TEMPE, Ariz. — August 3, 2020 — Economic activity in the manufacturing sector grew in July, with the overall economy notching a third consecutive month of growth, say the nation’s supply executives in the latest Manufacturing ISM® Report On Business®.

The report was issued today by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Management® (ISM®) Manufacturing Business Survey Committee: “The July PMI® registered 54.2 percent, up 1.6 percentage points from the June reading of 52.6 percent. This figure indicates expansion in the overall economy for the third month in a row after a contraction in April, which ended a period of 131 consecutive months of growth. The New Orders Index registered 61.5 percent, an increase of 5.1 percentage points from the June reading of 56.4 percent. The Production Index registered 62.1 percent, up 4.8 percentage points compared to the June reading of 57.3 percent. The Backlog of Orders Index registered 51.8 percent, an increase of 6.5 percentage points compared to the June reading of 45.3 percent. The Employment Index registered 44.3 percent, an increase of 2.2 percentage points from the June reading of 42.1 percent. The Supplier Deliveries Index registered 55.8 percent, down 1.1 percentage points from the June figure of 56.9 percent.

“The Inventories Index registered 47 percent, 3.5 percentage points lower than the June reading of 50.5 percent. The Prices Index registered 53.2 percent, up 1.9 percentage points compared to the June reading of 51.3 percent. The New Export Orders Index registered 50.4 percent, an increase of 2.8 percentage points compared to the June reading of 47.6 percent. The Imports Index registered 53.1 percent, a 4.3-percentage point increase from the June reading of 48.8 percent.

“In July, manufacturing continued its recovery after the disruption caused by the coronavirus (COVID-19) pandemic. Panel sentiment was generally optimistic (two positive comments for every one cautious comment), continuing a trend from June. Demand expanded, with the (1) New Orders Index growing at a strong level, supported by the New Export Orders Index re-entering expansion; (2) Customers’ Inventories Index remaining at a level considered a positive for future production, and (3) Backlog of Orders Index returning to expansion for the first time in five months. Consumption (measured by the Production and Employment indexes) contributed positively (a combined 7-percentage point increase) to the PMI® calculation, with industries continuing to expand output after May’s return-to-work actions. Inputs — expressed as supplier deliveries, inventories and imports — weakened for the third straight month, due to supplier delivery issues abating and import levels re-entering expansion. Inventory levels contracted due to strong production output, supplier delivery difficulties and inventory minimization. Inputs contributed negatively (a combined 4.6-percentage point decrease) to the PMI® calculation but were more than offset by the demand and consumption improvement, as was the case in June. (The Supplier Deliveries and Inventories indexes directly factor into the PMI®; the Imports Index does not.) Prices remained in expansion, supporting a positive outlook.

“The growth cycle continues for the second straight month after three prior months of COVID-19 disruptions. Demand and consumption continued to drive expansion growth, with inputs remaining at parity with supply and demand. Among the six biggest industry sectors, Food, Beverage & Tobacco Products remains the best-performing industry sector, with Chemical Products, Computer & Electronic Products and Petroleum & Coal Products growing respectably. Transportation Equipment and Fabricated Metal Products continue to contract, but at soft levels,” says Fiore.

Of the 18 manufacturing industries, 13 reported growth in July, in the following order: Wood Products; Furniture & Related Products; Textile Mills; Printing & Related Support Activities; Food, Beverage & Tobacco Products; Plastics & Rubber Products; Chemical Products; Apparel, Leather & Allied Products; Computer & Electronic Products; Primary Metals; Petroleum & Coal Products; Miscellaneous Manufacturing; and Electrical Equipment, Appliances & Components. The three industries reporting contraction in July are: Transportation Equipment; Machinery; and Fabricated Metal Products.

What Respondents Are Saying

“Orders starting to pick up. [An] increase of about 35 percent to 40 percent.” — Chemical Products

“Overall business remains down almost 70 percent. We are hanging on to as many employees as possible, but we will have to lay off 30 percent or more for at least two to three months until September or October.” — Transportation Equipment

“While demand in the coming six months is stabilizing, it is at a significant reduction and clear that customers have little confidence in the forecasts. Export orders to Brazil, South Africa, [and the] Middle East are largely cancelled for balance of 2020.” — Fabricated Metal Products

“Manufacturing outlook has improved greatly in June, as business has resumed at nearly 100 percent. We have implemented a number of safeguards that are costing extra money, but we are running.” — Computer & Electronic Products

“Stabilizing demand for refrigerated and frozen beverage and dessert, but still at higher level than a year ago. Uncertainty of school opening in the fall: How much demand will continue or shift will be dictated by students returning to school or not.” — Food, Beverage & Tobacco Products

“Uncertainty regarding our industry and business has not improved. We are developing the 2021 budget around multiple scenarios.” — Petroleum & Coal Products

“Incoming orders are slow. This is usually our busiest time of the year, but production is reduced due to lack of demand. Additional layoffs expected.” — Furniture & Related Products

“General business climate continues to be subdued, driving highly conservative forecasting due to variability in the ongoing pandemic-driven conditions and economic response.” — Machinery

“We are still seeing our customers shut down or effected by COVID-19. We are hoping for a bounce back in September.” — Miscellaneous Manufacturing

“General business conditions are in a general slowing pattern. Many of the plants are on reduced hours and/or furloughs. About 20 percent to 25 percent of plants are scheduled to be consolidated in the next six months to improve margins and profitability.” — Nonmetallic Mineral Products

Manufacturing ISM® Report On Business® data is seasonally adjusted for the New Orders, Production, Employment and Inventories indexes.

*Number of months moving in current direction.

Commodities Reported Up/Down In Price And In Short Supply

Commodities Up in Price 
Aluminum (2); Copper (2); Crude Oil (3); Diesel Fuel (2); High-Density Polyethylene; Lumber; Oil-Based Products; Plastic Products; Polypropylene; and Precious Metals.

Commodities Down in Price 
Diesel Fuel (5); Steel — Hot Rolled; and Steel Products (4).

Commodities in Short Supply 
Alcohols; Personal Protective Equipment (PPE) (3); PPE — Gloves (5); PPE — Masks; and Sanitizers & Disinfectants (2).

Note: The number of consecutive months the commodity is listed is indicated after each item.

July 2020 Manufacturing Index Summaries

PMI®

Manufacturing grew in July, as the PMI registered 54.2 percent, 1.6 percentage points higher than the June reading of 52.6 percent. “The PMI signaled a continued rebuilding of economic activity in July and reached its highest level of expansion since March 2019, when the index registered 54.6 percent. Four of the big six industry sectors expanded. The New Orders and Production indexes returned to strong expansion levels. The Supplier Deliveries Index remained at a more normal level of tension between supply and demand. Seven of the 10 subindexes registered expansion, up from five in June,” Fiore said. A reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally contracting.

A PMI above 42.8 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the July PMI indicates the overall economy grew in July for the third consecutive month following contraction in April. “The past relationship between the PMI and the overall economy indicates that the PMI for July (54.2 percent) corresponds to a 3.3-percent increase in real gross domestic product (GDP) on an annualized basis,” Fiore said.

The Last 12 Months

New Orders

ISM’s New Orders Index registered 61.5 percent in July, an increase of 5.1 percentage points compared to the 56.4 percent reported in June. This indicates that new orders grew for the second consecutive month. “All of the top six industry sectors (Chemical Products; Food, Beverage & Tobacco Products; Fabricated Metal Products; Petroleum & Coal Products; Transportation Equipment and Computer & Electronic Products) expanded. Demand improved in July, as demonstrated by 13 industry sectors expanding and only two contracting. The index achieved its highest level of performance since September 2018 (61.8 percent),” Fiore said. A New Orders Index above 52.5 percent, over time, is generally consistent with an increase in the Census Bureau’s series on manufacturing orders (in constant 2000 dollars).

Of the 18 manufacturing industries, the 13 that reported growth in new orders in July — in the following order — are: Wood Products; Furniture & Related Products; Primary Metals; Plastics & Rubber Products; Chemical Products; Electrical Equipment, Appliances & Components; Food, Beverage & Tobacco Products; Fabricated Metal Products; Petroleum & Coal Products; Miscellaneous Manufacturing; Transportation Equipment; Computer & Electronic Products; and Machinery. The two industries reporting a decline in new orders in July are: Textile Mills; and Paper Products.

Production

The Production Index registered 62.1 percent in July, up 4.8 percentage points from 57.3 percent in June, indicating growth for the second consecutive month. “Five of the top six industries expanded strongly and none contracted, a marked improvement from June. The index achieved its highest level of performance since August 2018, when it registered 63.1 percent,” says Fiore. An index above 51.7 percent, over time, is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures.

The 16 industries reporting growth in production during the month of July — listed in order — are: Primary Metals; Wood Products; Textile Mills; Furniture & Related Products; Printing & Related Support Activities; Plastics & Rubber Products; Chemical Products; Electrical Equipment, Appliances & Components; Food, Beverage & Tobacco Products; Computer & Electronic Products; Nonmetallic Mineral Products; Fabricated Metal Products; Paper Products; Machinery; Transportation Equipment; and Miscellaneous Manufacturing. No industries reported a decrease in production in July.

Employment

ISM’s Employment Index registered 44.3 percent in July, 2.2 percentage points higher than the June reading of 42.1 percent. “This is the 12th consecutive month of employment contraction, at a slower rate compared to June. Only one of the six big industry sectors experienced expansion, as factories were able to achieve significant gains in output with a reduced labor pool. Long-term labor market growth remains uncertain, but strong new-order levels and an expanding backlog signify potential strength for the rest of the third quarter,” Fiore said. An Employment Index above 50.8 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.

Of the 18 manufacturing industries, the five industries to report employment growth in July are: Apparel, Leather & Allied Products; Printing & Related Support Activities; Furniture & Related Products; Plastics & Rubber Products; and Computer & Electronic Products. The 10 industries reporting a decrease in employment in July, in the following order, are: Transportation Equipment; Paper Products; Electrical Equipment, Appliances & Components; Primary Metals; Textile Mills; Petroleum & Coal Products; Chemical Products; Miscellaneous Manufacturing; Fabricated Metal Products; and Machinery.

Supplier Deliveries†

The delivery performance of suppliers to manufacturing organizations was slower in July, as the Supplier Deliveries Index registered 55.8 percent. This is 1.1 percentage points lower than the 56.9 percent reported in June. “Suppliers continue to struggle to deliver, although at a slower rate compared to June. Plant interruptions, transportation challenges and continuing difficulties in supplier labor markets are still factors. The Supplier Delivery Index continues to reflect a healthier supply/demand balance compared to spring and early summer,” Fiore said. A reading below 50 percent indicates faster deliveries, while a reading above 50 percent indicates slower deliveries.

Twelve of 18 industries reported slower supplier deliveries in July, listed in the following order: Textile Mills; Petroleum & Coal Products; Nonmetallic Mineral Products; Wood Products; Miscellaneous Manufacturing; Furniture & Related Products; Paper Products; Computer & Electronic Products; Food, Beverage & Tobacco Products; Machinery; Chemical Products; and Fabricated Metal Products. The two industries reporting faster supplier deliveries in July are: Primary Metals; and Electrical Equipment, Appliances & Components.

Inventories

The Inventories Index registered 47 percent in July, 3.5 percentage points lower than the 50.5 percent reported for June. Inventories contracted after two consecutive months of expansion. “Inventory levels were impacted by increases in production output and restrained by continuing supplier difficulties. Panelists also indicated restraint in increasing inventories due to uncertainty in overall future market demand,” Fiore said. An Inventories Index greater than 44.3 percent, over time, is generally consistent with expansion in the Bureau of Economic Analysis (BEA) figures on overall manufacturing inventories (in chained 2000 dollars).

The three industries reporting higher inventories in July are: Food, Beverage & Tobacco Products; Paper Products; and Miscellaneous Manufacturing. The nine industries reporting a decrease in inventories in July — listed in order — are: Primary Metals; Nonmetallic Mineral Products; Fabricated Metal Products; Machinery; Plastics & Rubber Products; Electrical Equipment, Appliances & Components; Chemical Products; Computer & Electronic Products; and Transportation Equipment. Six industries reported no change in inventories in July compared to June.

Customers’ Inventories†

ISM’s Customers’ Inventories Index registered 41.6 percent in July, 3 percentage points lower than the 44.6 percent reported for June, indicating that customers’ inventory levels were considered too low. “Customers’ inventories are too low for the 46th consecutive month and moved further into ‘too low’ territory in July, a positive for future production,” Fiore said.

Of the 18 industries, the two reporting higher customers’ inventories in July are: Petroleum & Coal Products; and Furniture & Related Products. The 13 industries reporting customers’ inventories as too low during July — listed in order — are: Wood Products; Fabricated Metal Products; Paper Products; Plastics & Rubber Products; Primary Metals; Food, Beverage & Tobacco Products; Machinery; Textile Mills; Electrical Equipment, Appliances & Components; Nonmetallic Mineral Products; Chemical Products; Transportation Equipment; and Computer & Electronic Products.

Prices†

The ISM Prices Index registered 53.2 percent, 1.9 percentage points higher than the June reading of 51.3 percent, indicating raw materials prices increased for the second consecutive month. “Price increases were driven primarily by plastics, lumber, aluminum, copper and petroleum products. Price growth remains at a stable supplier/buyer relationship,” Fiore said. A Prices Index above 52.5 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) Producer Price Index for Intermediate Materials.

The 10 industries reporting paying increased prices for raw materials in July — listed in order — are: Textile Mills; Primary Metals; Wood Products; Plastics & Rubber Products; Paper Products; Computer & Electronic Products; Food, Beverage & Tobacco Products; Chemical Products; Miscellaneous Manufacturing; and Machinery. The two industries reporting a decrease in prices for raw materials in July are: Transportation Equipment; and Fabricated Metal Products. Six industries reported no change in prices in July compared to June.

Backlog of Orders†

ISM’s Backlog of Orders Index registered 51.8 percent in July, a 6.5-percentage point increase compared to the 45.3 percent reported in June, indicating order backlogs expanded after four consecutive months of contraction. “The return of backlog expansion is a positive for the future. Backlog expansion indicates that new-order intake was sufficient to offset production output and grow backlog during the period. Three of the six big industry sectors’ backlogs expanded, an improvement from June. The index achieved its highest level of expansion since April 2019 (53.9 percent),” Fiore said.

The 10 industries reporting growth in order backlogs in July, in the following order, are: Wood Products; Plastics & Rubber Products; Primary Metals; Nonmetallic Mineral Products; Paper Products; Fabricated Metal Products; Food, Beverage & Tobacco Products; Chemical Products; Machinery; and Electrical Equipment, Appliances & Components. In July, four industries reported lower backlogs: Textile Mills; Transportation Equipment; Computer & Electronic Products; and Miscellaneous Manufacturing.

New Export Orders†

ISM’s New Export Orders Index registered 50.4 percent in July, up 2.8 percentage points compared to the June reading of 47.6 percent. “The New Export Orders Index expanded modestly after four straight months of contraction, with two of the six big industry sectors expanding. New export orders were a positive factor to the growth in new orders,” Fiore said.

The six industries reporting growth in new export orders in July — in the following order — are: Furniture & Related Products; Wood Products; Computer & Electronic Products; Plastics & Rubber Products; Chemical Products; and Miscellaneous Manufacturing. The four industries reporting a decrease in new export orders in July are: Nonmetallic Mineral Products; Fabricated Metal Products; Paper Products; and Machinery. Seven industries reported no change in new export orders in July compared to June.

Imports†

ISM’s Imports Index registered 53.1 percent in July, up 4.3 percentage points compared to the 48.8 percent reported for June. “Imports expanded after five consecutive months of contraction, reflecting increased U.S. demand. The index reached its highest level of expansion since February 2019, when it registered 55.3 percent,” Fiore said.

The 11 industries reporting growth in imports in July — in the following order — are: Apparel, Leather & Allied Products; Printing & Related Support Activities; Wood Products; Textile Mills; Fabricated Metal Products; Furniture & Related Products; Plastics & Rubber Products; Chemical Products; Electrical Equipment, Appliances & Components; Machinery; and Food, Beverage & Tobacco Products. The two industries reporting a decrease in imports in July are: Primary Metals; and Miscellaneous Manufacturing.

†The Supplier Deliveries, Customers’ Inventories, Prices, Backlog of Orders, New Export Orders and Imports indexes do not meet the accepted criteria for seasonal adjustments.

Buying Policy

Average commitment lead time for Capital Expenditures increased by four days in July to 136 days. Average lead time for Production Materials increased by three days to 66 days. Average lead time for Maintenance, Repair and Operating (MRO) Supplies decreased by one day to 35 days.

Posted August 3, 2020

Source: The Institute for Supply Management® (ISM®)

ALEXANDRIA, Va. — July 31, 2020 — Alsco Inc. — an international linen and uniform-rental provider to healthcare organizations, automotive and industrial facilities around the world — has recently achieved the Hygienically Clean Healthcare certification for its facilities located in these cities: San Jose and Santa Rosa, Calif.; North Las Vegas; and St. George, Utah. These locations join the following Alsco facilities that also carry the Hygienically Clean Healthcare certification: Sacramento, San Diego, and San Francisco facilities in Calif.; Washington, D.C.; Shreveport, La.; Carson City, Nev.; and the Charlotte, Durham, and Raleigh facilities in N.C. Hygienically Clean is the quantified, validated standard and measure for hygienically clean textiles in North America since 2011,  and achieving this certification reflects its commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing based on established hygienically clean healthcare textile methods and standards.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

• Employees are properly trained and protected;
• Managers understand regulatory requirements;
• OSHA-compliant; and
• Physical plant operates effectively.

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly RODAC and semi-annual USP 62 testing (RODAC results less than or equal to 20 cfu per square diameter and USP 62 results must show an absence of specified microorganisms) to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced by TRSA in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for Hygienically Clean healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

“Congratulations to Alsco on their certifications,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their commitment to infection prevention and that their laundries take every step possible to prevent human illness.”

Hygienically Clean reflects the evolution of healthcare laundry certification in light of growing global concerns about infection control, documenting practices that ensure elimination of potentially harmful microbial content while adding quantifiable verification of continuous improvement in overall cleanliness.

Posted July 31, 2020

Source: TRSA