Techtextil 2017 Exhibitor Preview: Freudenberg Performance Materials

WEINHEIM, Germany — March 30, 2017 — Efficient, safe batteries are a key factor for renewable energies to gain ground in power generation, to achieve the breakthrough in e-mobility and to supplement existing energy sources. Freudenberg Performance Materials is presenting innovative solutions for various storage technologies in Hall 3.1, Booth F37 at Techtextil 2017: ultra-thin, ceramic impregnated separators for lithium-ion batteries, gas diffusion layers for fuel cells, and high-performance electrodes for redox flow batteries. Further highlights include solutions for apparel, home textiles, automotive and building interiors.

Greater safety for lithium-ion batteries

One key to the success of e-mobility is providing more efficient and safer batteries. That is why Freudenberg developed the safety separator for lithium-ion batteries. It consists of an ultra-thin PET nonwoven impregnated with ceramic particles. It remains stable at temperatures of up to several hundred degrees Celsius and does not shrink. In comparison to conventional products, it is considerably less sensitive to mechanical penetration, particularly at high temperatures. Another plus is that using the safety separator helps to reduce the production cost of lithium-ion batteries. Higher temperatures can be used allowing accelerated preparation of the battery cells through a faster drying process and increased electrolyte impregnation speed.

Mass-produced gas diffusion layers for fuel cells

Today, fuel cells are already in use in several applications and they are considered to be a key energy source of the future. Freudenberg’s gas diffusion layers help to improve the efficiency of this technology. Their high uniformity in structure and thickness increases electrical and thermal conductivity and improves the transport of gases and liquids in the fuel cell. The outstanding product features have already been proven in numerous very different customer applications. Further strengths of Freudenberg’s gas diffusion layers compared with other products are superior downstream processing and exceptional surface properties.

Higher efficiency for redox flow batteries

Redox flow batteries are in demand wherever large amounts of energy must be stored over several hours for release at any time. For example, they can stabilize the natural output fluctuations of power generation from renewable sources. They can shave peak demand from power stations and also provide high-performance energy storage in closed systems such as solar plants in isolated locations. A key aspect is optimizing efficiency. Freudenberg’s nonwoven electrodes with a unique three-dimensional fiber structure were specially developed to improve liquid circulation in these flow batteries. These innovative electrodes have a flexible design so that they can be adapted to suit customers’ wishes.

Further innovative technical textiles

Freudenberg Performance Materials will also be showcasing the world’s first fiberball padding for the thermal insulation of sportswear and outdoor jackets, Evolon® super-microfilament textiles for pillows, duvets, sleeping bags and other quilted products, eco-friendly carrier materials for carpet tiles and printable automotive headliners.

Posted April 12, 2017

Source: Freudenberg Performance Materials

Techtextil 2017 Exhibitor Preview: Jowat

DETMOLD, Germany —  March 30, 2017 — At Techtextil 2017, Jowat is presenting powerful adhesive solutions under the headline “Service unites”. The product highlights: Latest developments in the polyurethane technology with a PUR hot melt “all-rounder” and a high-performance dispersion for the lamination of car interiors, powerful PUR hot melt adhesives for textile laminating as well as a PUR hot melt with outstanding breathability for membrane laminating.

With the motto for the trade show year 2017 “Service unites” Jowat makes it clear what the benefits from a complete service for innovative solutions are for adhesive processors: Close customer support, technical advisory service and quality control, as well as the transfer of know-how; all this through the entire process chain. In short: Understanding – Bonding – Performing.

Laminating automotive interior paneling
In addition to the tried and proven adhesive portfolio, Jowat introduces at Techtextil 2017 latest product developments for the lamination of automotive interior panelling: A powerful PUR hot melt “all-rounder” that impresses with excellent processing in all standard application methods.

The adhesive from the Jowatherm-Reaktant® product series is characterized by a fast build-up of cohesion, very good green strength, short holding and process times also at increased ambient temperatures and particularly low VOC and FOG values.

A new PU dispersion from the Jowapur® product group has been developed to be used in automatic as well as in manual processes, such as for instance the positioning of leather covering in laminating applications with real leather. The leather cover can be repositioned several times. The high-performance dispersion is characterized by very fast crosslinking, high green strength and temperature resistance, as well as low VOC and Fogging values.

Textile lamination
Powerful PUR hot melt adhesives for textile lamination facilitate highly efficient manufacturing processes while also supporting the functions of the end product. The laminating adhesives are suitable for a wide range of different applications in the textile industry due to a wide adhesion spectrum, very high green strength and optimum compound strength, also when applied in low grammages, as well as excellent resistance, for instance against exposure to mechanical stress, temperature or moisture.

Membrane lamination
For the lamination of functional textiles, Jowat has developed a highly breathable PUR hot melt adhesive which is characterized by a very good adhesion to a large variety of membranes and textiles, plus highest compound strength and washing resistance. In addition, the hot melt from the Jowatherm-Reaktant® PURTex series also delivers best results on fluorine-free treated, impregnated textiles and therefore plays a major role in the manufacture of eco-friendly clothing.

Visit Jowat at Techtextil in hall 3.0, booth H89.

Posted April 12, 2017

Source: Jowat

Techtextil 2017 Exhibitor Preview: Saurer Group — Allma

KEMPTEN, Germany — March 24, 2017 — Techtextil is the leading international trade fair for technical textiles and nonwovens and will again attract many expert visitors to Frankfurt from 9 to 12 May 2017. Allma is delighted to welcome customers and visitors to its stand D02 in hall 3.0 and inform them about the latest developments in twisting technology for industrial yarns. On the two-for-one twisting machine TechnoCorder TC2 for industrial yarns for example up to 9-ply yarn constructions can now be processed. The innovative FlexiPly device allows for the production of innovative hybrid yarns.

As a leading company in twisting and cabling of industrial yarns and tire cord, Allma sets benchmarks in terms of flexibility, productivity and quality.

High-quality premium yarns with even more flexibility
The TechnoCorder TC2 is characterized in particular by its unique flexibility in production, material and yarn counts of industrial yarns. Self-sufficient spindle drives allow for such production flexibility that individual items can be processed on each separate spindle. With the innovative FlexiPly software you can economically produce the hybrid yarn constructions expected by the market on the TechnoCorder TC2. Through the use of different materials such as polyamide and aramid and different twists, yarns with new characteristics are created for technical textiles, tires and mechanical rubber goods (MRG).

A novelty is the extension of the FlexiPly device. The new software allows for multiple constructions of up to 9-ply. The possibility of equipping the machine for processing PE-/PP tapes and monofilaments provides the customers with additional material flexibility.

The two spindle gauges 670 and 830 mm enormously widen the yarn count range from 235 to 33,000 dtex, enabling both very fine and very coarse yarns to be processed in high quality on the TechnoCorder TC2.

Maximum productivity and top quality
The delivery speed of 400 m/min is world class in twisting industrial yarns. The TechnoCorder TC2 guarantees excellent yarn quality and allows for twist packages with high density and perfect appearance thanks to the process monitoring, optimum yarn path geometry as well as gentle and low-tension thread guidance. To increase productivity even further, the High Speed Package (HSP) was developed, which increases the unwinding speed to 150 m/min (cross-wound package) and 180 m/min (flanged bobbin) when using a campanello.

Energy-optimized drives and the slim yarn balloon enhance the machine’s energy balance. The innovative spindle concept and ergonomic arrangement of the main elements ensure the particularly high operating convenience. With the new developments, Allma offers an innovative and economical production machine for bespoke customer solutions that are tailored to the highly dynamic market of technical textiles.

Posted April 12, 2017

Source: Saurer

Techtextil 2017 Exhibitor Preview: Monforts

MONCHENGLADBACH, Germany — March 6, 2017 — Monforts will demonstrate its full range of new coating units for the first time at Techtextil’17 — incorporating Knife over roller/air system; magnetic roller system; and printing head systems.

The Monforts coating range ‘texCOAT’ is now available worldwide and follows the recent acquisition of renown manufacturer Timatec; who was previously active mainly in the central European markets.

New applications and interesting references of the coating units will be presented as well including membrane- and Filter- applications.

Single sourced solutions ranging from single sided applications of finishing agents such as, for example, outdoor clothing and functionalization of textiles in the home textiles sector, through to sophisticated lightweight construction using innovative textile-based coated materials in the automotive and aerospace industries are now available.

The various coating modules can be used with or without a magnet system. For working widths above 240 cm use of a magnetic doctor blade is recommended.

The coating systems are available in four versions – basic, multi-functional, universal and multi-functional.

The basic version, for example, offers manual adjustment in two positions for air knife and roller knife coating and printing without magnet for working widths of up to 240 cm.

The Multi-functional version with two position manual adjustment is designed for magnetic knife coating with a working width of up to 240 cm and screen printing.

The Universal version features motorised adjustment with three positions for foam coating, roller knife coating and magnetic knife coating; for working widths above 240 cm.

The fourth, Multi-functional version, with three position motorised adjustment has been designed for direct fabric feed coating applications using printing templates and operating modes with roller knife and magnetic knife.         .

Monforts can also provide Ex-proof ranges for solvent-based coatings and for high temperature processes up to 320°C such as, for example, PTFE sintering.

The Monforts range of coating solutions also includes the recently introduced Montex  Allround.

Designed for constantly changing technical textile coating process applications, the systems coating modules can be quickly and easily changed by a specially designed undercarriage from the side of the unit; allowing it to be adapted for different applications.

All Monforts coating systems feature simple and user friendly PLC techniques with on-screen visualisation for all operating modes. Recipe management for different coating processes are integrated in to the proven Qualitex control system of the Montex stenter.

Monforts Technologists will also be at the show to offer expert coating advice.

Posted April 12, 2017

Source: Monforts

Techtextil 2017 Exhibitor Preview: Jakob Müller

FRICK, Switzerland — March 14, 2017 — Founded in Switzerland in 1887, Jakob Müller AG is the world’s leading company with regard to technology for the manufacture of woven and knitted tapes and webbing, woven ropes, woven labels and technical textiles, printed narrow fabrics, dyeing, make-up and winding machinery. The Müller supply program covers all the needs of the ribbons and narrow fabrics industry from individual yarn processing up to the finished, made-up product.

Exhibits on the Jakob Müller AG stand at Techtextil 2017 include:

NH2 53 2/130 S2 – electronically controlled, narrow fabric needle loom for light- to medium-weight, elastic and non-elastic narrow fabrics with unlimited repeat lengths
COMEZ ACOTRONIC 8B/600 – electronic crochet knitting machine using compound needles for ribbons, technical and medical articles
UV60-W for the measuring and winding of belts, safety belts, narrow fabrics and tubular goods

Narrow Fabric Weaving Systems

NH2 53 2/130 – electronically controlled narrow fabrics loom

 The successfully launched NH2 53 narrow fabric loom is now available on the market in the widened and strengthened NH2 53 2/130 version, which has a reed width of 130 millimeters (mm), enlarged shed and increased heald shaft lifting power (= NF heald shaft geometry). This machine type will be exhibited at Techtextil 2017.

The electronically controlled NH2 53 2/130 narrow fabric loom, which offers virtually unlimited repeat lengths, will be shown producing a bag tape with woven-in drawstring. As a result of the electronic shed formation possessing patterning possibilities employing up to sixteen electronically controlled heald shafts, a variety of bags in differing sizes can be produced on every machine space. Mechanically controlled machines do not possess this capability.

The bags can be used to carry tools or small components for assembly purposes. The drawstring is woven in during the weaving process, which means that an additional make-up phase is unnecessary.

The production costs of the machine are considerably lower owing to its energy requirement of less than 2kW, limited maintenance requirement and reduced need for spare parts, as only a few mechanical parts are employed.

Warp Crochet Knitting Systems

COMEZ ACOTRONIC 8B/600 – an electronic crochet knitting machine using compound needles

This is a high-efficiency, electronic crochet knitting machine that employs compound needles for the production of a wide range of ribbons, technical and medical textiles, both elastic and non-elastic. Compound needles make the machine highly versatile, as in addition to classic synthetic yarns (polyester, polyamide) they allow the processing of natural yarns (cotton, wool) and special fibers (Kevlar, fiberglass, carbon, basalt) in the warp.

The machine comes in several gauges, from E10 to E20, has a 600 mm working width and is fitted with eight weft bars with electronic control, which can effect weft movements of up to 34 mm.

A supplementary warp tube bar with electronic drive (BPO/STR-600) can be supplied on request. This has an electronic drive that allows the creation of various knit constructions in the warp (open lock-stitch, closed lock-stitch, etc.) that lend the fabric a lock-stitch character. More complex knit constructions (e.g. double lock-stitch) are also possible using the BPO/STR-600 together with the standard warp bar, which is driven by special cams (TRICOT/S). The machine is supplied with one feeder for elastic threads, one feeder for non-elastic threads, one feeder for warp threads and electronically controlled finished product take-off. On request, additional feeders fitted with electronic controls can be mounted on the machine for elastic or non-elastic threads.

The electronic drive applied to the feeders and the finished product take-off provides the possibility of varying stitch density values (stitches/cm) in a single product, as well as different values for weft/warp feeding and elasticity.

The COMEZ ACOTRONIC 8B/600 is fitted with the colour touch screen DATA CONTROL CONTROLLER, which manages all essential machine functions, monitors production data and enables the realization of lengthy pattern repeats. Indeed, the number of lines available for each pattern is virtually unlimited. Exclusive PC textile software completes the patterning and programming.

The machine can be fitted with the electronic, DLT/EL long throw device that can control up to three weft bars and allows the production of fabrics with long weft movement of up to the full working width along with the possibility of single pick control. In order to guarantee constant warp feeding tension, an electronically driven positive feeder can be used, which allows the setting of the quantity and tension of the yarn to be fed to the needles.

A very interesting new feature of this machine is a special embroidery device which allows to sew weft yarns into a ground fabric. This devices requires the use of piercing-compound needles and the yarns that can be processed are really numerous: Synthetic and natural yarns as well as high-performance fibres (e.g. Kevlar, fiberglass, carbon, basalt).

For warp yarns in particular, it is possible to use beams that require little space and ensure the starting steadiness of the yarns. Beam supports are available for positioning on the machine base or at a distance.

Technical Textile Make-up

The UV60-W automatic cutting and winding device

The UV60 automatic cutting and winding machine is designed for the make-up of medium-weight and heavy, non-elastic belts. Coreless rolls are wound from the start of the belt and the end can be fixed with a metal clip. Rolling from the middle of the belt is also possible with the result that both belt ends are free for further processing. The machine is also suitable for the cutting of belts to length alone.

At the fair, the machine will be shown for the first time with a new five-compartment tool changer. The tools sit on a rail and are quickly and precisely positioned over the belt using SPS control. As a result, the UV60 offers a vast range of make-up possibilities. The mature and practically tested concept is characterised by high levels of operational and service friendliness, as well as compact design. Automatically applied markings also facilitate further processing. Stored product parameters can be called up easily and permit quick and straightforward machine setting or adjustment.

The standard equipment of the UV60 includes (one piece each):

  • A sensor for belt end recognition;
  • Electronic length measurement;
  • A straight, hot knife with electronic temperature control that permits cutting temperatures of up to 450°C; and
  • Pressing device for applied melts.

The five-compartment tool changer allows the integration e.g. of a marking device, a rotatable knife for angled cutting and a perforation tool. The UV60 thus provides an enormous selection of range of processing and make-up possibilities.

The one-stop-shopping delivery program, which covers the entire process chain – everything from a single source

  • CAD;
  • Warping;
  • Narrow fabric weaving;
  • Rope weaving;
  • Warp crochet knitting;
  • Label production;
  • Textile printing;
  • Dyeing, finishing, coating;
  • Winding and make-up systems;
  • Technical textile make-up; and
  • Training.

Typical products manufactured on Müller machines include:

  • Ribbons, tapes, safety belts;
  • Zip fastener tapes;
  • Hook and loop fastening tapes;
  • Velvet ribbons;
  • Labels with woven selvedges;
  • Labels with cut selvedges (ultrasonic or thermal);
  • Knitted goods, lace articles;
  • Printed narrow fabrics such as lanyards, zips, vertical blinds, elastic underwear etc.;
  • Ropes;
  • Nets;
  • Trimmings, fringes, passementerie;
  • Medical and technical textiles;
  • Knitted fabrics for outerwear and technical uses; and
  • Knitted spacer and tubular fabrics.

Posted April 12, 2017

Source: Jakob Müller

Techtextil/Texprocess 2017 Exhibitor Preview: Groz-Beckert

ALBSTADT, Germany — April 6, 2017 — The Techtextil and Texprocess are being held from May 9-12, 2017, at the Frankfurt trade fair grounds. The Texprocess is the leading international trade fair for the garment-manufacturing and textile-processing industry; the Techtextil for technical textiles and nonwovens. Exhibitors at the Techtextil are presenting their new products under the slogan “Connecting the Future”. Groz-Beckert will be at the Techtextil presenting its comprehensive product portfolio and service offering in the areas of Knitting, Weaving, Felting, Carding and Sewing in hall 3.0 at booth F03.

In Knitting, Groz-Beckert is presenting its product portfolio for the technologies circular knitting, warp knitting and flat knitting, as well as customer-specific solutions. With system solutions from a single source, the company is responding to more stringent requirements for wear, load capacity of key components and the workability of different materials. Increased market penetration in warp knitting and the processing of materials such as metal and glass-fiber in flat-knitting mills call for custom-tailored solutions.

The Weaving department is presenting its comprehensive range of products for weaving preparation and weaving accessories at the Techtextil. A highlight of the portfolio is the PosiLeno® leno system, which boosts efficiency by up to 100 percent. Moreover, an acrylic weaving machine mock-up, the WeavingLoom, will provide insight into the operation of heald frames, healds, warp stop motions and drop wires. The jacquard heald is also demonstrated using the WeavingLoom. Made of mono wire, this product facilitates not only high densities but also a particularly gentle workmanship. In combination with the innovative thread eye, which is glued into the mono wire instead of welded, Groz-Beckert provides for uniform fabric quality and high machine efficiency.

The Weaving product portfolio is complemented by a comprehensive and worldwide service offering distinguished by expert knowledge and intensive application advice. Scores of affiliated companies in all major textile centers and a far-reaching network of representatives warrant our all-round technical service.

With its product area Felting the company puts its contribution to the nonwovens industry on display. The service life and rust resistance of felting and structuring needles have been, and are, important issues in nonwoven manufacturing. Now, Groz-Beckert is presenting its latest innovation: Groz-Beckert® dur. The patented manufacturing process of the needles in combination with a new base material improves resistance to corrosion with up to 30 percent longer service life. Moreover, the staple fiber needle punch line inaugurated in March in the Technology and Development Center at company headquarters in Albstadt is going to be presented. As a development partner, with this facility Groz-Beckert is expanding its service offering in the field of application advice.

For Spunlance customers, Groz-Beckert is presenting another new product with its HyTec® jet strips. As well as improved handling properties, the innovative jet strips also feature significantly higher hardness, which has a positive effect on all mechanical properties such as scratch resistance, bending strength and service life.

The Carding department’s focus at the Techtextil 2017 is on improved performance and on raw material savings and is presenting the high-performance worker and doffer wires SiroLock® and EvoStep®. EvoStep® card clothing features a unique slanted step undercut on the tooth front. In this area the working angle is significantly more pronounced than in conventional worker and doffer wires.

Compared to EvoStep® card clothing, which aims to reduce raw material consumption, the focus of SiroLock® card clothing is on boosting performance of the roller card via high delivery rates and nonwoven weights.

Presenting the Quality Management INH (Ideal Needle Handling) at this year’s Techtextil, the area of Sewing is waving the banner of process optimization. The patented process provides support in the handling of sewing machine needles during the entire sewing operation and has recently also been offering a digital solution to document needle breakage: the Smart INH. The documentation system consists of two pieces of software, a mobile app and a browser, thereby facilitating the digital saving and storage of data sets as potential evidence. The Mobile Lab will be another Sewing highlight. It allows material samples to be examined and analyzed directly at the Groz-Beckert booth.

Posted April 11, 2017

Source: Groz-Beckert

Yarn Expo Spring Completes Another Successful Chapter According To Organizers

HONG KONG — April 6, 2017 — Yarn Expo Spring concluded its 2017 edition last month with high satisfaction from both exhibitors and buyers. Held from March 15-17 at the National Exhibition and Convention Center (Shanghai), the fair attracted 22,579 visitors from 94 countries and regions (2016: 20,527, 77 countries and regions) to source a large variety of yarn and fiber products brought by a total of 393 exhibitors from 12 countries and regions (2016: 309, 11 countries and regions), a 10% and 27% increase, respectively. The top 10 overseas visitor countries and regions were Australia, Hong Kong, India, Indonesia, Japan, Korea, Russia, Taiwan, the United Kingdom and the United States.

Delighted with the results, Senior General Manager of Messe Frankfurt (HK) Ltd. Wendy Wen, commented: “This edition we have seen a noticeable increase in the optimism of our exhibitors about the market situation in the coming year, so we are excited about what the year holds for the industry. As well as this, many of the exhibitors we spoke with during the three days were full of praise regarding aspects of the fair that are most important to us: the quality and diversity of buyers, as well as a buyer profile that matches with exhibitors’ offerings; the opportunities to develop new business and strengthen existing relationships; the ability to expand their brand to an international audience; and the chance to grow their business in new, trending product sectors.”

Industry leaders thrilled with fair results and see Yarn Expo as the most effective marketplace in Asia

Yarn Expo has always been known by the global yarn and fibre industry as the must-join trade fair for companies eager to tap into or intensify their businesses in China as well as Asia. Trusting the influence of Yarn Expo, industry leader Birla started participating regularly since it entered the China market three years ago. “Yarn Expo has highly boosted the awareness of our brand and fibres among the textile market over these few years,” said Peter Dong, Marketing & Business Development Senior Manager, Birla Group. “Three years ago when we first entered China, there weren’t many people that knew about us, but, today, Birla is a well-known company with an increasing number of fashion garment brands appointing us to be the main supplier of their products.”

Gathering six partner companies, Birla organised its own Birla Planet pavilion once again to highlight two of its key product lines – Birla Modal and Birla Spunshades – with pleasing results. “We, including our members, are all satisfied with the overall results this time. Our booths were packed with visitors throughout the fair. Besides China, there were also buyers from Europe, America, Japan and many more. Amongst these visitors were our key target groups, such as mid-range garment manufacturers as well as fashion brands like H&M. They all hold quite strong will to have future cooperation with us.” Dong further explained: “Nowadays, more and more downstream customers, for example fashion brands and garment manufacturers, are keen to work directly with raw material suppliers to develop new products. As such, we can use this fair to directly approach these types of buyers to introduce our products. No other similar fairs can offer such opportunities nor draw as wide a variety of buyers as Yarn Expo does. That’s why this is an unparalleled marketplace for the industry.”

The India Pavilion also experienced success, with results exceeding the pavilion organisers’ expectations. Ravindranathan Narayanasamy, Joint Director of the Cotton Textiles Export Promotion Council (TEXPROCIL), the pavilion organiser, commented: “The result this year is better than we expected! The strong visitor flow kept our exhibitors busy for all three days, and many reported to us that ample opportunities were found here. After a short period of downturn, we can clearly feel that the demand for Indian products, especially in China, is growing again since last October, and we are gaining a larger market share.”

Narayanasamy continued by sharing the diverse range of buyers the exhibitors met during the fair. He added: “We saw customers from Japan, Korea, Hong Kong, the US, as well as some Middle East countries like Morocco, Tunisia and Saudi Arabia. Our exhibitors were also delighted to meet with a number of new and direct customers, such as knitting and weaving manufacturers, who are keen to buy from us directly rather than through agents.” Agreeing with Birla’s compliments on Yarn Expo, Narayanasamy said: “I would say Yarn Expo is the best yarn and fiber fair in the world in terms of scale, quality and the buyer profile. The China and Asia markets are important with unlimited business opportunities, and Yarn Expo is the most significant and effective platform to seize them.”

Exhibitors praised fair’s effectiveness for generating high-quality new business and its diverse buyer profile

Both overseas and domestic buyers were content with the number of quality new business contacts and the fair’s diverse visitor profile. “Around 90% of the contacts we received are new. This included buyers from China, Brazil, Thailand, Egypt, et cetera. We are extremely satisfied with this result, not only because of the quantity but also the impressive quality of these buyers,” said Sandjojo, Marketing Representative of the new Indonesian exhibitor PT. Bintang Asahi Textile Industry. Another new exhibitor Chemosvit Fibrochem from the Slovak Republic agreed, with its Sales Executive Lukas Haragos sharing: “A lot of visitors here were representing name-brands, and we’ve already made a number of new, high-quality contacts on the fair’s first day. While most of them were from China, buyers from Egypt, Japan, Poland and other places also visited our booth.” Haragos also mentioned their reason for exhibiting in Yarn Expo. He explained: “For us, Yarn Expo is one of the most influential yarn and fibre trade fairs in Asia, bringing the company lots of new and big opportunities. To develop future business in China, one of the most promising markets, Yarn Expo is absolutely a must.” Returning exhibitor Indus Dyeing & Manufacturing Co. Ltd. highly values the fair’s impressive buyer profile, with its Sales & Marketing Manager Abedin Ahmed Rizvi complimenting: “We are happy with the outcome this year as we met many of our target buyers from China as well as Europe, and many of them have already placed orders with us. The diverse buyer profile is no doubt one of the most remarkable traits of Yarn Expo.”

Domestic exhibitors were just as pleased as the overseas exhibitors. Jiangsu Shenghong Science and Technology Co Ltd, a well-known domestic supplier and the co-organiser of the Shenghong China Fibre Trend Area 2017-18, shared the company’s rewarding three-day fair. Its Marketing Department Specialist Chong Gu said: “We are thrilled with the visitor flow and their quality. Many genuine buyers from India, Pakistan and the US were very interested in buying our products. In fact, we have also deepened the cooperation with famous brands such as Nike, Under Amour and Decathlon by introducing our products directly to their designers. Since we first joined Yarn Expo six editions ago, the fair has effectively elevated our brand awareness among the industry and led us to the international market.” Fancy yarn exhibitor Suzhou Zhengda Textile Mill Co Ltd thought the same, with the company’s General Manager Chunrong Gu adding: “Yarn Expo has been our primary source of key customers. The majority of buyers we met this time are our target. They are all in high quality and some of them even placed orders on the spot.” In recent years, the company has been actively developing its export business; therefore, Gu was also delighted with the fair’s buyer profile. He said: “We even established some initial cooperation with fabrics manufacturers from Indonesia, India and Korea, as well as some local trading companies.”

China’s demand for Uzbek cotton growing steadily

Uzbek exhibitors affirmed the demand for Uzbek cotton in the China market continues to grow. Foremost Uzbek supplier JV “Quva Tekstil” LLC has exhibited in Yarn Expo for four years, and has witnessed the rise in popularity of Uzbek cotton at the fair. Oybek Ergashev, General Manager of the company’s Export & Import Department, said: “Cotton from Uzbekistan is very competitive and getting more popular in the China market. As such, more and more Chinese manufacturers are keen to use Uzbek cotton and this demand will grow even higher in the future. We were really busy and productive throughout the fair, and we are satisfied with the overall outcome.” Ergashev concluded by encouraging more Uzbek suppliers to join the fair. He expressed: “I recommend factories from my country to participate in Yarn Expo. This is the most effective platform for us to benefit from this high potential market.” New Uzbek exhibitor KO’KCHA Tekstil agreed, with its Sales Manager Abdurakhimov Mukhammadsiddiq stating: “Our cotton yarn is becoming more favoured among the Chinese fabric and textile manufacturers, so our export volume increases every year. Hence, we decided to take part in Yarn Expo, the most influential platform in the industry, to have direct communication with our customers and showcase our products to more Chinese buyers.” Mukhammadsiddiq further recapped their first Yarn Expo experience. He shared: “We had no time to rest during these three days because there were so many visitors in our booth. We can clearly feel their enthusiasm towards our products, and a lot of them placed sample orders.”

Baoding Kaiyuan Cotton Spinning Co Ltd is just one of the buyers who visited the fair to specifically source Uzbek cotton, with the company’s General Manager Yechao Sun sharing: “My main goal for visiting Yarn Expo is to purchase yarns from Uzbekistan suppliers. Uzbek yarns reach 80-90% of the market share in Hebei, the area I come from. For us, we think their cotton is much more attractive in terms of the price and quality. I’ve already met with some high-quality exhibitors here and will consider to have further cooperation with them.”

Fair reflected high potential of the synthetic and fancy yarn markets

Besides Uzbek cotton, synthetic and fancy yarns are also the rising stars in the industry, which several exhibitors verified in the fair. Sandjojo from PT. Bingtang Ashai mentioned: “As synthetic yarns are more cost effective, the demand is obviously much stronger now. The majority of buyers we met were looking for synthetic yarns.” Domestic exhibitor Zhangjiagang Glory Biomaterial Co. Ltd. agreed, as the company’s newly developed synthetic fibre (a high elastic plant synthetic fiber for functional fabrics) received very positive feedback during the fair, with its Business Manager Simon Zhang explaining: “Our target is the sportswear fabrics manufacturers, but we realised that there was a significant increase in e-commerce buyers sourcing our products this year. The demand is growing, and we were able to connect with a large amount of new buyers and received many high-quality enquiries over these few days.”

Driven by the hot fancy yarn market, the Fancy Yarn Zone was one of the busiest areas in the fair. Hainan Ge, General Manager of Suzhou High View Industrial Co. Ltd., commented: “So many visitors came to our booth, and they were all genuine buyers who know exactly what they need. I can feel the demand for fancy yarns is rapidly growing as there was a significant increase of buyers sourcing new types of fancy yarn this year. Xinhua Ma, President of Sundeli Dyeing Technology Co. Ltd., felt the same and shared: “It’s obvious that there were more buyers interested in our fancy yarns, and this Fancy Yarn Zone maximised our exhibit results as it helped to draw the right buyers to us.”

On the other hand, buyers affirmed the promising future of the synthetic and fancy yarn markets. Industry-leading company Zhejiang Huafu Melange Yarn Co Ltd, a leading exhibitor at the concurrent Intertextile Shanghai fair, visits Yarn Expo every year to source new innovative cotton yarns and fibers, and the company’s Deputy Manager of Product Purchasing Department Qing Qian shared: “I discovered a wide range of cutting-edge chemical fibres and fancy yarns in the fair. These kinds of yarns and fibres have very bright market prospects, and I’m eager to buy from these suppliers.” Another buyer, Chaoyang Lin, Purchasing Manager of Xiamen Feeling Textile & Garment Co Ltd, was impressed with the selection of fancy yarns on offer. He said: “The market’s sourcing volume of fancy yarns is rising recently, and I’m really excited to see such a wide selection of new fancy yarn products included in the Fancy Yarn Zone.”

Concurrent fairs add value to participants’ experiences

Yarn Expo was held concurrently with four other textile trade fairs, and a number of exhibitors praised this arrangement for offering them additional business opportunities. “We also have some knitting yarn exhibitors, and this sector is becoming more important in the market. Therefore, having the knitting fair PH Value held concurrently generated more business potential,” said Narayanasamy, organizer of the India Pavilion. “I think PH Value brings 50% more visitors to these knitting yarn exhibitors. The synergy between these two shows is prefect.” Birla gave positive feedback about the concurrent events as well, with Dong saying: “Having other textile fairs held alongside makes Yarn Expo an even better place to be. This organisation gathered industry players from the entire supply chain, creating more opportunities for us.”

Buyers also benefitted from the arrangement. “I’m visiting Yarn Expo from PH Value. The joint exhibitions are helpful for learning the whole picture of the entire industry chain, and have enriched the range of sourcing options,” said Yongmin Zhou, General Engineer of Wuhan Winsome Knitting Industrial Co. Ltd. “I found some very good quality exhibitors and placed sample orders with them already.”

The next Yarn Expo fair, Yarn Expo Autumn will take place October 11-13, 2017. Yarn Expo showcases a wide spectrum of natural and blended yarns including cotton, wool, flax/regenerated flax, silk, and man-made fibers and yarns, as well as specialty products including elastic, and fancy and blended yarns.

Yarn Expo Spring was organized by Messe Frankfurt (HK) Ltd; The Sub-Council of Textile Industry, CCPIT; China Cotton Textile Association; China Wool Textile Association; China Chemical Fiber Association; China Bast & Leaf Fibres Textiles Association; and China Textile Information Centre.

Posted April 11, 2017

Source: Messe Frankfurt Hong Kong

NAUE Asia Achieves SAMM Testing Accreditation For Geosynthetics In Accordance With ISO/IEC 17025:2005

ESPELKAMP-FIESTEL, Germany — April 7, 2017 — When the international geosynthetics manufacturer NAUE GmbH & Co. KG founded NAUE Asia Sdn. Bhd. (NASB) in Malaysia in 2011, it did so to serve infrastructure markets in Asia and Oceania—and to do so with the same high-quality standards it employs at its renowned facilities in Germany. Now, the NAUE Asia testing laboratory has achieved SAMM testing accreditation for geosynthetics, in accordance with ISO/IEC 17025:2005.

An accreditation through SAMM in accordance with ISO/IEC 17025:2005 confirms that the approved NAUE Asia facility fulfills its duties in a competent way and according to the rules. These qualifications enable the lab to serve external clients too.

“With this accreditation, we document more than the strict quality standards that we fulfill with NAUE Asia products,” says Wee Hunn Gan, NAUE Asia´s QC manager.

Gerhard Werner, NAUE Asia´s managing director adds: “We also document how we test on an independent, non-biased level, so that we can be considered as an independent lab. It allows our lab to accept external orders for geotextile testing and ensures client data confidentiality.”

The testing accreditation is overseen by Standards Malaysia.

Tests approved under the SAMM accreditation include Mass Per Unit Area (ISO 9864 / ASTM D5261), Thickness (ISO 9863-1 / ASTM D5199), Wide-Width Tensile Strength and Elongation (ISO 10319 / ASTM D4595), Tensile Test Joint/Seam (ISO 10321 / ASTM D4884), CBR Static Puncture (ISO 12236 / ASTM D6241), Water Permeability Normal to Plane (ISO 11058 / ASTM D4491), Grab Breaking Load, and Elongation (ASTM D4632) and Trapezoid Tearing Strength (ASTM D4533).

NAUE’s primary manufacturing focus in the Selangor, Malaysia plant is the Secutex® line of nonwoven geotextiles and Bentofix® geosynthetic clay liner series. The company’s nonwoven geotextiles encapsulate and are needle-punched to the high-swelling, powdered sodium bentonite core of Bentofix®, giving the GCLs exceptional durability and frictional characteristics for long-term barrier performance.

In addition to their use with GCL manufacturing, NAUE’s Secutex ® nonwoven geotextiles are used for soil separation, filtration and cushioning/protection applications. They are also used to create sand-filled Soft Rock bags, containers and tubes for coastal protection work, beach renourishment, dune protection, offshore wind turbine scour protection, and much more.

Posted April 11, 2017

Source: NAUE

Techtextil 2017 Exhibitor Preview: STINGbye

BARCELONA, Spain — April 7, 2017 — At Techtextil in Frankfurt, from May 9-12, 2017, STINGbye will present new developments of its woven anti-mosquito fabrics that were on sale for two years. The brand is famous for the elaboration of clothes bathed in permethrin, a substance that prevents that the mosquitoes bite in the skin which is applied in each of its articles. They have an efficacy up to 100 washes, are odourless and have a guarantee of 94 percent success certified by laboratories of international recognition.

STINGbye S.L. is a textile company with more than 20 years of experience in the sector. Their goal is to work on tissue efficiency to prevent that vectors are attacking us. Vectors in the medical field is everything that can transmit a disease by itching. STINGbye clothes protect of the tiger mosquito or common, lice, bedbugs and ticks. As an effect the fabrics act as a barrier against diseases like dengue fever, yellow fever or Zika.

The past 2016 STINGbye went a step further and put on sale hair ties lice protectors. “Our tie is designed to save a lot of headaches for parents and their children,” said Silvia Oviedo, general manager of STINGbye. “We saw a clear need in the market and so we decided to develop this article.” The hair tie lice protector has the same effectiveness as all STINGbye clothes and like all other fabrics they manufacture, they are 50-percent polyester and 50-percent cotton and do not cause allergies.

STINGbye items are suitable for people of all ages and are perfect clothes to enjoy outdoor activities or trips to areas exposed to mosquitoes and other vectors in complete safety.

Expanding horizons, STINGbye recently has also introduced pet clothing, such as handkerchiefs to protect dogs from vector bites.

The fabrics are certified by OEKO-TEX class I, the Swiss Tropical Institute SWISS TPH and AITEX.

Data sheet:

  • Composition: 50-percent polyester/50-percent cotton
  • Characteristics: Antiallergic, odourless, protective barrier of lice and vectors, lasting up to one hundred washes, 94-percent demonstrated efficacy.
  • Colors: Kaki, Marine, Red, Black, Pink.
  • Weight: 145 g/m²
  • Technical specifications: Woven fabric treated with permethrin.
  • Certificates: OEKO-TEX Class I, Swiss Tropical Institute SWISS TPH, AITEX

Please check out this technical breakthrough at Techtextil in Hall 6.1, Stand B59

Posted April 11, 2017

Source: StingBye

India’s Premier Fine Linens Increases Quality With Monforts Debut

MONCHENGLADBACH, Germany — April 8, 2017 — Premier Fine Linens, India’s leading producer of 100-percent fine cotton bed and table linen, is investing in a new Monforts Monfortex Sanforiser 8000 and a Thermex E-Control to enhance even further the quality and innovative potential of its production.

The company is part of the Premier Group, one of India’s oldest and largest textiles producers and, although other divisions are long-time users of Monforts technology, this is the first Monforts installation for the Fine Linens division.

The machines are being installed at the Fine Linens mill in Coimbatore, Tamil Nadu. They will handle widths of 3,200 millimeters and typically be handling weights of between 125 and 250 grams per square meter (g/m²), although heavier fabrics of up to 450 g/m² can also be handled.

Monforts’ representative in India, ATE Enterprises Private Ltd, is installing the new units.

The new installation will greatly enhance quality control of the production, which is at the very top of the fine quality segment of this market.

Premier Group is India’s largest importer of Egyptian cotton, and also uses the finest American cotton and superfine Indian cottons.

Premier Fine Linens specializes 100 percent in products made from very fine cotton yarn, which are for export only.

The company operates 375,000 spindles. Fabric production for its own in-house production and brands is 450,000 meters per month, with another 400,000 meters for contract weaving.

Vice President for Fine Linens’ production, R. Mathiyazhagan, confirmed that the division uses 100-percent cotton, organic cotton, Supima and Egyptian and Supima Tencel blend.

“All of our dyeing is done in-house, using organic dyes and low-impact chemicals. We recover, process and recirculate our own wastewater, using 99 percent of our own supplies.

“For us, and for our customers, environmental protection alongside product quality sets our standards and we like to think this is a benchmark that few other producers can match.

“Monforts will also allow us to increase the innovations and product potential that we offer to our customers. We can offer better color control, and better shrinkage.

“Much of our production is based on producing exactly what the customer wants, to the customer’s demand, and although the specifications are always naturally very exacting, our lead times can mean success or not for the customer’s concept.”

Posted April 11, 2017

Source: A. Monforts Textilmaschinen

Sponsors