The 2022 Marcus Wallenberg Prize: Sustainable Concept For Wood-Based Textile Fibres

FALUN, Sweden — April 7, 2022 — The 2022 Marcus Wallenberg Prize is awarded to Professor Ilkka Kilpeläinen and Professor Herbert Sixta for the development and use of novel ionic liquids to process wood biomass into high-performance textile fibers.

The future demand for textile fibers is growing due to global population growth. Production of cotton, the predominantly used cellulose fiber for textiles, is not expected to keep up with the demand. Therefore, man-made cellulose fibers would be an excellent complement for cotton as these fibers have similar properties.

The main processes to produce man-made cellulose textile fibers are the viscose process, where cellulose is solubilized using alkali and carbon disulphide and the lyocell process, where N-methylmorpholine-N-oxide (NMMO) is used to dissolve cellulose. The viscose process has, however, become environmentally controversial due to the use of toxic carbon disulphide as the main reagent. The lyocell process on the other hand is hampered by the instability of the NMMO.

These challenges have led to extensive research on different solvent systems for cellulose to produce regenerated cellulose fibers. Ionic liquids have gained interest as green alternatives for organic solvents in different processes. Ionic liquids are salts that can be melted below 100°C and have unique properties including low vapor pressure, high thermal stability, and high dissolving capability of different organic and inorganic substances.

Man-made cellulose fibers from wood with high technical quality have been developed by two research teams in Finland, at the University of Helsinki and at the Aalto University. In this concept, the design and use of novel superbase ionic liquids to process wood pulp into high-performance textile fibers was developed and currently tested for scaling-up. The team led by Prof. Kilpeläinen at the University of Helsinki developed superbase ionic liquid solvents for dissolution of wood biomass e.g. bleached or unbleached pulp or recycled cellulose pulp. Prof. Sixta and his team, at the Aalto University, developed the ionic liquid-based fiber shaping process based on dry-jet wet spinning.

“This unique collaboration has resulted in novel sustainable concept of textile fiber production from wood. The innovation is expected to result in a large range of new product and business opportunities for the forest industry”, says Johanna Buchert, chairperson of the Marcus Wallenberg Prize Selection Committee.

The Marcus Wallenberg Prize 2022 will be presented by HM the King of Sweden to Professor Ilkka Kilpeläinen and Professor Herbert Sixta at a ceremony in Stockholm in October this year.

Key facts about the Prize winners

Professor Ilkka Kilpeläinen, was born in 1963 in Finland. He received his PhD in Organic Chemistry in 1993 at the University of Helsinki. In 1995 he was appointed docent degree in organic chemistry at the University of Helsinki and in 2003 in structural chemistry at the University of Oulu in Finland. Kilpeläinen was professor in chemistry at the University of Oulu, Finland, during the period between 2001 and 2003. Since 2003 he has been professor of organic chemistry at the University of Helsinki. Kilpeläinen is also Chairman of the board for Liuotin Group Oy, a development spin-off dedicated to scale-up ionic liquid production.

Professor Herbert Sixta, was born in 1954 in Austria. He has a PhD in Physical Chemistry from the University of Innsbruck in 1982 and Habilitation at Graz University of Technology in 1995 in Wood, Pulp and Fiber technology. He has been professor at the Aalto University since 2007 and was the head of the Department of Bioproducts and Biosystems. Sixta has had a long industrial career at Lenzing AG Austria, focused on the development of industrial regenerated cellulose fibres and their processing.

Posted: April 7, 2021

Source: Marcus Wallenberg Foundation

EFI Reggiani Celebrates 75 Years Of Innovative Solutions For The Textile World

BERGAMO, Italy — April 7, 2022 — Last June, EFI™ Reggiani celebrated 75 years of heritage, innovation and glamour in the textile world. As part of its anniversary celebration, the textile technology innovator is revealing the imminent launch of three new, state-of-the-art digital textile printers.

With three quarters of a century of innovation, research and technological excellence, EFI Reggiani has become the trusted partner for integrated, scalable solutions for the entire textile process — from yarn treatment to fabric printing and finishing. EFI Reggiani has always had its customers in the forefront, enabling their business’ success and growth.

“Textile has been in our DNA since the beginning,” said EFI Reggiani Senior Vice President and General Manager Adele Genoni. “We are always moving to the next level, thinking ahead and developing high-tech, quality and reliable products as well as new textile industry solutions and processes. We are proud of achieving this 75 years of innovation milestone.

“We are also pleased to be a part of the success of so many global textile manufacturers and apparel brands over the past seven decades and into the future,” she added. “We have very close relationships with our customers, and the collaboration we have together allow us to develop groundbreaking new technologies. The three new printers we are launching this year speak to the legacy and expertise for solutions that have made our technologies a benchmark of productivity and quality ever since the creation of the first Reggiani textile printer in 1946.”

Transforming the textile industry with innovation

Always striving to be at the cutting edge of technology, EFI Reggiani delivers world-class products offering boosted uptime and reliability, high performance throughput, unparalleled printing uniformity, and accuracy — all while helping customers increase the sustainability of their textile manufacturing activities.

From the creation of its first traditional printer to its latest technological innovations, EFI Reggiani’s tradition and dedication to its products have contributed to the global transformation of the textile market. EFI Reggiani solutions are used in high-quality, highly productive operations in all of the world’s major textile manufacturing centres. New EFI Reggiani innovations also help facilitate the spread and localisation of industrial textile manufacturing closer to end users in new geographic markets.

75 years of history and excellence

Reggiani Tessile — which was one of the largest fabric manufacturing companies in Italy — created the company to meet its needs in machinery development. Then known as Reggiani Macchine, the company grew tremendously over five decades thanks to continuous product innovation and close customer relationships.

Reggiani Macchine started a new chapter in the early 2000s with the introduction of digital printing technology to their product range. Then, in 2015, Reggiani Macchine joined the Electronics For Imaging family. Since then, the company, based in Bergamo, Italy, has accelerated its mission in driving the transformation of analogue to digital imaging in the textile segment. EFI Reggiani’s product portfolio has continued to expand, ranging from rotary and flatbed printing machines to scanning/multi-pass digital printers to the world’s fastest digital textile printer — the award-winning EFI Reggiani BOLT single-pass inkjet printer launched in 2018. The company has also substantially advanced its ink offerings, becoming a recognised leader as one of the only manufacturers of a full range of inks used in industrial textile manufacturing.

Driving customer success for the future

Today, EFI Reggiani’s leadership in innovation is the result of extensive research targeted at improving productivity and quality, optimising the textile manufacturing process, and reducing energy use, water consumption and overall environmental impact.

While the COVID pandemic made 2020 a difficult year for all involved in textile printing, EFI Reggiani took the opportunity to further strengthen its research and development activities — all to ensure that its customers have the right solutions as the market recovers.

Genoni believes productivity is key to any solution that will help customers recover and thrive post-pandemic, and one of the company’s new launches will specifically target a noticeable gap in the market.

“We want to help support our customers in their digital transformation,” she said. “One of our three new printers is going to target the industrial high-speed segment of the multi-pass textile printing sector. The new printer will not only be the fastest multi-pass printer that EFI Reggiani has ever developed, but we are also expecting it to be the fastest of its kind in the market.”

In the growing industrial, entry-level segment of the market, EFI Reggiani is strengthening its multi-pass offering by introducing two new scanning machines, which will help facilitate customers’ needs to manufacture closer to the end consumer. The pair of scanning printers EFI Reggiani is bringing to market in 2021 will enable new customers to take their first steps in industrial textile digital printing. The new printers will not only be easy to use, but, as with all of the company’s solutions, they will also give customers access to the best technology platforms and innovation for digital industrial printing with EFI Reggiani’s renowned quality and reliability.

Posted: April 7, 2021

Source: EFI™ Reggiani

Durst Group And Four Pees Agree Partnership For Integration Of Durst Software & Solutions Products

BRIXEN, Italy — April 7, 2022 — Durst Group, manufacturer of advanced digital printing and production technologies, has selected Four Pees as a key integration partner for the Durst Software & Solutions division. In this position, Four Pees will assist Durst to implement its Pixel to Output strategy and integrate its software solutions such as Durst Workflow or Durst Smart Shop at its clients.

Durst Group founded the Durst Software & Solutions division in 2019 with a team of over 60 people to provide intelligent and straightforward software solutions to streamline the complete print process. They consist of Durst LIFT ERP, a cloud-based ERP/MIS system, Durst Smart Shop, a comprehensive premium e-commerce solution for customizable print products, and Durst Workflow, a high-end solution for fully automated management of prepress and production tasks. The solutions are tailored for digital printing and offer a 360-degree approach for optimizing printing processes in a mixed-vendor production environment.

Michael Deflorian, business unit manager at Durst Software & Solutions, said: “Durst is known for quality, both in hardware and now with Durst Software & Solutions in the area of print automation software. We wanted to serve our customers even better in consultancy and integration and make our product portfolio easily accessible. We started looking for an experienced integration partner in Europe, and Four Pees quickly appeared on our radar. They have their finger on the pulse of the global printing industry and a proven track record in delivering complex automation projects. When we started talking to each other, we found that we were very complementary to each other in the way we work.”

Tom Peire, CEO at Four Pees, said: “For nearly fifteen years now, we have helped automate print-process around the world at big and small companies. With an increased focus on integration services and an expanded team, this new partnership with the Durst Software & Solutions division is the next step in our growth story. Its vision from pixel to output perfectly aligns with our vision of implementing automation from A to Z. We look forward to working with the different regional Durst teams to help printing companies get the best out of their print production.”

To dive deeper into this, Four Pees will be organizing a Four Pees Café on their new partnership and Durst’s 360 approach to print automation on 05/05/2022. Go to:  https://www.fourpees.com/en/events/2022/05/four-pees-cafe-durst-introduction to register for this webinar.

Posted: April 7, 2021

Source: Durst Group

NRF: U.S. Ports Seeing Brief Slowdown From Last Year But Imports Remain High

WASHINGTON — April 7, 2022 — The nation’s major retail container ports have begun to catch up with the backlog of cargo seen over the past several months, but could experience another surge this summer, according to the monthly Global Port Tracker report released today by the National Retail Federation and Hackett Associates.

“As we entered 2022, the biggest question was when the supply chain would return to normal,” NRF Vice President for Supply Chain and Customs Policy Jonathan Gold said. “Unfortunately, we still don’t have a definitive answer. Congestion at West Coast ports has eased, but congestion at some East Coast ports is growing. Ports aren’t as overwhelmed as they were a year ago, but they are still significantly busy moving near-record volumes of cargo.”

U.S. ports covered by Global Port Tracker handled 2.11 million Twenty-Foot Equivalent Units — one 20-foot container or its equivalent — in February, the latest month for which final numbers are available. That was down 2.3 percent from January but up 13 percent year-over-year.

Hackett Associates Founder Ben Hackett said volumes remained high in February despite factories in parts of Asia closing for the Lunar New Year holiday because U.S. ports were able to handle cargo from ships already waiting for a berth.

“With West Coast ports still congested, there were still plenty of containers to be unloaded,” Hackett said. Similarly, the current near-shutdown of Shanghai because of COVID-19 precautions means fewer ships are leaving China and “the wait on that side of the Pacific will help reduce the pressure of vessel arrivals at Los Angeles-area terminals.” An influx of vessel arrivals following the resumption of normal operations in China could result in renewed congestion at U.S. ports, however.

Ports have not yet reported March numbers, but Global Port Tracker projected the month at 2.27 million TEU, unchanged from the same month last year. April is forecast at 2.13 million TEU, down 1.1 percent from last year, and May at 2.21 million TEU, down 5.3 percent year-over-year. Increases are expected to resume in June, which is forecast at 2.26 million TEU, up 5.2 percent year-over-year. July is forecast at 2.32 million TEU, up 5.6 percent, and August at 2.35 million TEU, a 3.3 percent year-over-year increase that would set a new record for the number of containers imported in a single month since NRF began tracking imports in 2002. The current record is 2.33 million TEU in May 2021.

The first six months of 2022 are expected to total 13.1 million TEU, up 2.5 percent year-over-year. Imports for all of 2021 totaled 25.8 million TEU, a 17.4 percent increase over 2020’s previous annual record of 22 million TEU.

How to build a stronger and more sustainable supply chain will be addressed as retailers, industry experts and technology innovators meet at the NRF Supply Chain 360 conference in Cleveland in June.

Global Port Tracker, which is produced for NRF by Hackett Associates, provides historical data and forecasts for the U.S. ports of Los Angeles/Long Beach, Oakland, Seattle and Tacoma on the West Coast; New York/New Jersey, Port of Virginia, Charleston, Savannah, Port Everglades, Miami and Jacksonville on the East Coast, and Houston on the Gulf Coast. The report is free to NRF retail members, and subscription information is available at NRF.com/PortTracker

Posted: April 7, 2021

Source: The National Retail Federation (NRF)

Rieter Annual General Meeting 2022: All Motions Approved

WINTERTHUR, Switzerland — April 7, 2022 — The coronavirus also had an impact on the 131st Annual General Meeting of Rieter Holding Ltd., Winterthur, Switzerland, on Thursday, April 7, 2022.

Based on Article 27 of Regulation 3 on measures to combat the coronavirus (COVID-19), the board of directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 7, 2022, the independent proxy represented a total of 1 986 shareholders who hold 64.4 percent of the share capital.

The shareholders approved the proposal of the board of directors to distribute a dividend of 4.00 Swiss francs per share. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the board of directors and of the Group Executive Committee for fiscal year 2023.

Chairman of the Board Bernhard Jucker, and the members of the board of directors Hans-Peter Schwald, Peter Spuhler, Roger Baillod and Carl Illi, were confirmed for an additional one-year term of office. Sarah Kreienbühl and Daniel Grieder were newly elected to the board of directors for a one-year term of office.

Furthermore, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office. Sarah Kreienbühl was newly elected to the Remuneration Committee and is taking over the chair.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2021, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

Posted: April 7, 2021

Source: Rieter Holding Ltd.

Applied Composites, A Portfolio Company Of AE Industrial Partners, Acquires North Coast Composites And North Coast Tool & Mold From Unitech

LAKE FOREST, Calif. — April 5, 2022 — Applied Composites Holdings LLC — an aerospace, space and defense composites supplier — announced today that it has acquired The companies of North Coast LLC, a manufacturer of Resin Transfer Molded (RTM) composite structures and tooling, from Unitech Holdings Inc. (Unitech). Terms of the transaction were not disclosed.

This marks the sixth acquisition by the Applied Composites platform created by AE Industrial Partners LP (AEI), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets.

North Coast consists of North Coast Composites and North Coast Tool & Mold, Unitech divisions located in the same facility in Cleveland, Ohio. North Coast Composites is a manufacturer of advanced composites for aerospace production through state-of-the-art fabrication of RTM and Vacuum-Assisted Resin Transfer Molded (VARTM) components. North Coast Tool & Mold Corp. is a designer and manufacturer of quality molds and tools for the aerospace industry and a provider of a wide range of innovative manufacturing solutions. With a reputation for stellar customer service, North Coast counts many of the world’s leading aerospace and defense OEMs as customers.

“We are excited for North Coast to become a part of Applied Composites,” said David Horner, CEO of Applied Composites. “North Coast’s best-in-class RTM and tooling capabilities are important to Applied Composites and help to reinforce our leadership position in advanced composite solutions throughout our core aerospace, defense and space markets.”

“We have been strategically focused on building a complementary set of capabilities able to deliver a one-stop set of composite solutions to our customers,” said Jon Nemo, senior partner at AEI. “North Coast and RTM are strategic additions to Applied Composites and our ability to serve our growing list of OEM partners.”

Kirkland & Ellis served as legal advisor and RSM served as financial advisor to Applied Composites. Vedder Price P.C. was the legal advisor and Moelis was the financial advisor to Unitech.

Posted: April 6, 2021

Source: Applied Composites; AE Industrial Partners

CIT Arranges Financing For Noted Fashion Brand Kenneth Cole Productions Inc.

NEW YORK CITY — April 5, 2022 — CIT, a division of First Citizens Bank, today announced that its Asset-Based Lending business served as lead arranger on financing for men’s and women’s fashion brand Kenneth Cole Productions Inc.

Headquartered in New York City and founded in 1982, Kenneth Cole Productions is known worldwide for its fashion products spanning the footwear, handbag, apparel and fragrance categories. This new financing — arranged by CIT with participation from WhiteHawk Capital Partners — will be used by the company to refinance existing debt and support future growth opportunities.

“With the global pandemic receding, Kenneth Cole Productions is well positioned for growth due to the continuing strength of consumer spending and demand for branded products,” said Andrew Stokoe, CFO at Kenneth Cole Productions. “We appreciate CIT’s expertise in arranging this financing that will help us achieve our strategic business objectives.”

“Kenneth Cole is an internationally recognized brand with strong performance and potential across a number of product categories,” said Chris Esposito, managing director and group head for CIT’s Asset Based Lending business. “We were pleased to assist them in arranging this financing.”

CIT’s Asset-Based Lending business meets clients’ working capital needs by offering innovative structures that reduce funding costs and lower operational risks while improving earnings by leveraging accounts receivable, inventory or fixed assets as collateral.

Posted: April 6, 2021

Source: CIT, a division of First Citizens Bank

BastCore Partners With Texas Tech University To Bring Closed Loop Green Chemistry Solutions To Market

MONTGOMERY, Ala. — April 6, 2022 — BastCore has partnered with Texas Tech University (Fiber and Biopolymer Research Institute) to create a new platform that will deliver novel fiber solutions utilizing its Mcore product in addition to an environmentally friendly process for degumming, or delignification. The initial scope of work is to assess BastCore’s chipped core wood (hurd) composition.

“We are very excited about this research collaboration and looking forward to applying our expertise in various polymers, fibers, and biopolymers to hemp fibers and hurd. This project will target the full utilization of hemp biomass and will be based on biomass delignification and its transformation to bioproducts using a green chemistry approach. Accomplishing this goal will result in major advances in high-value products from hemp,” said Noureddine Abidi, director of the Fiber and Biopolymer Research Institute at Texas Tech University.

“We are pleased to be working with the team at Texas Tech that has decades of in-depth experience working with numerous crops utilized in the textile industry. Their successful track record will prove to add value for BastCore’s research and development efforts”, said BastCore CEO Coleman Beale.

Posted: April 6, 2021

Source: BastCore

Texprocess 2022: Trade Fair Is Back

FRANKFURT, Germany — April 6, 2022 — The garment and textile processing industry is looking forward with great anticipation to Texprocess, the leading trade fair for the sector, which will finally open its doors again in Frankfurt from June 21-24, 2022. “After three years have passed since the last Texprocess, the industry has a lot of catching up to do in terms of face-to-face communication,” said Elgar Straub, managing director of VDMA Textile Care, Fabric and Leather Technologies at the international press conference for Texprocess in Frankfurt. “Exhibitors want to show what innovations they have developed in the last three years. They have hardly had the opportunity to show these to a larger audience since the pandemic began. In turn, visitors are looking for solutions for more sustainable, more flexible and also more regional production. Accordingly, the expectations for Texprocess are enormous and linked to the hope that many necessary investments will be made. The pandemic has shown that no virtual meeting can replace face-to-face exchanges on site.”

Industry records significant increase in order intake

German manufacturers of Textile Care, Fabric and Leather Technologies ended the year 2021 with positive figures. Incoming orders increased by 35 percent in 2021 compared to the previous year. In the sewing and garment technology sector, German machinery manufacturers were also able to increase exports in 2021 by 7 percent to 439 million euros. The most important export market from a German perspective was Poland, followed by the United States and France. Exports also recovered at European level in 2021. Exports from the E.U. countries as a whole rose by 8.5 percent to 1.356 billion euros. The most important markets for E.U. exports were Germany, the United States and Poland. “Companies’ order books are well filled after the pandemic-related slumps in 2020,” Straub said. “However, rising raw material prices, massive delivery delays for precursors, expensive and difficult transport conditions, and huge increases in energy costs continue to pose major challenges for many technology manufacturers. Added to this are now the unforeseeable consequences caused by the war in Ukraine. ”

VDMA Textile Care, Fabric and Leather Technologies is the conceptual partner of Texprocess

Texprocess is the leading international trade fair for the processing of textile and flexible materials. From June 21-24, 2022, for the sixth time, international exhibitors will present to trade visitors at Texprocess the latest machinery, equipment, processes and services for garment manufacturing and textile and flexible materials. Techtextil, the leading international trade fair for technical textiles and nonwovens, and Heimtextil, the international trade fair for home and contract textiles, will be held parallel to Texprocess.

Posted: April 6, 2021

Source: VDMA

CIT Names New Business Development Leaders And Account Executive-Team Leader In Commercial Services

NEW YORK CITY — April 6, 2022 — CIT, a division of First Citizens Bank, today announced that its Commercial Services business is promoting and hiring new business development leaders to support clients and drive growth in factoring finance in the Northeast and West.

In the Northeast, Howard Moore and Paul Pagano are joining CIT’s Commercial Services group as business development directors. Both are based in New York and hold responsibility for developing, maintaining and expanding client and prospect relationships across a wide range of business verticals.

“Howard and Paul are experienced financial professionals with the expertise and skill sets needed to help grow our business,” said Tom Fingleton, managing director and northeast regional manager for CIT Commercial Services. “The addition of these leaders demonstrates CIT’s commitment to supporting our clients and continuing to drive growth in this sector.”

Moore joins CIT after most recently serving as vice president at Revolution Capital. Having specialized in multiple different industry segments, he brings 15 years of experience in factoring, asset-based lending and specialty lending, having earlier worked in development positions at various financial institutions, including Rosenthal & Rosenthal and Gerber Finance.

Pagano comes to CIT from Milberg Factors, where he served as vice president. He has 25 years of financing experience in a range of industries, including factoring and commercial finance, apparel and design. Pagano earlier served in leadership positions at Global Design Concepts, Ike Behar Apparel and Design, Le Tigre and Christian Dior Couture.

In the West, Michael Rayner has been promoted to director and team leader. Based in Los Angeles, he helps cover the western region with responsibility for leading a team of account executives in overseeing and growing their respective portfolios while also effectively managing risk and driving growth.

“Michael’s tenure with CIT and his deep experience in supporting clients make him the perfect choice to lead this team of bankers in providing factoring and other financial services throughout the region,” said Darrin Beer, managing director and western regional manager for CIT Commercial Services.

Rayner has been with CIT for over 20 years, most recently serving as a vice president, account executive in Commercial Services. He previously served as a senior underwriter at CIT and held various positions at Heller Financial including underwriter, unit manager and credit analyst. Rayner has extensive experience in portfolio management, client relations and new business generation.

Commercial Services, part of CIT’s Commercial Finance division, is one of the nation’s leading providers of working capital solutions, factoring, credit protection, accounts receivable management and lending services to consumer product companies, manufacturers, dealers, importers and resellers.

Posted: April 6, 2021

Source: CIT, a division of First Citizens Bank

Sponsors