS Introduces HMB-FD-HV Driver

England-based Global InkjetSystems (GIS) has introduced the GIS Head Management Board (HMB-FD-HV), a new advanced solution for driving a variety of

Fujifilm Dimatix printheads including the Polaris, Sapphire, Emerald, Nova, Galaxy and S-Class, as well as the new Starfire. One board can drive up to 4 Fujifilm Dimatix Starfire SG600 or 4 Starfire SG1024 printheads. According to the company, the new board supports the full binary and greyscale capabilities of the printheads with multi-level waveforms, meniscus activation and jet straightening control. The GIS Atlas® user interface and Atlas Machine Control Services software are compatible with the HMB-FD-HV.

“We are able not only to support the new SG600, but also to offer an upgraded solution to users of other well-established Fujifilm printheads,” said Debbie Thorp, business development director.

March/April 2019

Techtextil 2019 Exhibitor Preview: Kelheim Fibres

KELHEIM, Germany — March 25, 2019 — High-performance insulation materials, disinfectant wipes and supply chain transparency — viscose fiber manufacturer Kelheim Fibres will present solutions for these and more topics at this year’s Techtextil.

With dry short cut viscose fibers, Kelheim Fibres contributes to energy saving: Fibers with an extremely fine titre are processed along with pyrogenic silica to vacuum insulation panels (VIPs). With their specific properties, Viscose fibers contribute reinforcement and allow for permanent dimensional stability.

Vacuum insulation panels offer the same insulation effect as rock wool with only one tenth the thickness. Such panels are used for example in refrigerators and freezers, as well as in building insulation. Transport logistics that demands an uninterrupted cold chain is another promising future market for these specialty fibers.

Fresh from Kelheim’s R&D laboratory comes the new viscose specialty fiber, Danufil® QR. It is specifically designed for use in disinfectant wipes. While standard viscose fibers, due to their negative ionic charge, bind up to 80 percent of “quats” (quarternary ammonium compounds, a common disinfectant) and so hinder their actual purpose, the positively charged Danufil QR fiber can reduce this undesired effect to less than 10 percent.

Softness, excellent fluid management and full biodegradability are the typical properties of viscose fibers — with the use of Danufil QR, disinfectant wipes can now also benefit from these.

Supply chain transparency and protection against forgery is another topic addressed by the viscose fiber experts: A marker fiber enables the — invisible for the human eye, but definite and even customer-specific — coding of products. So, the traceability of a product can be guaranteed, and customers and manufacturers can be protected from possible economic damages by plagiarism.

Alongside these new fibers, Kelheim will showcase many well-known specialty fibers as well as a range of new development projects.

That, according to Matthew North, commercial director at Kelheim Fibres, demonstrates the optimistic and future-oriented atmosphere at Kelheim: After a fire in their production plant in October 2018, the Bavarian viscose fiber specialists are gradually rebuilding their production capacity.

Currently five lines are working, which is the equivalent of about 50 percent of Kelheim’s former production capacity. The rebuilding process is expected to be completed by the middle of 2020.

“Until then, we concentrate all available resources on the creation of innovative new fibers and the development of new application areas so that we will restart with new state-of-the-art production lines, combined with more than 80 years of experience in viscose fiber production and numerous fibre innovations,” says Matthew North. “Coming back stronger‘ will be our motto for 2019.”

Meet the Kelheim Fibres team at Techtextil, Hall 3.1 Stand F23!

Posted March 25, 2019

Source: Kelheim Fibres GmbH


Ifo Says That Germany’s Business Leaders Are Regaining Optimism

BERLIN, Germany — March 25, 2019 — Munich’s Ifo Institute for Economic Research reports that its business climate index rose in March 2019, reversing a six-month trend. The seasonally adjusted index went up from 98.7 to 99.6 points, as managers felt more confident about their prospects for the coming six months.

Driving the uptick was increased optimism in the already positive service sector. But views of the current business climate also improved in construction, which enjoyed record volume in January, and trade leaders, too, said that their business was developing nicely.

“The latest Ifo survey shows that amidst the many recent reports of doom and gloom, German businesspeople actually remain quite confident about the future,” said Dr. Robert Hermann, CEO of Germany’s federal economic development agency Germany Trade & Invest (GTAI). “The German economy is very robust and resistant to worries about an economic downturn.”

Germany Trade & Invest is the foreign trade and inward investment agency of the Federal Republic of Germany. The organization advises foreign companies looking to expand their business activities in the German market. It provides information on foreign trade to German companies that seek to enter into foreign markets. All inquiries relating to Germany as a business and investment location are treated confidentially. All investment services are available at no charge.

Posted March 25, 2019

Source: Germany Trade & Invest (GTAI)

CONTACT Software Becomes Partner Of Smart Electronic Factory

BREMEN, Germany — March 25, 2019 — CONTACT Software is a new partner of the Smart Electronic Factory initiative. In this network, renowned companies and research institutes develop solutions for Industry 4.0 and test them in a real electronics factory.

The SEF Smart Electronic Factory initiative develops sample solutions for Industry 4.0. The members of the non-profit association design new applications for intelligently networked production and validate them under real conditions. The practical tests are running in the electronics factory of Limtronik GmbH and at Lenze SE.

Contact Software is now contributing its expertise in digital twin, industrial analytics and product lifecycle management (PLM). “The Smart Electronic Factory offers ideal conditions for closed-loop engineering,” said Ian Altmann, project engineer in Contact’s Engineering Transformation Team. “Smart systems generate a lot of data that enables companies to draw concrete conclusions about product improvements.”

With the Smart Electronic Factory, AWS, Dürr, Limtronik, Lenze, Bosch Rexroth and many other partners have built up a networked machine park in which standards and solutions for Industry 4.0 are created. Contact Software will use this environment to enable a continuous innovation process based on its Elements platform. The Digital Twin Dashboard is the pivotal point for users. It combines all data of a plant or machine and is the starting point for performance and product improvements through visual analysis of the relevant operating parameters.

Interested companies can inform themselves about SEF in the test factories or at the Hannover Messe 2019 (hall 7, booth D26) and be supported by the SEF’s members in their own digitization projects.

Posted March 25, 2019

Source: CONTACT Software

BASF’s Colors And Effects® Brand And The Pantone Color Institute™ Complete Color Of The Year 2019 Conference World Tour

LUDWIGSHAFEN, Germany — March 25, 2019 — With a joint presentation on March 28, BASF’s Colors and Effects® Brand and the Pantone Color Institute™ will complete their joint tour for the Color of the Year 2019 collaboration at SPE, the Society of Plastics and Engineers European Additives and Color Conference, in Frankfurt, Germany. In a series of presentations in North America, Asia, and Europe, BASF and Pantone are highlighting a collection of plastic designs inspired by the Pantone Color of the Year 2019, PANTONE 16-1546 Living Coral. Supporting performance as well as aesthetic appearance, the collection features a selection of Colors & Effects pigments that accentuate color, finish and design all while meeting versatile industry requirements.

At SPE, Marc Dumont, head of Industry Management Pigments, BASF, and Carola Seybold, Director Business Development EMEA for Pantone and X-Rite, will jointly present the realization of Pantone Living Coral in plastic designs. While Pantone explains the key influences on and messages and meanings related to its Color of the Year 2019, BASF details how to realize the shade in various resins and finishes in plastic designs.

“The Pantone Color of the Year is a color that can communicate the color message that best reflects what is happening in our global culture at a specific moment in time, a color that we see crossing all areas of design and serves as an expression of a mood or attitude,” said Carola Seybold. “Through these conferences in partnership with BASF, we seek to highlight how color appeals to and influences consumer behaviors and the importance of color choices in design.”

“Our shade collection brings Pantone Living Coral to life with pigments that perform safely, reliably and brilliantly,” said Marc Dumont. “Inspired by a globally recognized color and meeting global industry requirements, our collaborative campaign ‘Performance beyond dazzling impressions’ has been well received in each region.” Earlier this year, the collaborative campaign was presented at AMI Thermoplastic Concentrates on January 30 in Coral Springs, USA, and at the AMI Masterbatch Conference on March 14 in Bangkok, Thailand.

Posted March 25, 2019

Source: BASF

Sponsors