Home    Resource Store    Past Issues    Buyers' Guide    Career Center    Subscriptions    Advertising    E-Newsletter    Contact

Textile World Photo Galleries
November/December 2015 November/December 2015

View Issue  |

Subscribe Now  |


From Farm To Fabric: The Many Faces Of Cotton - The 74th Plenary Meeting of the International Cotton Advisory Committee (ICAC)
12/06/2015 - 12/11/2015

Capstone Course On Nonwoven Product Development
12/07/2015 - 12/11/2015

2nd Morocco International Home Textiles & Homewares Fair
03/16/2016 - 03/19/2016

- more events -

- submit your event -

Printer Friendly
Full Site
Textile News

Karl Mayer Runs PPD Fabric Trial, Reissues HKS 4-M EL Tricot Machine

Germany-based Karl Mayer Textilmaschinenfabrik recently tested the quality of lace fabric produced on a L 59/1 B Jacquardtronic Lace machine featuring Positive Patternbeam Drive (PPD) versus fabric produced on the same machine fed by a traditional creel.

To test fabric quality, a fabric design was produced first using a creel on the Jacquardtronic Lace machine. In the second trial, the same design was produced on the machine featuring six pattern beam mounting rails that each held eight pattern beams. In both trials, the yarn was feed at a speed of 850 m/min.

According to the company, no difference in product quality was apparent, and the PPD allowed controlled yarn feed at speeds of up to 850 meters/min (m/min), which is faster than the 600 m/min the pattern beam previously allowed without causing looping and distortion in the yarn.

Karl Mayer cites the following advantages to using PPD versus a creel: lower space requirements mean shorter yarn paths with simple, quick changeover procedures; lower capital costs; minimal storage space requirements; constant yarn tension; increased efficiency; fewer machine stoppages for adjustments; less manpower to operate; and increased fabric quality.

In other company news, Karl Mayer has reissued its HKS 4-M EL tricot machine at a cheaper price point. The machine now features the EL drive system, as well as an improved motor and changes to the Pattern Control function management. According to the company, these changes make the HKS 4-M EL machine efficient and flexible, and an attractive investment.

January 15, 2013