USTER® STATISTICS 2013 Is Out On uster.com
In 1957, Uster Technologies started to publish only a few tables for cotton and wool. USTER has expanded the content to more than 2200 charts over the past 55 years - always with the ambition to provide USTER® STATISTICS for all kinds of material available in the market. Today, more than 30 major yarn styles are presented. New yarn styles in the latest edition 2013 are plied yarns and more blends of air-jet yarns.
The new edition of 2013
The highlights of USTER® STATISTICS 2013 are the inclusion of data for USTER® CLASSIMAT 5 and USTER® ZWEIGLE HL400. While USTER® CLASSIMAT 5 measures and classifies disturbing yarn defects, foreign fibers and vegetable matter, the USTER® ZWEIGLE HL400 provides data of the length of protruding fibers.
A major requirement for the USTER® CLASSIMAT graphs was to differentiate the yarn counts. So the graphs for USTER® CLASSIMAT 5 are class-divided in three yarn count levels (fine, medium, coarse). As mentioned, it is the goal of Uster Technologies to publish new and innovative quality parameters. So, for the first time, graphs are available for foreign fiber, with separate vegetable matter results, and for outliers.
Relation between price performance ratio and USTER® STATISTICS
All new and old features aim for the one goal to support the users to reach the ideal price performance ratio - especially for spinning mills. It is essential to compare objectively in-house performance versus global best practice. With the help of USTER® STATISTICS, the spinning mill can identify performance gaps. The parameters can easily be used as key performance indicators for spinning process optimization.
Another benefit for the spinning mill is an increase in its competitive position, since USTER® STATISTICS enable mills to declare objectively what they are producing and selling. Spinning mills can prove yarn quality levels when tested on USTER® equipment, because of direct comparison with USTER® STATISTICS.
Also for yarn users USTER® STATISTICS are useful to optimize the costs. Changes in the industry through globalization have been dramatic. Fashion is changing fast. Quick deliveries are needed. Quality costs at all levels of the textile supply chain have increased. Higher quality costs may be caused not only by wrong selection of the yarn for a certain article but also by poor performance of the yarn. USTER® STATISTICS are traditionally used to predict the quality of the fabric at an early stage, to avoid expensive additional costs due to second quality.
Many retailers have concluded that their existing system of ordering garments was not sufficient to guarantee the production of final products of constant quality. To achieve consistency, they have started to formulate quality requirements in what are called 'yarn quality profiles', based on USTER® STATISTICS. Experience has determined the quality levels appropriate for each application.
Worldwide established benchmarks become the common quality language
The new edition of the unique USTER® STATISTICS is now available on uster.com (service section). Also the release of USTER® STATISTICS 2013 will underline their benefits as a vital success factor for textile companies, providing a common language to define precise quality factors along the entire production chain. Yarn producers, buyers and retailers all rely on USTER® STATISTICS as the basis for trading and a foundation for industry-wide quality improvement. 'Quality improvement always goes along with cost saving and price increase for the produced material. Therefore it is sure that all users will benefit again from the USTER® STATISTICS 2013', says Thomas Nasiou, Head of Textile Technology within USTER.
Posted December 11, 2012