Teijin Develops Radiation Shielding Aramid Fabric
The newly developed product, radiation shielding Technora fabric, is produced by blending radiation-shielding tungsten particles with Technora high-strength para-aramid fiber that is produced and sold by Teijin.
The new product offers the following key features:
- Due to the superior strength and modulus of para-aramid fiber, the product is stronger than polyester and other general-purpose fibers despite containing high concentrations tungsten, a high-density metal that tends to impair the fiber's mechanical properties.
- The level of radiation shielding corresponds to the amount of tungsten blended into the aramid fiber.
- Fabric products offer excellent flexibility and workability for use in way not possible with lead plates or concrete.
In addition, tungsten-blended Technora fabric exceeds the already high levels of flame retardancy and cutting resistance exhibited by the regular Technora aramid fiber. As such, Teijin expects its new fabric to be used in materials and protective clothing for people handling high-temperature objects and/or sharp-edged rubble, tools and so on.
While it is generally difficult to produce filament yarn by blending a high-density metal with fiber, Teijin has overcome this challenge by leveraging its spinning know-how and the inherent properties of Technora. The uniform blending of tungsten and fibers is achieved with Teijin's well-established polymer and spinning technologies.
Teijin's high-strength para-aramid fibers Twaron and Technora and meta-aramid fiber Teijinconex, which offers superior long-term heat resistance and flame retardancy, are available for a wide range of solutions where enhanced protection is required, such as law enforcement, firefighting and manufacturing. In Japan, where the Great East Japan Earthquake of 2011 has raised concerns about radiation in the region due to damaged nuclear reactors, Teijin believes that its new aramid fabric will provide solutions that help to ensure the safety of workers involved in reconstruction.
Lead and lead-containing materials are typically used to shield against radiation because lead is comparatively inexpensive and exhibits excellent shielding. However, due to concerns about the environmental impact of lead, movements are underway to regulate its global use. Tungsten is now being used as an alternative for radiation shielding because it has relatively little impact on the human body or the environment.
Tungsten for radiation shielding is available in the form of fiber and sheet, and in hybrid materials such as resin or rubber blended with tungsten. It has been difficult to produce a tungsten hybrid in the form of fiber, however, due to problems with blending fiber with a high-density metal like tungsten. In addition, high-density metal blended in a high concentration with fiber using conventional methods tends to lose its strength and modulus.
Posted on April 30, 2013
Source: Teijin Ltd.